Bitterstoffe beim Erhitzen von Saccharose, Maltose und Prolin 2. Mitteilung

Summary In addition to the mono- and dipyrrolidinohexosereductones described recently (Z Lebensm Unters Forsch (1984) 178:356) two further bittertasting compounds were isolated from heated mixtures of proline and sucrose (molar ratio 3: 1, 190 °C, 30 min) and also synthesized, namely 2,3-bis-(1-pyrrolidinyl)2-cyclopenten-l-one and 2,3-bis(1-pyrrolidinyl)-5methyliden-2-cyclopenten-l-one. The recognition thresholds (mmol/1) are 0.15–0.25 and 0.06–0.12 respectively. Both compounds have a burning bitter taste character. From a maltose-proline reaction mixture 2--glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-one was isolated. When the dihydroxypyranone VI was heated with proline, 2,5-dihydroxy-5-methyl-4-prohnyl-2-cyclopenten-1-one and the cyclopent(b)azepinones XI and XII were among the compounds formed. These compounds also have a bitter taste character.Zusammenfassung Zusätzlich zu den kürzlich beschriebenen Mono- and Dipyrrolidinohexosereduktionen (Z Lebensm Unters Forsch (1984) 178:356) wurden zwei weitere bittere Verbindungen aus erhitzten Mischungen von Prolin and Saccharose (Molverhältnis 3:1, 190 °C, 30 min) isoliert and synthetisiert. Es handelt sich um 2,3-Bis-(1-Pyrrolidinyl)-2-cyclopenten-1-on und 2,3-Bis-(1-Pyrrolidinyl)-5-methyliden-2-cyclopenten-1-on. Die Erkennungsschwellenwerte (mmol/1) sind 0,15-0,25 and 0,06-0,12. Beide Verbindungen haben einen brennend-bitteren Geschmack. Aus einem Maltose-Prolin-Umsetzungsgemisch gelang die Isolierung des 2--Glucosyl-5-hydroxy-5-methyl-4-piperidinyl-2-cyclopenten-1-ons. Bei der Reaktion des Dihydropyranons VI mit Prolin wurden u. a. das 2,5-Dihydroxy-5-methyl-4-prolinyl2-cyclopenten-1-on sowie die Cyclopent(b)azepinone XI and XII gebildet. Diese Verbindungen sind ebenfalls mehr oder weniger stark bitter.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene

The commercial grade of isotactic polypropylene was modified by a specific β‐nucleating agent in a broad concentration range. The supermolecular structure of the specimens prepared by injection molding was characterized by X‐ray scattering and correlated with mechanical behavior. It was found that at a critical nucleant concentration of 0.03 wt % the content of the β‐modification virtually reaches a saturation level. With further addition of the nucleant, the β‐phase content increases only slightly. The long period passes through a distinct maximum at the same nucleant concentration. This singularity in structure remarkably correlates with a minimum of the yield stress and maxima of strain at break and fracture toughness. Such general behavior is also reflected in the correlation between the β‐phase concentration and fracture toughness profiles along the injection‐molded bars. It is suggested that in the critically nucleated material an optimum thickness of the amorphous interlayer with connecting chains between the β‐crystallites is established, rendering the material the highest possible ductility and toughness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1174–1184, 2002     

Interactions in compatible polymer systems

Summary Dynamic mechanical measurements on polystyrene — poly(vinylmethylether) blends are demonstrating that the relaxation processes in the blends are mainly connected with the motions of the poly(vinylmethylether) chain.Concerning the effect of mixing on topological properties of the blends, an increase of the polydispersity of the relaxation processes is detected in blends with high molecular weight polystyrene while low molecular weight polystyrene exerts an effect of dilution upon the relaxation of the high molecular poly(vinylmethylether) chains.From these measurements as well as from thermoanalytical data it results that the energetic interaction is more pronounced in the blends with oligomeric than with high molecular weight polystyrene. The glass transition temperature shows a larger deviation from additivity for blends with high molecular polystyrene than for those with oligomeric polystyrene.Herrn Prof. Dr. M. Kryszewski zum 60. Geburtstag herzlichst gewidmet     

Reported food intake and distribution of body fat: a repeated cross-sectional study

Background  

Body mass, as well as distribution of body fat, are predictors of both diabetes and cardiovascular disease. In Northern Sweden, despite a marked increase in average body mass, prevalence of diabetes was stagnant and myocardial infarctions decreased. A more favourable distribution of body fat is a possible contributing factor.     

Foaming of nonionic surfactant solutions: Effect of surfactant concentration and temperature

Foaming of solutions of the nonionic surfactant, octoxynol 9, was investigated in the concentration range of 0.010 to 5.00% and in the temperature range of 7–37 C, well below the cloud point of 65 C, by measuring the height and stability of foams generated by pouring thin streams of surfactant solutions into a glass column. All foams were fast-thinning. Their height increased monotonically with surfactant concentration. The rate of change of foam height with log surfactant concentration underwent no change at the CMC of 0.018%, but was four times lower above 0.146% than below 0.146%. Foams at lower temperatures generally thinned somewhat more slowly and were stronger or more cohesive and more stable than foams generated at higher temperatures by surfactant solutions of comparable concentrations. Oxidative degradation reduced foam height somewhat. Octoxynol 9 and sodium lauryl sulfate, rated as a good foamer, produced foams of comparable volume and stability.     

Effect of electrolytes on foaming of nonionic surfactant solutions

The effect of electrolytes and other additives on the foaming of solutions of the nonionic surfactant octoxynol 9 (Triton X-100) was investigated and correlated with their effect on the cloud point. Foams were generated by pouring solutions as a thin stream into a vertical tube. The height of the generally fast-draining foam columns was measured as a function of time, and their stability was rated according to the damage sustained within 13 min. The surfactant concentrations used, 0.050, 0.100 and 2.00%, were above the critical micelle concentration. Increasing concentrations increased foam height but not foam stability. The electrolytes NaCl and Na₂SO₄ salted the surfactant out. They reduced its cloud point in proportion to their concentration. They also reduced the foam height, albeit to a lesser extent than the cloud point, but hardly reduced the foam stability below the cloud point.