PAM/GO复合材料制备及驱油性能研究

利用改进的Hummers法制备氧化石墨烯(Graphene oxide,GO),并利用原位聚合法引入丙烯酰胺(AM),制备PAM/GO复合材料。采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、激光粒度分析和驱油实验等分析方法对PAM/GO复合材料的官能团和驱油性能进行了研究。X射线衍射(XRD)、傅里叶红外光谱(FTIR)实验结果表明,PAM/GO的谱图中,在2θ=9.4°的氧化石墨的特征峰消失,在2θ=23°出现一个宽的衍射峰,说明PAM/GO为无定形结构,也说明氧化石墨与PAM兼容性良好,没有发生明显的团聚。傅里叶变换红外光谱分析表明,PAM/GO红外谱图中具有很明显的丙烯酰胺特征峰,说明丙烯酰胺成功引入到氧化石墨烯中。激光粒度分析结果表明,石墨烯复合材料的平均粒径范围在0.19~1.45μm。界面张力分析表明,0.3%浓度的石墨烯材料降低油水界面张力的能力较好,与注入水相比,能将油水界面张力从101降低到100数量级左右。PAM/GO复合材料应用于低渗透岩心的动态驱替实验表明,0.3%浓度的石墨烯复合材料对低渗透油藏提高采收率在10%左右,且驱替压力变化平稳,不会对地层造成堵塞伤害。     

不同钙硅比水化硅酸钙力学性能的分子动力学模拟

基于Pellenq等的建模思路,构造了不同钙硅比(C/S)的水化硅酸钙(C-S-H)原子模型,采用分子动力学方法模拟了C-S-H在轴向拉伸载荷作用下的力学性能。重点比较分析了不同钙硅比的C-S-H在无水及含水情况下的拉伸应力-应变曲线。模拟结果表明:(1)与钙硅比为1.0的情况相比,钙硅比大于1.0时C-S-H结构的抗拉强度显著下降;(2)钙硅比大于1.0时,钙氧间的相互作用在承受载荷方面起重要作用,有效弥补了结构中因SiO_2基团缺失引起的缺陷,使得C-S-H的强度下降程度趋缓;(3)当应变达到一定程度时,水分子能够切断钙氧间的相互作用,使得C-S-H结构的强度进一步降低甚至引起断裂失效。     

低温预氧化对PIP-SiCf/SiC复合材料介电性能的影响

分析了低温预氧化过程对聚碳硅烷(PCS)先驱体结构的影响,研究了不同预氧化温度和时间下SiCf/SiC复合材料室温和高温介电性能的演变规律。结果表明:经预氧化处理后基体中的氧含量增加,生成具有低介电常数的Si CxOy相,且其含量随着预氧化温度的升高或时间的延长逐渐增加,SiC微晶和自由碳的含量均减少,因此SiCf/SiC复合材料的复介电常数明显降低,同时高温复介电常数的升高幅度显著减小。经260℃-6 h预氧化处理后,700℃时复合材料在整个X波段的反射率均达到-8 d B以下,高温吸波性能得到有效改善。     

我国汽车与环境协同发展进程中主要矛盾与发展方向研究

本文对我国目前汽车的污染物排放特征进行了研究,对各类汽车污染物排放的历史数据进行了分析、总结与建模,对未来排放趋势进行了预测,并对我国未来汽车与环境协同发展进程中的瓶颈与主要矛盾进行了总结与梳理,提出了适用于我国的汽车与环境协同发展路线与重点发展方向,给出了相应的发展建议与控制对策。     

新时代汽车强国战略研究综述(二)

"新时代汽车强国战略研究综述(一)"提出我国应抓住新一轮汽车变革机遇,加快推进汽车强国建设的结论。在此基础上,本文从问题出发,梳理出汽车强国建设的7个层面34项制约因素,对制约因素进行了分析研究,凝练出了10个瓶颈问题。接下来阐述了当前我国汽车发展的主要矛盾,并结合当前形势、问题与挑战对汽车强国建设进行了战略思考,提出我国需尽快启动新时代汽车强国战略的结论,并就战略实施提出了主要措施和重点方向。     

Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review

Electron beam melting (EBM), as one of metal additive manufacturing technologies, is considered to be an innovative industrial production technology. Based on the layer‐wise manufacturing technique, as‐produced parts can be fabricated on a powder bed using the 3D computational design method. Because the melting process takes place in a vacuum environment, EBM technology can produce parts with higher densities compared to selective laser melting (SLM), particularly when titanium alloy is used. The ability to produce higher quality parts using EBM technology is making EBM more competitive. After briefly introducing the EBM process and the processing factors involved, this paper reviews recent progress in the processing, microstructure, and properties of titanium alloys and their composites manufactured by EBM. The paper describes significant positive progress in EBM of all types of titanium in terms of solid bulk and porous structures including Ti–6Al–4V and Ti–24Nb–4Zr–8Sn, with a focus on manufacturing using EBM and the resultant unique microstructure and service properties (mechanical properties, fatigue behaviors, and corrosion resistance properties) of EBM‐produced titanium alloys.

     

Enhanced Thermal Conductivity of 5A Molecular Sieve with BNs Segregated Structures

5A molecular sieves have been widely used as adsorbents in cryogenic distillation for hydrogen isotope separation in fusion reactor engineering, but its low thermal conductivity is detrimental to the process stability. Improving the thermal conductivity of 5A molecular sieves is one of the most important goals for high‐performance devices. Here, firm segregated structures with boron nitride sheets (BNs) are constructed around 5A molecular sieve particles. SEM results show 30 µm BNs tend to form the better networks in comparison with that of 0.12 µm BNs at 40 wt% loadings. It is further verified that BNs with the larger size promote the thermal conductivity. Meanwhile, the thermal conductivity increases with the increasing amounts of BNs. XRD and specific surface area results indicate that the sintering and the addition of BNs exert negligible effects on the structure of 5A molecular sieve. These results indirectly show 5A molecular sieve with BNs segregated structures is very likely to be used for the application of hydrogen isotopic separation. Besides, this work provides new insight into the construction of segregated structure in inorganic porous materials.

     

Graphene Caging Silicon Particles for High‐Performance Lithium‐Ion Batteries

Silicon holds great promise as an anode material for lithium‐ion batteries with higher energy density; its implication, however, is limited by rapid capacity fading. A catalytic growth of graphene cages on composite particles of magnesium oxide and silicon, which are made by magnesiothermic reduction reaction of silica particles, is reported herein. Catalyzed by the magnesium oxide, graphene cages can be conformally grown onto the composite particles, leading to the formation of hollow graphene‐encapsulated Si particles. Such materials exhibit excellent lithium storage properties in terms of high specific capacity, remarkable rate capability (890 mAh g^?1 at 5 A g^?1), and good cycling retention over 200 cycles with consistently high coulombic efficiency at a current density of 1 A g^?1. A full battery test using LiCoO₂ as the cathode demonstrates a high energy density of 329 Wh kg^?1.     

Ultraviolet Photoluminescence of Carbon Nanospheres and its Surface Plasmon‐Induced Enhancement

Ultraviolet (UV) light can be used in versatile applications ranging from photoelectronic devices to biomedical imaging. In the development of new UV light sources, in this study, stable UV emission at ≈350 nm is unprecedentedly obtained from carbon nanospheres (CNSs). The origin of the UV fluorescence is comprehensively investigated via various characterization methods, including Raman and Fourier transform infrared analyses, with comparison to the visible emission of carbon nanodots. Based on the density functional calculations, the UV fluorescence is assigned to the carbon nanostructures bonded to bridging O atoms and dangling –OH groups. Moreover, a twofold enhancement in the UV emission is acquired for Au‐carbon core‐shell nanospheres (Au‐CNSs). This remarkable modification of the UV emission is primarily ascribed to charge transfer between the CNSs and the Au surface.