钎焊时压力载荷对金刚石接头残余应力的影响

针对金刚石与其他材料连接时接头处容易产生较大的应力而导致接头连接强度下降的问题，采用Marc有限元分析方法，模拟了用Ag—Cu—Ti钎料钎焊金刚石与硬质合金接头的应力分布情况，研究了试件在钎焊过程加载和不加载时对应力分布的影响．结果表明，对试件施加一定的裁荷比未加载荷时接头的最大残余应力值小，且模拟结果具有较高的准确性，为确定实际工艺参数提供了依据．     

预制挑檐的几种构造作法

挑檐是建筑屋面的一个组成部分。本文介绍了挑檐自重平衡法、屋面板压重平衡法、圈梁压重平衡法、螺栓锚固法等四种预制挑檐的构造 ,在施工过程中应根据现场环境合理选用     

安钢3#高炉优化操作的生产实践

为稳定高炉炉况，改善高炉操作指标，安钢3^#高炉进行了优化操作实践，取得了较好的效果。     

金属粉末在药型罩中的应用

药型罩材料的性能直接影响着聚能效应的发挥。本文综合近年来国内外粉末药型罩的研究发展情况 ,详细介绍了铜、钨、钼、钽、铋等金属粉末在药型罩中的应用     

淬火冷却速度对碳素钢显微组织的影响

在Gleeble2000热模拟实验机上对普通碳素钢Q235进行了不同温度的单道次变形实验，对变形后的试样采用三种不同的介质以不同冷却速度进行淬火，分别为水、-60℃的干冰酒精溶液和含50％NaCl的冰盐水。实验结果表明，不同冷却速度对淬火后的组织状态影响很大。在冰盐水中淬火，钢的淬透性较高，变形后原始奥氏体状态基本上得到保留。在干冰酒精中淬火钢的淬透性最差。     

450MPa级超细组织耐大气腐蚀钢板的开发与研制

利用变形诱导铁素体相变超细组织控制技术，通过对09CuPTiRE钢进行Nb微合金化并进行控制轧制和冷却，开发研制了晶粒尺寸为3．5～4．8pm、屈服强度达450MPa级的高强度超细组织耐大气腐蚀钢板。研究结果表明，该钢具有良好的成形、焊接和耐大气腐蚀等性能。     

Citrate-Gel Synthesis and Luminescent Properties of α-Zn3 （PO4）2 Doped with Eu^3＋

By using inorganic salts as raw materials and citric acid as complexing agent, α-Zn3(PO4)2 and Eu^3 doped α-Zn3( PO4)2 phosphor powders were prepared by a citrate-gel process. X-ray diffraction (XRD), TG - DTA, FF - IR and luminescence excitation and emission spectra were used to characterize the resulting products. The results of XRD reveal that the powders begin to crystallize at 500℃ and pure α-Zn3(PO4)2 phase is obtained at 800℃. And the results of XRD reveal that Eu^3 exists as EuPO4 in the powder. In the phosphor powders, the Eu^3 shows its characteristic red-orange(592 nm, ^5D0 -^7F1) emission and has no quenching concentration.     

一种基于Web服务的产品推荐系统模型

为了弥补传统的电子商务系统在智能性和扩展性等方面的不足,我们提出了一种基于Web服务的产品推荐系统,该系统能够从电子商务系统的交易日志中挖掘商品的关联规则,并动态地向用户提供产品推荐服务。     

Morphologies and Properties of Micro-Arc Oxidation on Plate and Cylinder 2024 Al Alloy

Samples with two different shapes of 2024 aluminum alloy were treated with micro-arc oxidation (MAO), and the formation process and mechanism of oxidation film was analyzed. The results show that different geometrical curvature of the material has an influence upon the uniformity of films and the corrosion-resistance.     

Influence of Si on Interfacial Combination of SiCp/Al-Mg-Si Composite

The scanning electron microscopy (SEM) analysis results of Si distribution in the interface between SiC reinforcements and aluminum matrix of a stir casting SiCp/Al-Mg-Si composite were presented. Results show that there is Si precipitation deposit on the interface of the composite and Si connects with SiC reinforcements in one side and connects with aluminum matrix in the other side. Si phase plays as a connecting bridge, which contributes to the interfacial combination of SiCp/Al composite.