Double-pass resonant Er-Raman amplifier

A new double-pass wideband Er-Raman fibre amplifier is proposed, pumped by a Raman laser oscillating through a medium consisting of Er-doped fibre and dispersion compensating fibre in series.     

470-MHz–698-MHz IEEE 802.15.4m Compliant RF CMOS Transceiver

This paper proposes an IEEE 802.15.4m compliant TV white-space orthogonal frequency-division multiplexing (TVWS)-(OFDM) radio frequency (RF) transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS-OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty-cycle local oscillator generator, and a delta-sigma fractional-N phase-locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high-Q filtering RF receiver is tolerable to in-band interferers as strong as −20 dBm at a 3-MHz offset. The proposed TVWS-OFDM RF transceiver is fabricated using a 0.13-μm CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error-vector-magnitude of < 3%, and a sensitivity level of −103 dBm with a packet-error-rate of < 3%. Using the implemented TVWS-OFDM modules, a public demonstration of electricity metering was successfully carried out.     

Subjective Listening Experiments on a Front and Rear Array‐Based WFS System

Wave field synthesis (WFS) has been gathering more and more attention recently due to its ability to perfectly reproduce an original sound field. However, to realize theoretically perfect WFS, a four‐sided loudspeaker array that encloses the listener is required. However, it is difficult to build such a system except in large listening spaces, such as a theater or concert hall. In other words, if the listening space is a home, installing a side loudspeaker array is impractical. If the two side walls located to the left and right of the listener can be omitted, a setup using only front and rear loudspeaker arrays may be a solution. In this letter, we present a subjective listening experiment of sound localization/distance based on a WFS using a front and rear loudspeaker array system which is conducted on two listening points and shows average localization errors of 6.1° and 9.18°, while the average distance errors are –27% (0.5 m) and –29% (0.6 m), respectively.     

A 1.8-V 128-Mb mobile DRAM with double boosting pump, hybrid current sense amplifier, and dual-referenced adjustment scheme for temperature sensor

To verify three important circuit schemes suitable for DRAMs in mobile applications, a 1.8-V 128-Mb SDRAM was implemented with a 0.15-/spl mu/m technology. To achieve an ideal 33% efficiency, the double boosting pump uses two capacitor's series connection at pumping phase, while they are precharged in parallel. The hybrid folded current sense amplifier together with a novel replica inverter connection improved power and speed performances. Also, a dual-referenced adjustment scheme for a temperature sensor was proposed to allow a very high accuracy in tuning. Without loss in productivity, the implemented dual-referenced searching technique achieved tuning error of less than /spl plusmn/2.5/spl deg/C.     

Optimal Transmission Power for Single- and Multi-Hop Links in Wireless Packet Networks With ARQ Capability

In this paper, we rigorously investigate the energy minimization problem for wireless packet networks with automatic repeat request (ARQ) capability. We first formulate the problem for the single-hop case under constrained packet delay and reliability and derive the necessary and sufficient condition for the optimal transmission power at each ARQ stage. We formulate a global rule of optimal transmission power control that achieves optimality regardless of the delay and reliability constraints. Then we extend it to encompass the multi-hop case by dividing the overall problem into two subproblems-energy determination for each ARQ stage and energy distribution among the constituent nodes. We show that the optimality condition established for the single-hop case is also applicable to solve the energy determination problem in the multi-hop case, rendering an optimal solution to the energy distribution problem. Numerical examples reveal that a significant amount of energy is saved by adopting the optimal transmission power and the performance gain is strongly correlated with the decreasing property of the frame error rate     

Highly Customizable All Solution–Processed Polymer Light Emitting Diodes with Inkjet Printed Ag and Transfer Printed Conductive Polymer Electrodes

Inkjet and transfer printing processes are combined to easily form patterned poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as top anodes of all solution–processed inverted polymer light emitting diodes (PLEDs) on rigid glass and flexible plastic substrates. An adhesive PEDOT:PSS ink is formulated and fully customizable patterns are obtained using the inkjet printing process. In order to transfer the patterned PEDOT:PSS films, adhesion properties at interfaces during multistep transfer printing processes are carefully adjusted. The transferred PEDOT:PSS film on the plastic substrates shows not only a sheet resistance of 260.6 Ω/□ and a transmittance of 92.1% at 550 nm wavelength but also excellent mechanical flexibility. The PLEDs with spin‐coated functional layers sandwiched between the transferred PEDOT:PSS top anodes and inkjet‐printed Ag bottom cathodes are fabricated. The fabricated PLEDs on the plastic substrates show a high current efficiency of 10.4 cd A^?1 and high mechanical stability. It is noted that because both Ag and PEDOT:PSS electrodes can be patterned with a high degree of freedom via the inkjet printing process, highly customizable PLEDs with various pattern sizes and shapes are demonstrated on the glass and plastic substrates. Finally, with all solution process, a 5 × 7 passive matrix PLED array is demonstrated.     

Equalization digital on-channel repeater in the single frequency networks

Digital On-Channel Repeater (DOCR) can be used for Single Frequency Networks (SFN's). It is much simple and low cost compared to Distributed Transmitter which needs Studio to Transmitter Link (STL). However, traditional DOCR has one of those defects such as a power limit, a long time system processing delay or a poor output signal quality. In order to overcome all of those defects, we introduce Equalization DOCR (EDOCR) which regenerates the original 8-VSB output signal with relatively short time system processing delay. Lab. and Field test results show that the EDOCR can eliminate the loop-back signal up to 5.5 dB with 5.5 /spl mu/s system processing delay. By using EDOCR, we can save spectrum resources and extend coverage areas.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.     

Development and Simulation of Sulfur‐doped Graphene Supported Platinum with Exemplary Stability and Activity Towards Oxygen Reduction

Sulfur‐doped graphene (SG) is prepared by a thermal shock/quench anneal process and investigated as a unique Pt nanoparticle support (Pt/SG) for the oxygen reduction reaction (ORR). Particularly, SG is found to induce highly favorable catalyst‐support interactions, resulting in excellent half‐cell based ORR activity of 139 mA mg_Pt ^?1 at 0.9 V vs RHE, significant improvements over commercial Pt/C (121 mA mg_Pt ^?1) and Pt‐graphene (Pt/G, 101 mA mg_Pt ^?1). Pt/SG also demonstrates unprecedented stability, maintaining 87% of its electrochemically active surface area following accelerated degradation testing. Furthermore, a majority of ORR activity is maintained, providing 108 mA mg_Pt ^?1, a remarkable 171% improvement over Pt/C (39.8 mA mg_Pt ^?1) and an 89% improvement over Pt/G (57.0 mA mg_Pt ^?1). Computational simulations highlight that the interactions between Pt and graphene are enhanced significantly by sulfur doping, leading to a tethering effect that can explain the outstanding electrochemical stability. Furthermore, sulfur dopants result in a downshift of the platinum d‐band center, explaining the excellent ORR activity and rendering SG as a new and highly promising class of catalyst supports for electrochemical energy technologies such as fuel cells.