Reliability Analysis Method on Repairable System with Standby Structure Based on Goal Oriented Methodology

This paper presents a reliability analysis method on repairable system with standby structure based on goal oriented (GO) methodology. Firstly, a new combination of GO operator, which is composed of a new logical GO operator named Type 18A operator and a new auxiliary GO operator named Type 20 operator, is created to represent standby mode. The availability formula of standby equipment with translation exception is deduced based on Markov process theory. Then, the application method of combination of GO operator for standby mode and the analysis process of repairable system with standby structure based on GO method are proposed. Thirdly, this new combination of GO operator is applied in availability analysis of the hydraulic oil supply system of power‐shift steering transmission. Finally, the results obtained by the new GO method are compared with the results of fault tree analysis, Monte Carlo simulation, GO methods using Type 2 operator and Type 18 operator to represent the standby mode, respectively. And the comparison results show that this new GO method is applicable and reasonable for reliability analysis of repairable system with standby structure. All in all, this paper provides guidance for reliability analysis of repairable systems with standby structure. Copyright © 2015 John Wiley & Sons, Ltd.     

Control Charts for the Lognormal Mean

Among a set of tools that form the core of statistical process control, statistical control charts are most commonly used for controlling, monitoring, and improving processes. The conventional control charts are based on the assumption that the distribution of the quality characteristic to be monitored follows the normal distribution. However, in real applications, many process distributions may follow a positively skewed distribution such as the lognormal distribution. In this study, we discuss the construction of several control charts for monitoring the mean of the lognormal distribution. A real example is used to demonstrate how these charts can be applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

Modelling and Thermal Analysis of Tray‐layered Fruits inside Ventilated Packages during Forced‐air Precooling

Ventilated packaging is widely used in the forced‐air precooling practice for horticultural produce. Fresh fruits are living organisms which are sensitive to temperature in turn related to airflow and heat transfer inside package. In this study, a transient mathematical model considering heat of respiration and evaporation is developed to predict the thermal response of tray‐layered fruits in ventilated packages during forced‐air precooling. Specifically, the heat source is combined with the energy conservation equation and loaded into numerical solution by User Defined Function (UDF). Temperature profiles of three variously distributed circular and oblong vents in three different patterns (spaced, paralleled and crossed stacking) are simulated, separately. The results show that the heat source affects fruit cooling process, and the layered fruit in paralleled stacking pattern tends to be cooled better than others. Furthermore, the results indicate that vertical oblong vent could improve the longitudinal and lateral airflow, while non‐central vent design could greatly improve the overall cooling performance. Definitely a triangular distribution of three circular vents was superior to laterally distributed centre vents with 66.5% higher uniformity and 2.5°C lower of the highest temperature. Compared with the three identical vertical oblong vent conditions, vent design with one hand hole and two side vertical oblong vents can be cooled more uniformly with an increase of 6.5%. It is revealed that vents with large major‐to‐minor axis ratio could be applied to balance airflow and ease cooling differences for a rapid but uniform cooling. Experimental validations were performed for Sim2, Sim4 and Sim6, Sim8, Sim9, and good agreement was obtained considering the five vent conditions with the error less than 3.5°C but coordinated later (within the limits of the experimental uncertainty).Thus the numerical model can be used to predict and optimize temperature distribution within precooling packages. Copyright © 2016 John Wiley & Sons, Ltd.     

Mechanical property enhancement of aligned multi-walled carbon nanotube sheets and composites through press-drawing process

A solid-state drawing and winding process was done to create thin aligned carbon nanotube (CNT) sheets from CNT arrays. However, waviness and poor packing of CNTs in the sheets are two main weaknesses restricting their reinforcing efficiency in composites. This report proposes a simple press-drawing technique to reduce wavy CNTs and to enhance dense packing of CNTs in the sheets. Non-pressed and pressed CNT/epoxy composites were developed using prepreg processing with a vacuum-assisted system. Effects of pressing on the mechanical properties of the aligned CNT sheets and CNT/epoxy composites were examined. Pressing with distributed loads of 147, 221, and 294 N/m showed a substantial increase in the tensile strength and the elastic modulus of the aligned CNT sheets and their composites. The CNT sheets under a press load of 221 N/m exhibited the best mechanical properties found in this study. With a press load of 221 N/m, the pressed CNT sheet and its composite, respectively, enhanced the tensile strength by 139.1 and 141.9%, and the elastic modulus by 489 and 77.6% when compared with non-pressed ones. The pressed CNT/epoxy composites achieved high tensile strength (526.2 MPa) and elastic modulus (100.2 GPa). Results show that press-drawing is an important step to produce superior CNT sheets for development of high-performance CNT composites.