Synthesis and Photocrosslinking Reaction of N-Allylcarbamoylmethyl Cellulose Leading to Hydrogel

Summary The reaction of the carboxymethyl cellulose sodium salt (Na-CMC) (degrees of substitution (DS) = 1.2) with N-hydroxysuccinimide (Su-OH) in the presence of 1-hydroxybenzotriazole and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was carried out in water to obtain the Su-OH ester of carboxymethyl cellulose, Su-CMC, with the DS values of 0.19 – 1.04. N-Allylcarbamoylmethyl cellulose (Allyl-CMC), which was prepared from the reaction of Su-CMC with an excess amount of allylamine, was crosslinked by UV-irradiation. In addition, the photocrosslinked Allyl-CMC film was swollen with water to form a hydrogel having a relatively high water-swelling property, e.g., the degree of swelling (ds) was ca. 360% for Allyl-CMC with the DS of 0.93.     

Anomalous oxide scale formation under exposure of sodium containing gases for solid oxide fuel cell alloy interconnects

Reactivity of oxide scale on Fe-Cr alloy with Na-containing gases was examined to estimate the stability against sodium (Na): vapors of NaCl and Na₂SO₄ exposures with air flow at 1073 K. The identified reaction phases were Cr-Mn spinel, Cr₂O₃, and alloy from the X-ray diffraction of surface with no Na-reaction products. However, the protective oxide scales (Mn-Cr spinel and Cr₂O₃ layers) on the Fe-Cr alloy were partially decomposed by reacting with Na to form Na-compounds inside the oxide scale/alloy interfaces. In some parts, anomalous oxide scales were found around the oxide scale/Fe-Cr alloy interfaces, with forming Na-rich compounds: the compounds were distributed inner parts of oxide scales around oxide scale/alloy interfaces. The stability of oxide scales and degradation were discussed based on the observed distribution of elements.     

Control of island formation on silicon surfaces using ultra-high-vacuum scanning electron microscopy

In situ scanning electron microscopy has been used to control Au island formation on a patterned Si(111) surface with a periodic array of atomic-step bunches and holes. Liquid phase Au-Si islands were observed to redistribute on the patterned surface by annealing. The islands accumulate at a particular position of the step bunch in each pattern unit. This phenomenon is interpreted in terms of the energetic stability of a droplet on a patterned surface.     

Carbonization of adamantane to a graphitizable carbon

Adamantane was carbonized in sealed tubes to 1073 K. Despite the non-planar molecular structure of adamantane, the resulting carbon was graphitizable. Using i.r. and u.v. spectrometry, mass spectrometry and X-ray diffraction, it was found that adamantane begins to decompose at ≈ 823 K to yield such planar molecules as phenanthrene, methyl-phenanthrene and pyrene. These molecules lead to a graphitizing carbon through a carbonization process which is similar to that of a pitch.     

Speech recognition using pulse-coupled neural networks with a radial basis function

We have developed a novel pulse-coupled neural network (PCNN) for speech recognition. One of the advantages of the PCNN is in its biologically based neural dynamic structure using feedback connections. To recall the memorized pattern, a radial basis function (RBF) is incorporated into the proposed PCNN. Simulation results show that the PCNN with a RBF can be useful for phoneme recognition. This work was presented in part at the 7th International Symposium on Artificial Life and Robotics, Oita, Japan, January 16–18, 2002     

Formation of the myosin.ADP.gallium fluoride complex and its solution structure by small-angle synchrotron X-ray scattering

The products of the SOS-regulated umuDC operon are required for most UV and chemical mutagenesis in Escherichia coli, a process that results from a translesion synthesis mechanism. The UmuD protein is activated for its role in mutagenesis by a RecA-facilitated autodigestion that removes the N-terminal 24 amino acids. A previous genetic screen for nonmutable umuD mutants had resulted in the isolation of a set of missense mutants that produced UmuD proteins that were deficient in RecA-mediated cleavage (J. R. Battista, T. Ohta, T. Nohmi, W. Sun, and G. C. Walker, Proc. Natl. Acad. Sci. USA 87:7190-7194, 1990). To identify elements of the UmuD' protein necessary for its role in translesion synthesis, we began with umuD', a modified form of the umuD gene that directly encodes the UmuD' protein, and obtained missense umuD' mutants deficient in UV and methyl methanesulfonate mutagenesis. The D39G, L40R, and T51I mutations affect residues located at the UmuD'2 homodimer interface and interfere with homodimer formation in vivo. The D75A mutation affects a highly conserved residue located at one end of the central strand in a three-stranded beta-sheet and appears to interfere with UmuD'2 homodimer formation indirectly by affecting the structure of the UmuD' monomer. When expressed from a multicopy plasmid, the L40R umuD' mutant gene exhibited a dominant negative effect on a chromosomal umuD+ gene with respect to UV mutagenesis, suggesting that the mutation has an effect on UmuD' function that goes beyond its impairment of homodimer formation. The G129D mutation affects a highly conserved residue that lies at the end of the long C-terminal beta-strand and results in a mutant UmuD' protein that exhibits a strongly dominant negative effect on UV mutagenesis in a umuD+ strain. The A30V and E35K mutations alter residues in the N-terminal arms of the UmuD'2 homodimer, which are mobile in solution.     

TEM,XPS and SIMS Analyzes on Grain Boundary of Lanthanum Chromites

The morphological characteristics, chromium valence state, and cation transport in the vicinity of grain boundary in La_1-xCa_xCrO₃ were investigated by using TEM/EDS, XPS and SIMS techniques. The width of grain boundary was around 1 nm where anomalous enrichment of calcium was observed. Higher valence state of chromium such as Cr⁶⁺(d⁰) was detected in the grain boundaries whereas Cr³⁺(d³) and Cr⁴⁺(d²) were dominant in the bulk. Very fast interdiffusion of alkaline earths was observed in the Sr²⁺-La_0.75Ca_0.25CrO₃ system. All observed phenomena were correlated by assuming the A-site vacancy which may be induced by the formation of Cr⁶⁺ at grain boundaries.     

Void formation mechanism in VLSI aluminum metallization

Void formation is aluminum lines caused by high-temperature heat treatment has been investigated, particularly from the aspect of mechanical interaction between the passivation layer and aluminum lines. It is found that there are two effects causing voids in aluminum lines: the deformation of the passivation layer and the so-called thermal expansion mismatch between aluminum lines and their surrounding layers. While the thermal expansion effect is independent of aluminum line dimensions, the passivation deformation effect dominates preferentially in wide aluminum lines. Bulge deformation of the passivation layer is caused by its own compressive stress, forcing the encapsulated aluminum to expand. In fine lines, void formation is controlled by the volume difference caused by the thermal expansion mismatch and aluminum diffusion