Identification and characterization of epitopes on the 120-kilodalton surface protein antigen of Rickettsia prowazekii with synthetic peptides

The 120-kDa surface protein antigens (SPAs) of typhus rickettsiae are highly immunogenic and have been shown to be responsible for the species-specific serological reactions of the typhus group rickettsiae. To study the immunochemistry of these proteins, overlapping decapeptides encompassing the whole protein were synthesized on derivatized polyethylene pins. A modified enzyme-linked immunosorbent assay was used to identify epitopes recognized by rabbit hyperimmune antisera to Rickettsia prowazekii SPA. Eight distinct epitopes were mapped by this method in three regions. Four of the epitopes, which were located in the carboxyterminus of mature processed SPA, were strongly competitively inhibited by native folded SPA but not by intact rickettsiae, suggesting that they were on the SPA surface but not exposed on the rickettsial surface. Three of these epitopes were present on both R. prowazekii and Rickettsia typhi SPAs. The immunoreactivities of five epitopes were further characterized by synthesizing modified peptides. Glycine substitution experiments determined the critical residues in the epitopes. The dependence of binding of the peptide epitopes to the polyclonal antisera was mapped to single residues. The limited number and weak reactivity of linear peptide epitopes observed with human and rabbit sera, possibly due to a lack of the methylated amino acids which are present in rickettsia-derived SPA, suggest that the present approach will not provide useful synthetic antigens for diagnosis of typhus infections.     

A modified algorithm for calculating the cloud index

The cloud index is an important component of the Heliosat algorithm, which estimates solar radiation components from Meteosat High Resolution Visible images. The cloud index quantifies the reflective properties of the atmosphere, and varies from 0 at clear conditions to 1 at overcast. The algorithm is semi-empirical in the way that it includes several constants that need to be tuned. Some of these were removed in the Heliosat-II algorithm where the Meteosat calibration constant was introduced to replace the “pseudo-reflectivity” with a “real reflectivity”. This approach is followed here, and two additional changes are made: (1) An analytical expression is introduced to correct for backscattered radiation from air molecules. (2) A correction is made for non-lambertian reflectivity, removing the time consuming need for determining the ground reflectivity for each month and each slot. The new cloud index is used to calculate global irradiances which are validated against hourly measurements from five European ground stations. The average root mean square deviation is 15.5% for a six-month spring/summer period, of comparable accuracy as using the more time consuming traditional algorithm used in the EU project Satel-Light.     

Assessment of nutritive value of cereal and legume straws based on chemical composition and in vitro digestibility

The nutritive value of 17 straws was determined on the basis of their chemical composition, in vitro dry matter (DM) digestibility and rumen fermentation kinetics (from gas production curves measured in vitro). Five roughages were from the cereal species Avena sativa (oat), Hordeum vulgare (barley), Secale cereale (rye), Triticum aestivum (wheat) and Zea mays (maize stover). The other 12 samples were legume straws, two samples from each of the species Cicer arietinum (chickpea), Lens culinaris (lentil) and Phaseolus vulgaris (bean) and one sample from each of the species Lathyrus sativus (chickling vetch), Lupinus albus (white lupin), Pisum sativum (field pea), Vicia articulata (one‐flowered vetch), Vicia ervilia (bitter vetch) and Vicia sativa (common vetch). All samples were collected after harvesting from different farms located in León (northwestern Spain). Based on their chemical composition, digestibility and gas production characteristics, species could be clustered into two groups with a significant linkage distance, one for cereal straws that merged at a level of similarity of 80% and the other for legume straws with a degree of similarity of 50%. Species varied widely and significant differences (P < 0.05) were observed between the two groups of straws. Legume straws showed higher crude protein (74 ± 6.1 vs 29 ± 2.2 g kg^?1 DM) and lower fibre (584 ± 18.1 vs 793 ± 27.5 g neutral detergent fibre kg^?1 DM) contents than cereal straws and, consequently, DM digestibility coefficients (0.670 vs 0.609; standard error of difference 0.0054) and metabolisable energy values (7.4 ± 0.15 vs 5.7 ± 0.24 MJ kg^?1 DM) were significantly greater in legume than in cereal straws. Although there were noticeable differences among species within each botanical family, legume straws showed better nutritional quality than cereal straws, indicating that they could be considered promising and interesting sources of roughage for incorporation into ruminant diets. Copyright © 2005 Society of Chemical Industry     

Polyaniline nanotubes: conditions of formation

The courses of aniline oxidation with ammonium peroxydisulfate in aqueous solutions of strong (sulfuric) and in weak (acetic) acids, followed by temperature and acidity changes, are different. In solutions of sulfuric acid, granular polyaniline (PANI) was produced; in solutions of acetic acid, PANI nanotubes were obtained. The external diameter of the nanotubes was 100–300 nm, the internal cavity 20–100 nm, and the length extended to several micrometres. The morphology of PANI, granular or tubular, depends on the acidity conditions during the reaction rather than on the chemical nature of the acid. PANI nanotubes were also produced when aniline was oxidized in the absence of any acid. The bulk conductivity of PANI prepared in solutions of acetic acid was 0.08–0.27 S cm^?1, depending on the acid concentration. Protonated PANI prepared in sulfuric and acetic acids were deprotonated with ammonium hydroxide to obtain PANI bases and the ammonium salt of the protonating acid. FTIR spectroscopy showed the differences in the molecular structure of the PANI bases. Irrespective of whether the polymerization was performed in solutions of sulfuric or acetic acid, PANI had hydrogen sulfate counter‐ions only. The PANI morphology is thus not controlled by the nature of counter‐ions. The acidity of the reaction medium determines the protonation of monomer, oligomer and polymer species. The chemistry of aniline oxidation is likely to be affected especially by the protonation of an intermediate in the pernigraniline form. It is proposed that, in the course of aniline oxidation, pH‐dependent self‐assembly of aniline oligomers predetermines the final PANI morphology. Copyright © 2005 Society of Chemical Industry     

Overview: Signal production and detection.

Studies of signal production and detection are complicated by the diverse modalities used by animals, constraints of human signal perception, and limitations of a controlled laboratory environment. These complications can be addressed by creative approaches to studying anatomical adaptations for signal production and detection, innovative technology, and careful studies of signal production and detection in the field. These solutions should overcome the perceptual limitations of researchers as they explore Umwelten in other species. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Standby supply voltage minimization for deep sub-micron SRAM

Suppressing the leakage current in memories is critical in low-power design. By reducing the standby supply voltage (V_DD) to its limit, which is the data retention voltage (DRV), leakage power can be substantially reduced. This paper models the DRV of a standard low leakage SRAM module as a function of process and design parameters, and analyzes the SRAM cell stability when V_DD approaches DRV. The DRV model is verified using simulations as well as measurements from a 4 KB SRAM chip in a 0.13 μm technology. Due to a large on-chip variation, DRV of the 4 KB SRAM module ranges between 60 and 390 mV. Measurements taken at 100 mV above the worst-case DRV show that reducing the SRAM standby V_DD to a safe level of 490 mV saves 85% leakage power. Further savings can be achieved by applying DRV-aware SRAM optimization techniques, which are discussed at the end of this paper.     

Safety-relevant mode confusions—modelling and reducing them

Mode confusions are a significant safety concern in safety-critical systems, for example in aircraft. A mode confusion occurs when the observed behaviour of a technical system is out of sync with the user's mental model of its behaviour. But the notion is described only informally in the literature. We present a rigorous way of modelling the user and the machine in a shared-control system. This enables us to propose precise definitions of ‘mode’ and ‘mode confusion’ for safety-critical systems. We then validate these definitions against the informal notions in the literature. A new classification of mode confusions by cause leads to a number of design recommendations for shared-control systems. These help in avoiding mode confusion problems. Our approach supports the automated detection of remaining mode confusion problems. We apply our approach practically to a wheelchair robot.     

Stress singularities in a periodically layered composite near interface crack tips

The paper deals with the asymptotic analysis of stresses near interface crack tips in the periodically two-layered elastic composites. The problem is investigated for the plane state of strain within the framework of the homogenized model with microlocal parameters. The angular dependence of stresses at the crack tip is presented for different mechanical and geometrical properties of the composite.