ZrO<Subscript>2</Subscript> thin films on Si substrate

In the advancement of metal–oxide–semiconductor technology, Si-based semiconductor, with SiO₂ as outstanding dielectric, has been dominating microelectronic industry for decades. However, the drastic down-scaling in ultra-large-scale integrated circuitry has made ultrathin SiO₂ (~1.2 nm) unacceptable for many practical reasons. Introduction of ZrO₂ as high-κ dielectrics replacing SiO₂ is undeniably a potential yet formidable solution for the aforementioned problem. The objective of this review is to present the current knowledge of ZrO₂ thin film as gate dielectric on Si, in terms of its material and electrical properties produced by various deposition techniques. One of the techniques being focused is thermal oxidation of sputtered Zr and the mechanisms of transforming the metal into oxide has been extensively reviewed.     

Deposition and post-deposition annealing of thin Y2O3 film on n-type Si in argon ambient

Thin (∼5.0 nm) Y₂O₃ films were deposited on n-type Si (1 0 0) substrate using RF magnetron sputtering. Detailed studies on the effects of post-deposition annealing (PDA) temperatures (400, 600, 800, and 1000 °C) in argon ambient on these films were performed by X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), field emission scanning electron microscopy, and atomic force microscopy. Interfacial layer (IL) of SiO₂ in between Y₂O₃ and the Si substrate for sample annealed from 400 to 800 °C had been suggested from the results of FTIR. As for sample annealed at 1000 °C, presence of IL might consist of both Y₂Si₂O₇ and/or SiO₂ through the detection of Y₂Si₂O₇ compound and Si–O chemical bonding from XRD and FTIR analysis, respectively. For as-deposited sample, no detectable chemical functional group at the IL was recorded. Electrical characteristics of the Y₂O₃ films were acquired by fabricating metal-oxide–semiconductor capacitor as test structure. An improvement in the breakdown voltage (V_B) and leakage current density (J) was perceived as the PDA temperature increased. Of the PDA samples, the attainment of the lowest effective oxide charge, interface trap density, total interface trap density, and the highest barrier height at 1000 °C had contributed to the acquisition of the highest V_B and lowest J.     

Component commonality in assembled-to-stock systems

This paper quantifies the impact of component sharing in a two-echelon assembled-to-stock system consisting of several common components and end-products. Whereas there is a benefit from risk pooling when component sharing is allowed, there is also a component-mismatch problem due to the demand uncertainty for end-products. We study these conflicting effects by comparing a particular component sharing policy, namely the equal-fractile allocation policy, with a make-to-stock system which does not allow the allocation of common components. The probabilistic analysis shows that when each type of component is shared by at least two end-products, the equal-fractile allocation policy will always help to reduce the safety stock required to be held at a sufficiently high service level. We also look at a special scenario of the equal-fractile allocation policy which takes into account inventory cost considerations. We show that this problem can be formulated as a newsvendor problem.     

Hydrophilic modification of neural microelectrode arrays based on multi-walled carbon nanotubes

To decrease the impedance of microelectrode arrays, for neuroscience applications we have fabricated and tested MEA based on multi-walled carbon nanotubes. With decreasing physical size of a microelectrode, its impedance increases and charge-transfer capability decreases. To decrease the impedance, the effective surface area of the electrode must generally be increased. We explored the effect of plasma treatment on the surface wettability of MWCNT. With a steam-plasma treatment the surface of MWCNT becomes converted from superhydrophobic to superhydrophilic; this hydrophilic property is attributed to?-OH bonding on the surface of MWCNT. We reported the synthesis at 400?°C of MWCNT on nickel-titanium multilayered metal catalysts by thermal chemical vapor deposition. Applying plasma with a power less than 25?W for 10?s improved the electrochemical and biological properties, and circumvented the limitation of the surface reverting to a hydrophobic condition; a hydrophilic state is maintained for at least one month. The MEA was used to record neural signals of a lateral giant cell from an American crayfish. The response amplitude of the action potential was about 275?μV with 1?ms period; the recorded data had a ratio of signal to noise up to 40.12?dB. The improved performance of the electrode makes feasible the separation of neural signals and the recognition of their distinct shapes. With further development the rapid treatment will be useful for long-term recording applications.     

Development and application of an integrated framework for small UAV flight control development

This paper presents an integrated framework for small Unmanned Aerial Vehicle (UAV) flight control development. The approach provides a systematic procedure for flight control design process with a set of design tools that enables control engineers to rapidly synthesize, analyze and validate a candidate controller design. A model-based environment integrated with control synthesis, off-line and real-time simulation is developed for flight control synthesis, analysis and testings. The effectiveness of the proposed integrated framework is demonstrated by applying the framework approach to a small UAV testbed. Software-in-the-loop, processor-in-the-loop and flight testings are conducted with the synthesized controller implemented. Closed-loop performance and robustness results obtained are presented.     

Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete

In this study, the effects of a new type of non-metallic fiber (polypropylene twisted bundle (PPTB)) on the slump and mechanical properties of oil palm shell (OPS) concrete have been investigated. The results showed that increasing the volume fraction of PPTB fibers, it slightly decreases the workability and density of the concrete. It has found that the compressive strength of OPS concrete increases with increasing PPTB fiber volume fraction. The results revealed that the reinforcement of OPS concrete with steel and PPTB fibers reduces the strength loss of OPS concrete in poor curing environments. In addition, the fiber with low volume fraction (up to 0.25 %) is more efficient in improving the flexural strength of OPS concrete compared to its splitting tensile strength. The average modulus of elasticity (E value) is obtained to be 17.4 GPa for all mixes, which is higher than the values reported in previous studies and is within the range for normal weight concrete. The performance of the PPTB fibers is comparable to that for steel fibers at a volume fraction (V_f) of 0.5 %, which provides less dead load for lightweight concrete. The findings of this study showed that the PPTB fibers can be used as an alternative material to enhance the properties of OPS concrete. Hence, PPTB fibers are a promising alternative for lightweight concrete applications.     

Investigation of ultralow leakage in MOS capacitors on 4H SiC

Ultralow leakage current through nitrided gate oxides on 4H SiC is investigated by a novel technique in this paper. The technique utilizes capacitance-voltage (C-V) measurements to characterize the relaxation of nonequilibrium capacitance due to charge leakage in floating-gate metal-oxide-semiconductor capacitors. The C-V measurements are performed at elevated temperatures and the results are extrapolated to room temperature. The obtained values for the relaxation times are in the order of 10/sup 13/ s for MOS capacitors on both n-type and p-type 4H SiC.     

Interconnection Networks Using Shuffles

Networking techniques allow several processors within a multiprocessing system to cooperate efficiently on a single large problem.     

Seismic performance of moment resisting steel frame subjected to earthquake excitations

This study presents static and dynamic assessments on the steel structures. Pushover analysis (POA) and incremental dynamic analysis (IDA) were run on moment resisting steel frames. The IDA study involves successive scaling and application of each accelerogram followed by assessment of the maximum response. Steel frames are subjected to nonlinear inelastic time history analysis for 14 different scaled ground motions, 7 near field and 7 far field. The results obtained from POA on the 3, 6 and 9 storey steel frames show consistent results for both uniform and triangular lateral loading. Uniform loading shows that the steel frames exhibits higher base shear than the triangular loading. The IDA results show that the far field ground motions has caused all steel frame design within the research to collapse while near field ground motion only caused some steel frames to collapse. The POA can be used to estimate the performance-based-seismic-design (PBSD) limit states of the steel frames with consistency while the IDA seems to be quite inconsistent. It is concluded that the POA can be consistently used to estimate the limit states of steel frames while limit state estimations from IDA requires carefully selected ground motions with considerations of important parameters.