Optimization of metallurgical variables in fracture prevention

The effect of metallurgical variables on the two most important crack growth mechanisms - stable crack growth by environmentally assisted cyclic crack growth and unstable crack growth by cleavage - in light water reactor pressure vessel steels is evaluated. The analyses are based on micromechanisms of fracture and sensitivity analysis, when applicable. Metallurgical variables considered are non-metallic inclusions and carbides as well as other parameters through their effects on yield strength and other mechanical properties.     

Energy harvesting with a cymbal type piezoelectric transducer from low frequency compression

In this paper a piezoelectric energy harvester based on a Cymbal type structure is presented. A piezoelectric disc ?35?mm was confined between two convex steel discs ?35?mm acting as a force amplifier delivering stress to the PZT and protecting the harvester. Optimization was performed and generated voltage and power of the harvester were measured as functions of resistive load and applied force. At 1.19?Hz compression frequency with 24.8?N force a Cymbal type harvester with 250?μm thick steel discs delivered an average power of 0.66?mW. Maximum power densities of 1.37?mW/cm³ and 0.31?mW/cm³ were measured for the piezo element and the whole component, respectively. The measured power levels reported in this article are able to satisfy the demands of some monitoring electronics or extend the battery life of a portable device.     

PCR assay for differentiating between Group I (proteolytic) and Group II (nonproteolytic) strains of Clostridium botulinum

Groups I (proteolytic) and II (nonproteolytic) C. botulinum are genetically and physiologically distinct groups of organisms, with both groups being involved with human botulism. Due to differences in spore heat resistance and growth characteristics, the two groups possess different types of human health risks through foods, drink, and the environment. The epidemiology of human botulism due to Groups I and II C. botulinum is poorly understood, largely due to insufficient characterization of disease isolates, and warrants thorough outbreak investigation with a particular attention to discrimination between the different physiological groups of C. botulinum. In this study, a PCR assay was developed to discriminate between Group I and Group II C. botulinum. The assay is based on the fldB associated with phenylalanine metabolism in proteolytic clostridia, and employs an internal amplification control targeted to conservative regions of 16S rrn in Groups I and II C. botulinum. The assay correctly identified all 36 Group I and 24 Group II C. botulinum strains, possessing a 100% exclusivity and inclusivity. The assay provides a substantial improvement in discriminating between the Groups I and II C. botulinum, which traditionally is based on a time-consuming and error-prone culture method. Differentiation between the physiological groups of C. botulinum is an essential step in investigation of human botulism outbreaks, and should be considered as a diagnostic corner-stone in order to improve our epidemiological understanding of human botulism.     

Elliptical slot based polarization insensitive compact and flexible chipless RFID tag

A miniaturized, polarization insensitive, and fully passive chipless radio frequency identification tag is proposed in this research article. The realized tag is based on slotted elliptical structures in a nested loop fashion with identical lengths and widths of slot resonators. Alteration of data sequence is accomplished by addition and elimination of nested resonators in the geometric structure. The tag is capable to encode 10 bits of data and covers spectral range from 3.6 to 15.6 GHz. The formulated structure demonstrates polarization insensitive characteristic. The data encoding structure is analyzed and optimized for different substrates that are, Rogers RT/duroid/5880, Rogers RT/duroid/5870, and Taconic TLX‐0 over the miniaturized footprint of 22.8 × 16 mm². The presented tag is robust, novel, compact, and flexible exhibiting a stable response to impinging electromagnetic waves at various angles of incidence.     

Teachers' work-related non-literature-known building-related symptoms are also connected to indoor toxicity: A cross-sectional study

A previous study showed that classical building-related symptoms (BRS) were related to indoor dust and microbial toxicity via boar sperm motility assay, a sensitive method for measuring mitochondrial toxicity. In this cross-sectional study, we analyzed whether teachers’ most common work-related non-literature-known BRS (nBRS) were also associated with dust or microbial toxicity. Teachers from 15 schools in Finland completed a questionnaire evaluating 20 nBRS including general, eye, respiratory, hearing, sleep, and mental symptoms. Boar sperm motility assay was used to measure the toxicity of extracts from wiped dust and microbial fallout samples collected from teachers’ classrooms. 231 teachers answered a questionnaire and their classroom toxicity data were recorded. A negative binomial mixed model showed that teachers’ work-related nBRS were 2.9-fold (95% CI: 1.2-7.3) higher in classrooms with highly toxic dust samples compared to classrooms with non-toxic dust samples (p = 0.024). The RR of work-related nBRS was 1.8 (95% CI: 1.1-2.9) for toxic microbial samples (p = 0.022). Teachers’ BRS appeared to be broader than reported in the literature, and the work-related nBRS were associated with toxic dusts and microbes in classrooms.     

A high capacity tunable retransmission type frequency coded chipless radio frequency identification system

This article presents a 12‐bit frequency coded chipless RFID system in the frequency range of 3 to 6 GHz. The system consists of a fully printable chipless tag and a pair of high‐gain reader antennas. The tag also incorporates its own antennas to improve the read range. Information is encoded into frequency spectrum using a multi‐resonant circuit. The circuit consists of multiple microstrip U and L‐shaped open stub resonators patterned in a unique configuration. The proposed configuration aids in capturing more data in a reduced space as well as tunable frequency operation. Tag and reader antennas utilize techniques such as stepped impedance feeding line, defective partial ground plane, and stair‐step patch structure to achieve wide‐band impedance bandwidth in miniature size. The results of the wireless measurements in the non‐anechoic environment show that the proposed system has a reading range of more than 20 cm. The presented system possesses great potential for low‐cost short‐range inventory tracking.     

Use of plant stanol ester margarine among persons with and without cardiovascular disease: Early phases of the adoption of a functional food in Finland

Background

The plant stanol ester margarine Benecol^® is a functional food that has been shown to lower effectively serum total and LDL-cholesterol. The purpose of this post-marketing study is to characterize users of plant stanol ester margarine with and without cardiovascular disease.

Methods

A cohort of plant stanol ester margarine users was established based on a compilation of 15 surveys conducted by the National Public Health Institute in Finland between 1996–2000. There were 29 772 subjects aged 35–84 years in the cohort. The users of plant stanol ester margarine were identified by the type of bread spread used.

Results

The plant stanol ester margarine was used as bread spread by 1332 (4.5%) subjects. Almost half (46%) of the users reported a history of cardiovascular disease. Persons with cardiovascular disease were more likely to use plant stanol ester margarine (8%) than persons without cardiovascular disease (3%). Users with and without cardiovascular disease seemed to share similar characteristics.In particular, they were elderly people with otherwise healthy life-styles and diet. They were less likely smokers, more likely physically active and less likely obese than nonusers. The users reported being in good or average health in general and having used cholesterol-lowering drugs.

Conclusion

Plant stanol ester margarine seems to be used by persons for whom it was designed and in a way it was meant: as part of efforts for cardiovascular disease risk reduction.