Extrusion-Grafting Starch Onto Vinylic Polymers

The review outlines the rationale behind starch polymer based thermoplastic resin production using reactive extrusion processing techniques, as well as characterization of these polymers.     

Viscoelastic and thermal properties of natural rubber low-density polyethylene composites with boric acid and borax

The influence of boric acid (BA) and borax (BO) neutron-absorbing fillers on thermal stability and viscoelastic behavior of natural rubber (NR) low-density polyethylene composites has been studied. The thermal degradation and dynamic mechanical properties of the composites have been analyzed as a function of temperature. The results revealed the enhancement of thermal stability of the composites by the addition of BA and BO fillers. The flame resistance of the material was improved by the addition of both the fillers. The storage modulus was found to be dependent upon the temperature and nature of the filler. The amount of NR chains immobilized by filler particles has been quantified from dynamic mechanical analysis and secondary filler/filler interactions have been verified by the Payne effect analysis. Finally, the experimental results have been compared with theoretical predictions.     

Transport and solvent sensing characteristics of styrene butadiene rubber nanocomposites containing imidazolium ionic liquid modified carbon nanotubes

Obtaining strong interfacial interaction between filler and polymer matrix is very crucial for the fabrication of polymer nanocomposites with superior performance. Present study is aimed to fabricate high performance styrene butadiene rubber (SBR) nanocomposites with imidazolium type ionic liquid modified multiwalled carbon nanotube (MWCNT). Ionic liquid facilitates the dispersion of MWCNT in rubber matrix and it is obvious from transmission electron microscopy images. Diffusion of toluene through SBR nanocomposite membranes has been investigated as a function of surface modified MWCNT (f-MWCNT) content to analyze the chain dynamics and filler-polymer interactions. O₂ gas barrier effect of nanocomposites with special reference to the filler loading is explored. The substantial improvement in the barrier effect in presence of filler interpreted on the grounds of a theoretical model describing permeability of heterogeneous systems. Finally solvent sensing characteristics of prepared nanocomposites are also analyzed and it is observed that prepared nanocomposites can be used as a flexible solvent sensor.     

Chitosan/clay nanocomposite film preparation and characterization

Nanocomposites of chitosan and nanoclays (MMT‐Na⁺ and Cloisite 30B) were prepared by solvent casting. The structural properties, thermal behaviors, and mechanical properties were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy, differential scanning calorimetry, thermogravimetry analyses, and an Instron universal testing machine. XRD and TEM results indicated that an exfoliated structure was formed with addition of small amounts of MMT‐Na⁺ to the chitosan matrix. Intercalation along with some exfoliation occurred with up to 5 wt % MMT‐Na⁺. Micro‐scale composite (tactoids) formed when Cloisite 30B was added to the chitosan matrix. Surface roughness increased with addition of a small amount of clay. Tensile strength of a chitosan film was enhanced and elongation‐at‐break decreased with addition of clay into the chitosan matrix. Melt behavior and thermal stability did not change significantly with addition of clays. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1684–1691, 2006     

Säurekatalysierte Umsetzungen von Aromaten mit Alkanen und Cycloalkanen. IX. Alkylierungen mit 2,2,4-Trimethylpentan (Isooctan)

Acid-catalyzed Reactions of Aromatic Hydrocarbons with Alkanes and Cycloalkanes. IX. Alkylations with 2,2,4-Trimethylpentane (Isooctane) The non-conventional alkylation of benzene, toluene, ethyl- and isopropylbenzene, fluoro- and chlorobenzene with 2,2,4-trimethylpentane in the presence of acid catalysts is described. The composition of the rather complex reaction mixtures is determined by gas-liquid chromatography and mass spectrometry, tert. butylarenes being the main products beside alkylsubstituted indanes and tetralines. Their formation is interpreted as a competition between fragmentation and isomerization of the alkylating agent. By use of trifluoromethanesulfonic acid or combinations of catalysts from HF or HSO₃F with variant metallic fluorides at lower temperatures the selectivity of the reaction may be partially raised.     

Plasma‐Induced Amorphous Shell and Deep Cation‐Site S Doping Endow TiO2 with Extraordinary Sodium Storage Performance

Structural design and modification are effective approaches to regulate the physicochemical properties of TiO₂, which play an important role in achieving advanced materials. Herein, a plasma‐assisted method is reported to synthesize a surface‐defect‐rich and deep‐cation‐site‐rich S doped rutile TiO₂ (R‐TiO_2–x‐S) as an advanced anode for the Na ion battery. An amorphous shell (≈3 nm) is induced by the Ar/H₂ plasma, which brings about the subsequent high S doping concentration (≈4.68 at%) and deep doping depth. Experimental results and density functional theory calculations demonstrate greatly facilitated ion diffusion, improved electronic conductivity, and an increased mobility rate of holes for R‐TiO_2?x‐S, which result in superior rate capability (264.8 and 128.5 mAh g^?1 at 50 and 10 000 mA g^?1, respectively) and excellent cycling stability (almost 100% retention over 6500 cycles). Such improvements signify that plasma treatment offers an innovative and general approach toward designing advanced battery materials.     

Structural,electrical and magnetic properties of perovskite La0.4Sr0.6MnO3 prepared by mechanochemical synthesis technique

Journal of Materials Science: Materials in Electronics - Lanthanum strontium manganite (La0.4Sr0.6MnO3) of perovskite structure was successfully produced by mechanochemical synthesis method....     

Lipid Metabolism and Cardiovascular Morbidity and Mortality in Hemodialysis Patients: Role of Factors Modulating Cytosolic Calcium

Animal studies indicate that insulin resistance and glucose intolerance leading to dyslipidemia in uremic rats are associated with increased cytosolic calcium ([Ca⁺⁺ i]). The resistance and intolerance are reversed with verapamil, but recur after its discontinuation. This finding suggests that hyperparathyroid‐induced [Ca ⁺⁺ i] increase is responsible for the metabolic derangement. We retrospectively examined, over a 12‐year period, the effects of factors that lower [Ca ⁺⁺i] on total serum cholesterol and triglycerides in 332 hemodialysis (HD) patients. Because the study was retrospective, detailed lipid profiles were not available. We therefore relied on morbidity and mortality outcomes related to atherosclerotic vascular disease. Patients with diabetes mellitus were excluded, because their dyslipidemia and vascular disease are mediated via a different mechanism. Four groups emerged: group I [high parathormone (PTH) in the absence of calcium channel blockers (CCBs), n = 107], representing the highest [Ca⁺⁺ i]; group II (high PTH in the presence of CCBs, n = 76) and group III (lower PTH in the absence of CCBs, n = 66), representing intermediate [Ca ⁺⁺ i]; and group IV (lower PTH in the presence of CCBs, n = 83) representing the lowest [Ca ⁺⁺i]. The theoretically lower [Ca ⁺⁺ i] was achieved via CCB therapy or lower PTH, or both. The mean serum cholesterol in group I was 322 ± 24 mg/dL and the level of triglycerides was 398 ± 34 mg/dL. Group II had mean serum cholesterol of 196 ± 16 mg/dL and triglycerides of 157 ± 17 mg/dL. Group III had a mean serum cholesterol of 202 ± 19 mg/dL and triglycerides of 160 ± 15 mg/dL. Group IV had a mean serum cholesterol of 183 ± 9 mg/dL and triglycerides of 94 ± 6 mg/dL. The differences in cholesterol and triglyceride levels among four groups were significant (p < 0.001) by one‐way analysis of variance (ANOVA). The incidence of cardiovascular morbidity and mortality events was 61% in group I, 24% in group II, 28% in group III, and 18% in group IV (χ ² = 47.7, p < 0.001). We conclude that, in non diabetic HD patients, hyperparathyroidism, especially in the absence of CCBs, is associated with severe dyslipidemia and increased risk of cardiovascular morbidity and mortality. Dyslipidemia may be related to a hyperparathyroid‐induced increase in cytosolic calcium [Ca⁺⁺i]. Lowering [Ca⁺⁺i] by decreasing PTH or by blocking calcium entry into cells (via CCBs), or both, is associated with less dyslipidemia and improved long‐term cardiovascular morbidity and mortality. Prospective randomized studies, with actual measurement of [Ca ⁺⁺i], are needed to verify the results of this study.