Mining predecessor–successor rules from DAG data

Data mining extracts implicit, previously unknown, and potentially useful information from databases. Many approaches have been proposed to extract information, and one of the most important ones is finding association rules. Although a large amount of research has been devoted to this subject, none of it finds association rules from directed acyclic graph (DAG) data. Without such a mining method, the hidden knowledge, if any, cannot be discovered from the databases storing DAG data such as family genealogy profiles, product structures, XML documents, task precedence relations, and course structures. In this article, we define a new kind of association rule in DAG databases called the predecessor–successor rule, where a node x is a predecessor of another node y if we can find a path in DAG where x appears before y. The predecessor–successor rules enable us to observe how the characteristics of the predecessors influence the successors. An approach containing four stages is proposed to discover the predecessor–successor rules. © 2006 Wiley Periodicals, Inc. Int J Int Syst 21: 621–637, 2006.     

The First Template‐Free Growth of Crystalline Silicon Microtubes

A simple template‐free high‐temperature evaporation method was developed for the growth of crystalline Si microtubes for the first time. As‐grown Si microtubes were characterized using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and room‐temperature photoluminescence. The lengths of the Si tubes can reach several hundreds of micrometers; some of them have lengths on the order of millimeters. Each tube has a uniform outer diameter along its entire length, and the typical outer diameter is ≈ 2–3 μm. Most of the tubes have a wall thickness of ≈ 400–500 nm, though a considerable number of them exhibit a very thin wall thickness of ≈ 50 nm. Room‐temperature photoluminescence measurement shows the as‐synthesized Si microtubes have two strong emission peaks centered at ≈ 589 nm and ≈ 617 nm and a weak emission peak centered at ≈ 455 nm. A possible mechanism for the formation of these Si tubes is proposed. We believe that the present discovery of the crystalline Si microtubes will promote further experimental studies on their physical properties and smart applications.     

油品质量检验工作中应注意的十个问题

介绍了油品质检员做好油品检验工作在具体操作试验中应注意的十个问题，以确保试验数据真实有效，结论准确。     

大型往复式压缩机的配管设计

大型往复式压缩机功率大、占地面积大,管道振动问题也更为突出。笔者结合实践经验,对大型往复式压缩机的配管设计进行探讨,说明了平面布置与管道防振设计的密切关系,并介绍了管道防振设计的方法和步骤,以及相对简单的复杂管系气柱固有频率的转移矩阵计算方法。     

区域分割法辅助计算复杂图像面积

介绍计算具有复杂边缘轮廓的图像面积的区域分割法。采用鼠标多边形作图法近似圈定待处理的图像区域。本文由格林定理出发得到有限连续边界与其包围区域面积之间的函数关系,并且应用这一函数关系得出多边形与其包围区域面积的数学关系,近似得到图像区域面积。文中以烟幕图像为例对上述结论进行了验证。文章最后给出了在VC++环境下实现多边形分割的部分源代码。     

Data-efficient blind OFDM channel estimation using receiver diversity

We investigate non data-aided channel estimation for cyclically prefixed orthogonal frequency division multiplexing (OFDM) systems. By exploiting channel diversity using only two receive antennas, a blind deterministic algorithm is proposed. Identifiability conditions are derived that guarantee the perfect channel retrieval in the absence of noise. In the presence of noise, the proposed method has the desired property of being data efficient-only a single OFDM block is needed to achieve good estimation performance for a wide range of SNR values. The algorithm is also robust to input symbols as it does not have any restriction on the input symbols with regard to their constellation or their statistical properties. In addition, this diversity-based algorithm is computationally efficient, and its performance compares favorably to most existing blind algorithms.     

不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

电沉积纳米ZnO薄膜

在硝酸锌溶液中电沉积ZnO，通过正交试验方法研究槽液浓度、pH值以及电流密度对纳米ZnO薄膜电沉积的作用。用XRD分析了纳米ZnO的组织、结构与成分，SEM获得了纳米ZnO的表面形貌。     

SrTiO3基压敏电阻的研究及其在武器系统中的应用

电子设备的广泛使用带来的设备干扰及浪涌冲击等问题使人们开始关注SrTiO3基压敏电阻器件材料的开发.本文介绍了SrTiO3基压敏电阻的一般制造配方和工艺流程.和ZnO基压敏电阻相比,此材料在低压领域具有更优良的电气性能,如较大的电容量(C=10～150nF);在高于电压临界值又具有较低压敏电压;非线性系数在5～43之间可调;耐浪涌能量大;并且具有自复位特性.这些特性使得它具有高频噪声吸收、前沿快速上升型脉冲噪声吸收和浪涌吸收等功能.针对武器系统的高性能要求,本文提出了SrTiO3基压敏电阻在直流电机消噪、电源输入端、吸收电感性负载开关浪涌、旁路电容器、通信线路防护、防止电涌冲击等方面的应用.     

电荷耦合器件积分时间对微型成像系统成像质量的影响

在光圈固定的情况下，确定合适的积分时间对于提高微型电荷耦合器件(CCD)成像系统的成像质量，增强微型飞行器的侦察能力具有十分重要的意义。本文讨论了决定CCD积分时间的各种因素，重点研究了适用于微型飞行器的CCD成像系统的积分时间与像移的关系，并进一步推导了计算像移量的相关数学模型。利用该模型对不同积分时间内采集的运动图像进行了像质评价，结果表明，在保证曝光量的前提下，当像移量被限制在1个像素内时，可以获得相对理想的运动图像像质。