Influence of mixing cycle on the degree of mixing of calcite‐filled polyethylene upon stretching

The mixing cycle‐dependent degree of dispersion and degree of mixing of a calcite (calcium carbonate) agglomerate in high‐density polyethylene (HDPE), low‐density polyethylene (LDPE), and linear low‐density polyethylene (LLDPE) matrices upon stretching was investigated using three different techniques: mechanical property, morphological behavior, and image analyzer analyses. The mechanical properties analyzed in terms of the tensile strength and maximum elongation resulted in that the second mixing was the best for giving a better property for all systems except the LDPE system, which exhibited no significant difference between the second and third mixings. The morphological behavior of the three compounds were different, but no distinctive difference was observed to differentiate the degree of mixing from system to system. The number‐, weight‐, and z + 1‐average diameters of the air hole and the aspect ratio upon the stretching and mixing cycle were calculated to analyze the degree of mixing of the calcite‐filled composites. As a consequence, no difference in the average diameter of the air hole was obtained among the three systems, but the aspect ratios of the air hole varied significantly. Thus, the degree of dispersion and the degree of mixing may be influenced by the average calcite agglomerate size, the average diameter of the air hole, and the aspect ratio upon stretching and mixing cycles. Those factors would be formed by the difference in chemical characteristics upon various microstructures of polyethylene and its molecular weight and molecular weight distribution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 311–321, 2003     

Cure kinetics and mechanical properties of the blend system of epoxy/diaminodiphenyl sulfone and amine terminated polyetherimide-carboxyl terminated poly(butadiene-co-acrylonitrile) block copolymer

The cure kinetics of blends of epoxy resin (4,4’-tetraglycidyl diaminodiphenyl methane; TGDDM)/curing agent (diaminodiphenyl sulfone; DDS) with ATPEI (amine terminated poly-etherimide) -CTBN (carboxyl terminated poly (butadiene-co-acrylonitrile)) block copolymer (AB type) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction kinetic parameters such as activation energy and reaction constants. Final cure conversion decreased with increasing amount of AB in the blends. A diffusion controlled reaction was observed as the cure conversion increased, and the curing reaction was successfully analyzed by incorporating the diffusion control term in the rate equation for the epoxy/DDS/AB blends. The fracture toughness was improved to about 350% compared to that of the unmodified resin at 30% of AB block copolymer. This is attributed to the formation of co-continuous morphology between the epoxy phase and AB block copolymer phase. By increasing the amount of AB, the modulus of the cured blends decreased, which was due to the presence of CTBN rubbery phases.     

Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

Combined salience based person re-identification

Human eye perceives an object as the entity with global information and local information. Human salience is distinctive local information in matching pedestrians across disjoint camera views, and matching on overall foreground guarantees reliable and robust identification. In this paper, we propose a strategy for the matching of mean salience to identify pedestrians. Also, we consider that person re-identification based on the local single directional matching suffers from the variations of pose, illumination and overlapping, and propose a global bi-directional matching to solve the challenging problems of person re-identification. Furthermore, our matching of mean salience is tightly combined with the global bi-directional matching. Patch matching is utilized to handle the misalignment problem in pedestrian images. We test our feature and matching approaches in person re-identification scenario. Experimental results demonstrate that the mean salience and the global bi-directional matching have promising discriminative capability in comparison with other ones.     

Random Accessible Mesh Compression Using Mesh Chartification

Previous mesh compression techniques provide decent properties such as high compression ratio, progressive decoding, and out-of-core processing. However, only a few of them supports the random accessibility in decoding, which enables the details of any specific part to be available without decoding other parts. This paper proposes an effective framework for the random accessibility of mesh compression. The key component of the framework is a wire-net mesh constructed from a chartification of the given mesh. Charts are compressed separately for random access to mesh parts and a wire-net mesh provides an indexing and stitching structure for the compressed charts. Experimental results show that random accessibility can be achieved with competent compression ratio, which is only a little worse than single-rate and comparable to progressive encoding. To demonstrate the merits of the framework, we apply it to process huge meshes in an out-of-core manner, such as out-of-core rendering and out-of-core editing.     

Highly Exposed ?NH2 Edge on Fragmented g-C3N4 Framework with Integrated Molybdenum Atoms for Catalytic CO2 Cycloaddition: DFT and Techno-Economic Assessment

This study focuses on the applicability of single-atom Mo-doped graphitic carbon nitride (GCN) nanosheets which are specifically engineered with high surface area (exfoliated GCN),  NH₂ rich edges, and maximum utilization of isolated atomic Mo for propylene carbonate (PC) production through CO₂ cycloaddition of propylene oxide (PO). Various operational parameters are optimized, for example, temperature (130 °C), pressure (20 bar), catalyst (Mo₂GCN), and catalyst mass (0.1 g). Under optimal conditions, 2% Mo-doped GCN (Mo₂GCN) has the highest catalytic performance, especially the turnover frequency (TOF) obtained, 36.4 h⁻¹ is higher than most reported studies. DFT simulations prove the catalytic performance of Mo₂GCN significantly decreases the activation energy barrier for PO ring-opening from 50–60 to 4.903 kcal mol⁻¹. Coexistence of Lewis acid/base group improves the CO₂ cycloaddition performance by the formation of coordination bond between electron-deficient Mo atom with O atom of PO, while  NH₂ surface group disrupts the stability of CO₂ bond by donating electrons into its low-level empty orbital. Steady-state process simulation of the industrial-scale consumes 4.4 ton h⁻¹ of CO₂ with PC production of 10.2 ton h⁻¹. Techno-economic assessment profit from Mo₂GCN is estimated to be 60.39 million USD year⁻¹ at a catalyst loss rate of 0.01 wt% h⁻¹.