On mesh-free valley surface extraction with application to low frequency sound simulation

Crease surfaces describe extremal structures of 3D scalar fields. We present a new region-growing-based approach to the meshless extraction of adaptive nonmanifold valley and ridge surfaces that overcomes limitations of previous approaches by decoupling point seeding and triangulation of the surface. Our method is capable of extracting valley surface skeletons as connected minimum structures. As our algorithm is inherently mesh-free and curvature adaptive, it is suitable for surface construction in fields with an arbitrary neighborhood structure. As an application for insightful visualization with valley surfaces, we choose a low frequency acoustics simulation. We use our valley surface construction approach to visualize the resulting complex-valued scalar pressure field for arbitrary frequencies to identify regions of sound cancellation. This provides an expressive visualization of the topology of wave node and antinode structures in simulated acoustics.     

Solubility of helium in melts of the metallic glass system Pd-Ni-P and in related systems

Glass melts of the metallic alloy system Pd_10–70Ni_10–70P_14–26 were saturated with helium gas during the melt-spinning process. Some melts with platinum substituted for palladium; manganese, iron or cobalt for nickel; and boron for phosphorus could also be saturated. The helium could be extracted from the glasses and the amount of gas was quantitatively measured with a mass spectrometer. The helium solubilities, obtained between 750 and 1250° C, varied between about 2 and 45 (l He per mol glass) (T/273). These solubilities turned out to be strongly composition-dependent. This fact is discussed in terms of different short-range order structure units which are directly related to the free volume available for the gas solution process.     

Bitterstoffe beim Erhitzen von Saccharose, Maltose und Prolin 2. Mitteilung

Summary In addition to the mono- and dipyrrolidinohexosereductones described recently (Z Lebensm Unters Forsch (1984) 178:356) two further bittertasting compounds were isolated from heated mixtures of proline and sucrose (molar ratio 3: 1, 190 °C, 30 min) and also synthesized, namely 2,3-bis-(1-pyrrolidinyl)2-cyclopenten-l-one and 2,3-bis(1-pyrrolidinyl)-5methyliden-2-cyclopenten-l-one. The recognition thresholds (mmol/1) are 0.15–0.25 and 0.06–0.12 respectively. Both compounds have a burning bitter taste character. From a maltose-proline reaction mixture 2--glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-one was isolated. When the dihydroxypyranone VI was heated with proline, 2,5-dihydroxy-5-methyl-4-prohnyl-2-cyclopenten-1-one and the cyclopent(b)azepinones XI and XII were among the compounds formed. These compounds also have a bitter taste character.Zusammenfassung Zusätzlich zu den kürzlich beschriebenen Mono- and Dipyrrolidinohexosereduktionen (Z Lebensm Unters Forsch (1984) 178:356) wurden zwei weitere bittere Verbindungen aus erhitzten Mischungen von Prolin and Saccharose (Molverhältnis 3:1, 190 °C, 30 min) isoliert and synthetisiert. Es handelt sich um 2,3-Bis-(1-Pyrrolidinyl)-2-cyclopenten-1-on und 2,3-Bis-(1-Pyrrolidinyl)-5-methyliden-2-cyclopenten-1-on. Die Erkennungsschwellenwerte (mmol/1) sind 0,15-0,25 and 0,06-0,12. Beide Verbindungen haben einen brennend-bitteren Geschmack. Aus einem Maltose-Prolin-Umsetzungsgemisch gelang die Isolierung des 2--Glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-ons. Bei der Reaktion des Dihydropyranons VI mit Prolin wurden u. a. das 2,5-Dihydroxy-5-methyl-4-prolinyl2-cyclopenten-1-on sowie die Cyclopent(b)azepinone XI and XII gebildet. Diese Verbindungen sind ebenfalls mehr oder weniger stark bitter.     

Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

Polymer melt elongation—methods,results, and recent developments

For film blowing of polyethylene it has been shown previously that melt elongation is very powerful for polymer characterization. With two types of rheometers, simple (also called “uniaxial”) elongational tests as well as creep tests can be performed homogeneously. In simple elongation, the melts of branched polyethylene show a remarkable strain hardening. With respect to their advantages and disadvantages, these rheometers complement each other. For multiaxial elongations the various modes of deformation can be performed by means of the rotary clamp technique. With the strain rate components ordered such that \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₁₁ ? \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₂₂ ≥ \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₃₃, the ratio m = \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₂₂/\documentclass{article}\pagestyle{empty}\begin{document}$ \dot \varepsilon $\end{document}₁₁ characterizes the test mode. The Stephenson definition of the elongational viscosities makes use of the linear viscoelastic material equation and proves to be very efficient because the linear shear viscosity (t) (“stressing” viscosity) can act as the reference for the nonlinear behavior in elongation. Results are given for polyisobutylene measured not only in simple, equibiaxial, and planar elongations, but also in new test modes with a change of m during the deformation. This allows one to investigate the consequences of a deformation-induced anisotropy of the rheological behavior.     

Interactions in compatible polymer systems

Summary Dynamic mechanical measurements on polystyrene — poly(vinylmethylether) blends are demonstrating that the relaxation processes in the blends are mainly connected with the motions of the poly(vinylmethylether) chain.Concerning the effect of mixing on topological properties of the blends, an increase of the polydispersity of the relaxation processes is detected in blends with high molecular weight polystyrene while low molecular weight polystyrene exerts an effect of dilution upon the relaxation of the high molecular poly(vinylmethylether) chains.From these measurements as well as from thermoanalytical data it results that the energetic interaction is more pronounced in the blends with oligomeric than with high molecular weight polystyrene. The glass transition temperature shows a larger deviation from additivity for blends with high molecular polystyrene than for those with oligomeric polystyrene.Herrn Prof. Dr. M. Kryszewski zum 60. Geburtstag herzlichst gewidmet     

Reported food intake and distribution of body fat: a repeated cross-sectional study

Background  

Body mass, as well as distribution of body fat, are predictors of both diabetes and cardiovascular disease. In Northern Sweden, despite a marked increase in average body mass, prevalence of diabetes was stagnant and myocardial infarctions decreased. A more favourable distribution of body fat is a possible contributing factor.     

Foaming of nonionic surfactant solutions: Effect of surfactant concentration and temperature

Foaming of solutions of the nonionic surfactant, octoxynol 9, was investigated in the concentration range of 0.010 to 5.00% and in the temperature range of 7–37 C, well below the cloud point of 65 C, by measuring the height and stability of foams generated by pouring thin streams of surfactant solutions into a glass column. All foams were fast-thinning. Their height increased monotonically with surfactant concentration. The rate of change of foam height with log surfactant concentration underwent no change at the CMC of 0.018%, but was four times lower above 0.146% than below 0.146%. Foams at lower temperatures generally thinned somewhat more slowly and were stronger or more cohesive and more stable than foams generated at higher temperatures by surfactant solutions of comparable concentrations. Oxidative degradation reduced foam height somewhat. Octoxynol 9 and sodium lauryl sulfate, rated as a good foamer, produced foams of comparable volume and stability.