Radon measurements in the caves of Zonguldak (Turkey)

There are approximately 20 caves of limestone origin in Zonguldak (Turkey). In this study, the results of atmospheric radon measurements performed for two caves are presented. These caves, G?kg?l and Cehennema?zi, are open to tourism. G?kg?l Cave is the longer, at nearly 3,200 m in length. Cehenennema?zi is a pit-type cave with a total length of 85 m. The radon measurements were performed for 2 months between July 2004 and September 2004 using passive polycarbonate detectors. The mean radon concentrations were recorded as 1,918.8 Bq m(-3) in G?kg?l Cave and 657 Bq m(-3) in Cehennema?zi Cave. The maximum value corresponds to a site located 400 m from the entrance of G?kg?l Cave. Mean effective dose values for tourists of 0.86 microSv per visit to Cehennema?zi Cave and 3.76 microSv to G?kg?l Cave were obtained. These results show that protection against radiological hazards would not be necessary for visitors to these two caves.     

食糖市场营销战略分析

2005/06年制糖期全国食糖产量881.5万t,消费量估计达到1070万t,主产区白糖平均售价达到4500元/t,制糖企业取得很好效益.新形势下制糖行业将发生转变,一是食糖流通企业经过整合力量不断壮大,二是市场化、国际化程度逐步提高,三是食糖价格将总体走高,四是甜菜糖和淀粉糖将加速发展.在新形势下制糖企业必须努力提高市场竞争力,制定市场营销战略,重视销售网络渠道建设,不断扩大市场份额.     

PolyHIPE composite based-form stable phase change material for thermal energy storage

A novel shape-stabilized n-hexadecane/polyHIPE composite phase change material (PCM) was designed and thermal energy storage properties were determined. Porous carbon-based frameworks were produced by polymerization of styrene-based high internal phase emulsions (HIPEs) in existence of the surface modified montmorillonite nanoclay. The morphological and mechanical properties of the obtained polyHIPEs were investigated by scanning electron microscopy analysis and the compression test, respectively. The polyHIPE composite with the best pore morphology and the highest compression modulus was determined as a framework to prepare the form stable n-hexadecane/polyHIPE composite phase change material using the one-step impregnation method. The chemical structure and morphologic property of composite PCM was investigated by FT-IR and polarized optical microscopy analysis. Thermal stability of the form-stable PCM (FSPCM) was examined by TG analysis. The n-hexadecane fraction engaged into the carbon foam skeleton was found of as 55 wt% from TG curve. differential scanning calorimetry analysis was used for determining melting temperature and latent heat storage capacity of FSPCM and these values were determined as (26.36°C) and (143.41 J/g), respectively. The results indicated that the obtained composite material (FSPCM) has a considerable potential for low temperature (18°C-30°C) thermal energy storage applications with its thermal energy storage capacity, appropriate phase change temperatures and high thermal stability.     

Dark fermentative hydrogen production from sucrose and molasses

There are many factors affecting the dark fermentative hydrogen production. The interaction of these factors, that is, their combined effects, should be investigated for better design of the systems with stable and higher hydrogen yields. This study aimed to investigate the combined effects of initial substrate, pH, and biomass (or initial substrate to biomass) values on hydrogen production from sucrose and sugar‐beet molasses. Therefore, optimum initial chemical oxygen demand (COD), pH, and volatile suspended solids (VSS) or initial substrate to biomass (VSS) ratio (S/X_o) values leading to the highest dark fermentative hydrogen production were investigated in batch reactors. An experimental design approach (response surface methodology) was used. Results revealed that when sucrose was the substrate, maximum hydrogen production yield (HY) of 2.3 mol H₂/mol sucrose_added was obtained at initial pH of 7 and COD of 10 g/L. Initial S/X_o values studied (4–20 g COD/g VSS) had no effect on HY, while the initial pH was found as the parameter mostly affecting both HY and hydrogen production rate (HPR). When substrate was molasses, initial COD concentration was the only variable affecting HY and HPR. Maximum of both was achieved at 10 g/L initial COD. Initial VSS values studied (2.5–7.5 g/L) had no effect on HPR and HY. This study also indicated that molasses leads to homoacetogenesis for potentially containing intrinsic microorganism and/or natural constituents; thus, sucrose is more advantageous for hydrogen production via fermentation. Homoacetogenesis should be prevented for effective optimization via response surface methodology, if substrate is a natural carbon source potential to have intrinsic microorganisms. Copyright © 2017 John Wiley & Sons, Ltd.     

MHD flow in a rectangular duct with a perturbed boundary

The unsteady magnetohydrodynamic (MHD) flow of a viscous, incompressible and electrically conducting fluid in a rectangular duct with a perturbed boundary, is investigated. A small boundary perturbation $\epsilon$ is applied on the upper wall of the duct which is encountered in the visualization of the blood flow in constricted arteries. The MHD equations which are coupled in the velocity and the induced magnetic field are solved with no-slip velocity conditions and by taking the side walls as insulated and the Hartmann walls as perfectly conducting. Both the domain boundary element method (DBEM) and the dual reciprocity boundary element method (DRBEM) are used in spatial discretization with a backward finite difference scheme for the time integration. These MHD equations are decoupled first into two transient convection–diffusion equations, and then into two modified Helmholtz equations by using suitable transformations. Then, the DBEM or DRBEM is used to transform these equations into equivalent integral equations by employing the fundamental solution of either steady-state convection–diffusion or modified Helmholtz equations. The DBEM and DRBEM results are presented and compared by equi-velocity and current lines at steady-state for several values of Hartmann number and the boundary perturbation parameter.     

Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

Research, protection and restoration studies on the historical fabric of Isparta, using Aya Baniya Church as an example

Turkey is a country that bears the tracks of many civilizations because of its geographic location and its characteristics that come from its deeply rooted history. So it contains historical and cultural items of value that are quite rich and can be characterized as intensely universal. Thanks to these valuable items, it has always drawn the attention of the world. Isparta is a city that houses quite a few historical, archaeological and cultural items of value in its structure. Protecting the historical buildings that carry the cultural and historical traces of a period and making a contribution to its reuse for the future of all humanity are a truth of international importance. In this connection, with this study, essential work was carried out and certain suggestions made about St. Baniya Church, which is one of the most important structures of the historically, archaeologically and culturally valuable items that make up the historical fabric of Isparta and especially, the historical and cultural potential of Isparta.     

Improving Interoperability by Incorporating UnitsML Into Markup Languages

Maintaining the integrity of analytical data over time is a challenge. Years ago, data were recorded on paper that was pasted directly into a laboratory notebook. The digital age has made maintaining the integrity of data harder. Nowadays, digitized analytical data are often separated from information about how the sample was collected and prepared for analysis and how the data were acquired. The data are stored on digital media, while the related information about the data may be written in a paper notebook or stored separately in other digital files. Sometimes the connection between this “scientific meta-data” and the analytical data is lost, rendering the spectrum or chromatogram useless. We have been working with ASTM Subcommittee E13.15 on Analytical Data to create the Analytical Information Markup Language or AnIML—a new way to interchange and store spectroscopy and chromatography data based on XML (Extensible Markup Language). XML is a language for describing what data are by enclosing them in computer-useable tags. Recording the units associated with the analytical data and metadata is an essential issue for any data representation scheme that must be addressed by all domain-specific markup languages. As scientific markup languages proliferate, it is very desirable to have a single scheme for handling units to facilitate moving information between different data domains.At NIST, we have been developing a general markup language just for units that we call UnitsML. This presentation will describe how UnitsML is used and how it is being incorporated into AnIML.     

A study of indoor radon levels in rural dwellings of Ezine (Canakkale, Turkey) using solid-state nuclear track detectors

Indoor radon activity level and radon effective dose (ED) rate have been carried out in the rural dwellings of Ezine (Canakkale) during the summer season using Radosys-2000, a complete set suitable to radon concentration measurements with CR-39 plastic alpha track detectors. The range of radon concentration varied between 9 and 300 Bq m(-3), with an average of 67.9 (39.9 SD) Bq m(-3). Assuming an indoor occupancy factor of 0.8 and 0.4 for the equilibrium factor of radon indoors, it has been found that the 222Rn ED rate in the dwellings studied ranges from 0.4 to 5.2 mSv y(-1), with an average value of 1.7 (1.0) mSv y(-1). There is a possibility that low radon concentrations exist indoors during the summer season in the study area because of relatively high ventilation rates in the dwellings. A winter survey will be needed for future estimation of the annual ED.     

探测爆炸物和放射性材料的核技术方法

叙述了采用核技术方法探查隐藏爆炸物和放射性材料的优越性及其特点,重点介绍了8类主动式中子质询技术,对它们探查爆炸物的适用范围进行了剖析,对采用伽玛法的非中子质询技术作了一般性讨论.概括了各类已商用化工业中子源和伽玛射线探测器,论述了它们应用于安检系统的长处和不足.分析了两类典型的隐藏爆炸物安检问题,指出一个理想的爆炸物探查系统应具备的11项特性.介绍了国际上最受重视的伴随粒子成像和脉冲快中子系统的研制进展.简要描述了有别于主动式探查爆炸物的被动式放射性材料探查方法.指出隐藏爆炸物品和放射性物质的检查没有一种方法是万能的,不同场合不同目标需要用不同的技术或联合使用几种技术.