基于机器学习的超声造影分析综述

超声造影（Contrast-enhanced ultrasound, CEUS）通过外周静脉注入超声造影剂,显著增强来自肿瘤微血管的血流信号,便于临床医生以实时、动态的方式评估肿瘤血管生成、周边浸润等,广泛应用于多器官病变诊断、预后评估和治疗方案规划等方面。近年来,以深度学习为代表的机器学习方法快速发展,为动态超声造影智能分析带来新的机遇。深度学习方法很大程度上拓宽了超声造影临床应用范围,提高了其诊疗效能。但与常规超声影像类似,超声造影仍然存在斑点噪声、呼吸运动干扰和标准化程度低等问题,使得动态灌注时间、空间信息挖掘面临挑战。本文系统性回顾了近年来超声造影智能分析相关工作,涵盖良恶性鉴别、恶性分级、疗效预测和诊疗方案选择等方面应用,总结了当前影像组学及深度学习方法在超声造影分析领域的最新进展,并指出当前研究的局限性和未来发展方向。     

Study on reaction time depending on display parameters of gaming displays

Display technology plays a significant role in gaming and, thus, display parameters are an important consideration when choosing a gaming display. In general, interest in display parameters such as contrast ratio, response time, refresh rate, and input lag in gaming displays is very high. In this article, we studied the reaction time of gaming displays, as a measure of game performance, with respect to different contrast ratios, response times, and refresh rates. Contrast ratio and response time turned out to be the key factors influencing reaction time. The higher the contrast ratio is, the shorter the reaction time tends to be. In addition, the faster the response time is, the shorter the reaction time is. Displays with high contrast ratio and fast response time are advantageous in terms of reaction time, which is also expected to be more advantageous in a fast-paced real gaming environment.     

基于信息年龄的变电站业务无线接入选择算法

为更好满足变电站中大规模设备接入和高可靠低时延业务传输需求,提出了一种适用于变电站业务的多频异构无线通信网络接入选择算法。首先构造了一个异构无线网络覆盖下的变电站场景模型,综合考虑变电站业务对于可靠性和有效性的需求。其次为有效提升接收到信息的新鲜程度,以平均信息年龄（Average Age of Information,AAoI）作为无线网络接入选择的优化目标函数,提出了基于信息年龄的变电站业务接入选择优化问题。最后利用深度Q学习（Deep Q-Learning,DQN）方法求解该问题,以获得最佳的接入选择方案。通过对应用实例与试验数据的分析可以看出,所提出的接入选择优化理论和算法,可以降低业务传输时的平均信息年龄,提升数据的新鲜程度。     

一种轴向风冷结构对高速永磁电机转子温升的抑制研究

在变频器驱动方式下,高速永磁电机具有较大的转子涡流损耗,由于其转子的散热能力较差,易使永磁体温升较高,而发生不可逆失磁现象。采用机壳水冷结构可以有效地带走电机定子侧的热量,但是对于高速永磁电机的转子部位,水冷结构的冷却效果有限。以一台15 kW、30 000 r/min的高速永磁电机为例,设计了一种风、水混合冷却结构,基于流固耦合的计算方法分析了水速、风向以及不同风道截面积对电机永磁体部位温升的影响,并得出了相对的最优值。与仅采用水冷结构相比,增加该风冷结构可使永磁体温升降低了18.1 K,该结构可对大功率高速永磁电机的冷却系统设计提供一定的参考。     

低温环境下FBG温度传感特性研究

在低温环境中,光纤光栅(Fiber Bragg Grating,FBG)材料的热膨胀系数和热光系数会发生改变,从而影响其温度传感特性。文章通过实验研究了裸光纤光栅传感器和黄铜管封装的光纤光栅传感器在低温下的温度传感特性。结果表明,在80~300 K温度范围,裸FBG温度传感器的灵敏度为6.43 pm/K,线性度为0.974,在80~230 K温度范围,温度与光纤光栅的中心波长呈现非线性关系;黄铜管封装的FBG温度传感器,在整个温度范围内灵敏度可达26 pm/K,线性度为0.996,较裸FBG温度传感器均有较大提升。对比实验表明,对光纤光栅进行封装,可以提高其温度灵敏度和线性度,改善温度传感特性。     

基于改进免疫粒子群优化算法的室内可见光通信三维定位方法

针对室内可见光通信中3维定位精度不高和定位时间较长的问题,该文提出基于改进免疫粒子群(IIMPSO)算法的室内可见光通信(VLC)3维定位方法.通过分析室内多径效应,选取合适的视场角(FOV)以减少反射影响,同时完善了倾斜状态下的定位模型,并采用卡尔曼滤波算法以降低环境干扰对接收功率的影响,在此基础上与改进的免疫粒子群算法相融合.仿真结果表明,在5 m×5 m×3 m的室内环境中,该文所提出的3维定位系统平均定位误差为0.031 m,定位时长为2.3 s.与现有的3维定位系统进行比较,其定位精度与收敛速度均得到明显改善.     

Face anti-spoofing based on multi-modal and multi-scale features fusion

Face anti-spoofing is used to assist face recognition system to judge whether the detected face is real face or fake face. In the traditional face anti-spoofing methods, features extracted by hand are used to describe the difference between living face and fraudulent face. But these handmade features do not apply to different variations in an unconstrained environment. The convolutional neural network (CNN) for face deceptions achieves considerable results. However, most existing neural network-based methods simply use neural networks to extract single-scale features from single-modal data, while ignoring multi-scale and multi-modal information. To address this problem, a novel face anti-spoofing method based on multi-modal and multi-scale features fusion ( MMFF) is proposed. Specifically, first residual network ( Resnet )-34 is adopted to extract features of different scales from each modality, then these features of different scales are fused by feature pyramid network (FPN), finally squeeze-and-excitation fusion ( SEF) module and self-attention network ( SAN) are combined to fuse features from different modalities for classification. Experiments on the CASIA-SURF dataset show that the new method based on MMFF achieves better performance compared with most existing methods.