Characterization of PA-12 specimens fabricated by projection sintering at various sintering parameters

Large area projection sintering (LAPS) promises to be a new method in the field of additive manufacturing. Developed in the Mechanical Engineering Department, University of South Florida, LAPS uses long exposure times over a broad area of powder to fuse into dense, reproducible materials. In contrast, LS, a common powder-based additive manufacturing, uses a focused beam of light scanned quickly over the material. Local regions of concentrated high-energy bursts of light lead to higher peak temperatures and differing cooling dynamics and overall crystallinity. The mechanical properties of laser sintered specimens suffer because of uneven particle fusion. LAPS offers the capacity to fine-tune fusion properties through enhanced thermodynamic control of the heating and cooling profiles for sintering. Further research is required to identify the relationship between LAPS build settings and part properties to enable the fabrication of custom parts with desired properties. This study examines the influence of LAPS sintering parameters on chemical structures, crystallinity, mechanical, and thermal properties of polyamide-12 specimens using powder X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, small-angle X-ray scattering, scanning electron microscopy, and microhardness testing. It was observed that higher crystallinity was imparted to specimens that were sintered for a shorter time and vice versa.     

Proton Nuclear Magnetic Resonance-Based Method for the Quantification of Epoxidized Methyl Oleate

Epoxidized methyl esters (EMO) with their high oxirane ring reactivity, acts as a raw material in the synthesis of various industrial chemicals including polymers, stabilizers, plasticizers, glycols, polyols, carbonyl compounds, biolubricants etc. EMO has been generally quantified by the gas chromatography (GC) and high-performance liquid chromatography (HPLC) techniques. Taking into the account of the limitations of these techniques, two qHNMR-based equations have been proposed for the quantification of EMO in the mixture of EMO and methylesters (MO). The validity of the proposed method was determined using standard mixtures of MO and EMO having different molar concentrations. The developed equations have been applied on the samples of EMO prepared from oleic acid in two-step process viz., esterification followed by epoxidation. The qHNMR-based EMO quantification showed acceptable agreement with the results obtained from HPLC analysis.     

An Improved Protocol for Agrobacterium-Mediated Transformation in Subterranean Clover (Trifolium subterraneum L.)

Subterranean clover (Trifolium subterraneum) is the most widely grown annual pasture legume in southern Australia. With the advent of advanced sequencing and genome editing technologies, a simple and efficient gene transfer protocol mediated by Agrobacterium tumefaciens was developed to overcome the hurdle of genetic manipulation in subterranean clover. In vitro tissue culture and Agrobacterium transformation play a central role in testing the link between specific genes and agronomic traits. In this paper, we investigate a variety of factors affecting the transformation in subterranean clover to increase the transformation efficiency. In vitro culture was optimised by including cefotaxime during seed sterilisation and testing the best antibiotic concentration to select recombinant explants. The concentrations for the combination of antibiotics obtained were as follows: 40 mg L⁻¹ hygromycin, 100 mg L⁻¹ kanamycin and 200 mg L⁻¹ cefotaxime. Additionally, 200 mg L⁻¹ cefotaxime increased shoot regeneration by two-fold. Different plant hormone combinations were tested to analyse the best rooting media. Roots were obtained in a medium supplemented with 1.2 µM IAA. Plasmid pH35 containing a hygromycin-resistant gene and GUS gene was inoculated into the explants with Agrobacterium tumefaciens strain AGL0 for transformation. Overall, the transformation efficiency was improved from the 1% previously reported to 5.2%, tested at explant level with Cefotaxime showing a positive effect on shooting regeneration. Other variables in addition to antibiotic and hormone combinations such as bacterial OD, time of infection and incubation temperature may be further tested to enhance the transformation even more. This improved transformation study presents an opportunity to increase the feeding value, persistence, and nutritive value of the key Australian pasture.     

Effect of domestic processing on flatus producing factors in ricebean (Vigna umbellata)

The effect of various processing treatments viz., soaking, pressure cooking, open pan cooking, germination followed by pressure cooking and roasting of whole ricebean and pressure cooking, open pan cooking and fermentation and frying of fermented batter of dehulled ricebean flour was assessed for total sugars and oligosaccharide contents. Dehulling caused a significant reduction in the raffinose and stachyose contents. Pre-soaking of ricebean caused appreciable losses in the oligosaccharide content. Germination (48 h) followed by pressure cooking and fermentation (18 h) followed by frying caused the maximum losses in the raffinose and stachyose contents.     

Differential sensitivity of Desi (small‐seeded) and Kabuli (large‐seeded) chickpea genotypes to water stress during seed filling: effects on accumulation of seed reserves and yield

Water stress during the reproductive phase, especially during seed development, is considered detrimental for chickpea yield. In the present study, the relative sensitivity of Desi and Kabuli chickpea types to water stress during seed filling was assessed in terms of effects on quantitative and qualitative aspects of seed yield. Leaves of both types experienced stress injury (evaluated as electrolyte leakage) to the same extent and possessed almost similar values of water potential at the end of 14 days of water stress. The stressed plants of Kabuli type lost more chlorophyll and had less photosynthesis than Desi type. At maturity, Desi type showed more diminution of vegetative dry matter due to stress over control than Kabuli type. On the other hand, Kabuli type showed a proportionally greater reduction in seed weight per plant, average seed weight, average seed size, number of pods (single‐ and double‐seeded) and harvest index. The stressed seeds of Kabuli type showed 48 and 46% reduction over control in starch and protein content compared with 25 and 40%, respectively in Desi type. The accumulation of soluble sugars was relatively greater due to stress in Kabuli (47%) than Desi type (23%). Fat and fiber content declined by 39 and 35% over control in Desi seeds because of stress whereas Kabuli type showed 46 and 67% decreases, respectively. Protein fractions, namely albumins, globulins, glutelins and prolamins, decreased in stressed seeds of Kabuli by 32, 40, 16 and 15% over control relative to 40, 48, 30 and 28%, respectively, in Kabuli type. The activities of sucrose synthase, invertase and soluble starch synthase were inhibited to a higher extent in Kabuli seeds than Desi seeds under stress. Kabuli seeds showed significantly more reduction in the accumulation of amino acids such as phenylalanine + tyrosine, tryptophan, valine, alanine and histidine and minerals (Ca, P, Fe) due to stress compared with Desi type. Copyright © 2006 Society of Chemical Industry     

Use of statistical methods for estimation of total number of charges in a mass spectrometry experiment

Estimation of the number of ions in a mass spectrometry experiment is needed to determine instrumentation parameters such as ionization efficiency, collision-induced dissociation efficiency, ion-transfer efficiency, ion trapping efficiency, and preamplifier detection limit. This work aims at analyzing the statistical characteristics (primarily variance) in the intensities of the isotopic distributions, which depend on the number of ions in the cell. A mathematical derivation was developed based on the maximum likelihood estimation method, which estimates the most likely number of ions in the cell using a method known as nonrandom parameter estimation. The performance of the method improves with increase in the number of observed distributions. The method works well provided the spectra show isotopic resolution and is independent of the instrument or method used to arrive at the spectra.     

Crystallization kinetics of bulk amorphous Se-Te-Sn system

In the present work crystallization kinetics of the amorphous Se_80–xTe₂₀Sn_x (0 x 9) system have been investigated using Differential Scanning Calorimetry. From the heating rate dependence of the glass transition temperature and the crystallization temperature the activation energy for the glass transition and that for crystallization have been determined using the Kissingers equation and Matusitas equation for non-isothermal crystallization of materials. The effect of addition of Sn to the Se-Te system on the dimentionality of crystal growth has been investigated. An increase in the glass transition temperature with increase in Sn content suggests that Sn plays a role in cross-linking the already existing Se-Te chains which causes an increase in the thermal stability of the material.     

Permeation enhancers for transdermal drug delivery

The transdermal route has been recognized as one of the highly potential routes of systemic drug delivery and provides the advantage of avoidance of the first-pass effect, ease of use and withdrawal (in case of side effects), and better patient compliance. However, the major limitation of this route is the difficulty of permeation of drug through the skin. Studies have been carried out to find safe and suitable permeation enhancers to promote the percutaneous absorption of a number of drugs. The present review includes the classification of permeation enhancers and their mechanism of action; thus, it will help in the selection of a suitable enhancer(s) for improving the transdermal permeation of poorly absorbed drugs.     

An analytical drain current model for graded channel cylindrical/surrounding gate MOSFET

In the present paper, a comprehensive drain current model incorporating various effects such as drain-induced barrier lowering (DIBL), channel length modulation and impact ionization has been developed for graded channel cylindrical/surrounding gate MOSFET (GC CGT/SGT) and the expressions for transconductance and drain conductance have been obtained. It is shown that GC design leads to drain current enhancement, reduced output conductance and improved breakdown voltage. The effectiveness of GC design was examined by comparing uniformly doped (UD) devices with GC devices of various L₁/L₂ ratios and doping concentrations and it was found that GC devices offer superior characteristics as compared to the UD devices. The results so obtained have been compared with those obtained from 3D device simulator ATLAS and are found to be in good agreement.