智能测温仪表的研究与实现

文章介绍了一种以8098单片机为核心、以铂铑一铂为测温元件研制的智能化测温仪表，它与传统的接触式温度传感器相比具有价格低、性能高、应用范围广、人机界面好等特点。     

Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition

In order to overcome the limitations of previous columnar-to-equiaxed (CET) models, which neglect melt convection and the movement of free equiaxed grains, this article presents a three-phase deterministic CET model. With appropriated multiphase volume-averaging approaches, it is possible to account for nucleation and growth of equiaxed grains ahead of a growing columnar front, the influence of melt convection, and grain sedimentation, and the occurrence of a CET in a casting of engineering scale. Special modeling assumptions ensure that both CET mechanisms, namely, “hard” and “soft” blocking, are tackled. It is highly recommended that both mechanisms should be considered, especially in the situation where grain sedimentation and melt convection are present. Although the current model incorporates almost all the physical variables relevant to a CET event, under special condition of a one-dimensional case, the model still reproduces the results of Hunt’s classical CET approach. This article is based on a presentation made in the symposium entitled “Solidification Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

房地产开发企业会计核算问题探讨

本文就房地产开发企业会计核算的现状及特点进行了分析,并提出了完善房地产开发企业会计核算规范的对策。     

Analysis of dinosaur samples by nuclear microscopy

Several dinosaur bone and eggshell fossil samples unearthed at different sites in China were analyzed by means of nuclear microscopy. Concentrations and distributions of elements such as Na, Mg, Al, P, S, Ca, Cr, Mn, Fe, Cu, Zn, As, Br, Sr, Y, Ce, Pb and U, etc. were obtained for each sample. The results of quantitative PIXE and RBS analyses show unusually high concentrations of U and Ce in several samples obtained from a period near the K-T boundary (between Cretaceous and Tertiary periods, 65 million years ago), suggesting that some form of environmental pollution could be the cause of dinosaur extinction.     

透水性沥青面层材料设计新法及应用

本文提出了一种根据主骨料空隙率设计透水性面层沥青混合料级配的新方法，根据这一方法设计的透水性沥青面层具有良好的路面使用功能，应用前景广阔。     

The relations of impregnated cathode properties to the tungsten matrix structure

Some data of emission and evaporation properties related to tungsten matrix structures of the impregnated cathodes are analyzed. The results indicate that the particle size of tungsten powder and the pore size in the porous matrix determine the total inside surface area of all pores, the diffusion length of barium atoms over tungsten grain surfaces, and the diameter and length of the path through which barium atoms are transported. These factors all relate to the properties and operation mechanism of an impregnated cathode; therefore, it would not be strictly correct to use only the matrix porosity for characterizing the cathode properties. Finally, the preferred structures of porous tungsten matrix depending on different applications of impregnated, cathodes are proposed.     

Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.