On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Enhanced strain hardening in elongational viscosity for HDPE/crosslinked HDPE blend. I. Characteristics of crosslinked HDPE

Blending a crosslinked high‐density polyethylene (xHDPE) enhances melt strength and strain hardening behavior in elongational viscosity of high‐density polyethylene (HDPE) to a great degree. Gel fraction of xHDPE has a stronger effect on the strain hardening than sol fraction, although sol fraction also enhances the strain hardening to some degree. Further, the xHDPE crosslinked by peroxide in a compression mold exhibits more pronounced effect than xHDPE by radiation, which is attributed to the difference in the amount of the gel fraction. The xHDPE, which enhances the strain hardening, has sparse crosslink points in the network. Moreover, it was found from linear viscoelastic measurements, such as oscillatory modulus and relaxation modulus, that the xHDPE is characterized as a critical gel, which was also supported by the result of tensile testing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 73–78, 2002     

Enhanced corrosion prevention effect of polysulfone–clay nanocomposite materials prepared by solution dispersion

A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004     

Surface and thermal characteristics of rubber‐modified aromatic polyamide

Polyamide/epoxysilane (coupling agent) composites were reacted with poly(dimethylsiloxane) (PDMS), a condensation product of diethoxydimethylsilane (DEDMS), by a sol–gel process. Polyamide–PDMS nanocomposites were obtained. The existence of the condensation product of DEDMS and the reaction between the epoxy group and the polyamide were confirmed with Fourier transform infrared, attenuated total reflection, and wide‐scanning X‐ray photoelectron spectroscopy. Atomic force microscopy and contact‐angle measurements showed that the surface properties of polyamide were greatly improved by the addition of PDMS. The pyrolysis temperature of polyamide with PDMS was approximately 400°C, and the pyrolysis temperature was similar to that of pure polyamide. Also, the char contents increased with the addition of PDMS. The glass‐transition temperature of polyamide with or without PDMS was approximately 140°C according to differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1947–1955, 2004     

高寿命弥散型透气砖的研制及应用

采用电熔Ａｌ２Ｏ３添加适量氧化铬和复合结合剂，试制出具有较好的抗周期性热冲击，抗侵蚀渗透和固结作用的高寿命弥散型透气砖。该砖透气性能理想，工作安全、可靠，实现了透气砖寿命与包龄同步。     

Kinetic and molecular weight control for methyl methacrylate semibatch polymerization. II. Open control

The gel effect will bring a violent increase of conversion for methyl methacrylate (MMA) polymerization in a short time. It will be very dangerous for the reactor, as it causes an increase of molecular weight and broadens the molecular weight distribution. To unify the kinetics, molecular weight, and its distribution, on the basis of the mathematical models for semibatch polymerization of MMA, three controlled objectives that are the heat load distribution index, the change in molecular weight, and molecular weight distribution index are presented. Three materials (monomer, solvent, and chain transfer agent) and their flow rate and feeding mode are analyzed for the open control of kinetics, molecular weight, and its distribution. The optimum flow rate and mode are obtained. The heat load distribution index and molecular weight distribution index are even less than 2.0 and 2.2, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4399–4405, 2006     

Time Deformation,Continuous Euler Processes and Forecasting

Abstract. A continuous Euler model has time‐varying coefficients. Through a logarithmic time transformation, a continuous Euler model can be transformed to a continuous autoregressive (AR) model. By using the continuous Kalman filtering through the Laplace method, this article explores the data application of a continuous Euler process. This time deformation of an Euler process deforms specific time‐variant (non‐stationary) behaviour to time‐invariant (stationary) data on the deformed time scale. With these time‐invariant data on the transformed time scale, one may use traditional tools to conduct parameter estimation and forecasts. The obtained results can then be transformed back to the original time scale. Simulated data and actual data such as bat echolocation and the US residential investment growth are used to demonstrate the usefulness of time deformation in forecasting. The results indicate that fitting a traditional autoregressive moving‐average (ARMA) model on an Euler data set without imposing time transformation leads to forecasts that are out of phase while the forecasts of an Euler model stay mostly in phase.     

In situ composite of nano SiO2-P(VDF-HFP) porous polymer electrolytes for Li-ion batteries

Nano SiO₂-P(VDF-HFP) composite porous membranes were prepared as the matrix of porous polymer electrolytes through in situ composite method based on hydrolysis of tetraethoxysilane and phase inversion. SEM, TEM, DSC and AC impedance analysis were carried out. It is found that the in situ prepared nano silica was homogeneously dispersed in the polymeric matrix, enhanced conductivity and electrochemical stability of porous polymer electrolytes, and improved the stability of the electrolytes against lithium metal electrodes. The in situ composite method was found to be much better than the direct composite method in lowering the interfacial resistance between electrolyte and lithium metal electrode. Moreover, cycle test of lithium batteries using lithium metal as anode and sulfur composite material as cathode showed that the electrolyte based on in situ composite of silica presented stable charge-discharge behavior and little capacity loss of battery.     

3-溴-4-氟苯甲醛的气相色谱分析方法

采用气相色谱法,氢火焰离子化检测器,选用3%OV-17填充柱,正十三烷为内标,气化室和检测器温度为180℃,柱温120℃,对3溴4氟苯甲醛进行定量测定。该方法简单、快速、准确、适用,标准偏差0.26%,变异系数0.27%,平均回收率100.1%。     

两类昆虫生长调节剂作用机制的比较

两种昆虫生长调节剂——几丁质合成抑制剂和非舀类蜕皮激素类似物虽然都是作用于蜕皮过程，但有着截然不同的作用机制，本文对这两种杀虫剂作用机制的研究进展进行了总结和比较。