Effects of CF4/O2 gas plasma power/exposure time on dielectric properties and breakdown voltages of PVDF films

Dielectric properties and electrical breakdown strengths were measured on 12-μm-thick poly(vinylidene fluoride) films before and after exposure to various power levels and exposure times in a 96% CF₄/4% O₂ gas plasma. Significant changes in dielectric constant, dielectric losses, and breakdown voltages were observed. Breakdown voltages for PVDF films as a function of exposure time and plasma power appear to go through a maximum. © 1992 John Wiley & Sons, Inc.     

Melamine salts as hardeners for urea formaldehyde resins

Various salts derived from melamine and organic acids were prepared and used as melamine substitutes for melamine urea formaldehyde (MUF) resins. The synthesis of these melamine salts and a detailed characterization of their stoichiometry are described. All salts form 1 : 1 or 1 : 2 stoichiometries in a homogeneous reaction. They crystallize during cooling of the hot and diluted reaction mixture. Both ¹³C–NMR and ¹⁵N–NMR data are reported and point toward the formation of real ionic structures. Most salts have higher water solubility than that of pure melamine and are tested for their ability to substitute melamine in MUF resins. The mechanical and chemical properties of plywood panels made up of traditional MUF resins and mixtures of UF resins with melamine salts are investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1654–1661, 2001     

The influence of processing on the microstructure and the microwave properties of Co-F-codoped barium strontium titanate thick-films

The influence of processing on the microstructure and the dielectric properties of Co-F-codoped Ba_0.6Sr_0.4TiO₃ (BST) thick-films has been investigated. BST powders with different particle sizes were prepared and applied on alumina substrates by screen-printing. The resulting thick-films were sintered at different holding times and characterized with respect to their microstructure and microwave properties. The microstructure of the thick-films shows a clear dependency on sintering time and initial particle size. In addition to grain growth, the formation of a secondary phase is observed at the interface between substrate and BST with increasing sintering time. The dielectric characterization at microwave frequencies shows an increase of tunability with larger grain size while the dielectric loss is even lowered. This shows the strong influence of the microstructure on the material properties and the possibility of tailoring the material through specific processing.     

Minor and Intermediate Components Enhance Attraction of Female Mediterranean Fruit Flies to Natural Male Odor Pheromone and Its Synthetic Major Components

The attraction of virgin female medflies to either the natural pheromonal odor of calling males or its synthetic major components was enhanced by both intermediate and minor pheromonal components in multiple choice discrimination tests. The modification of the standard Gow rotating-trap-array, cage olfactometer to allow a single source of natural pheromonal odor to be delivered equally and simultaneously to a number of traps greatly increased trapping efficacy (64% capture rate) and ability to resolve odor preference discrimination by female flies. In olfactometer cage bioassays, responding female medflies expressed preferences in attraction to male odor augmented with either synthetic intermediate or minor components over male odor alone. In dual-choice flight-tunnel bioassays, the minor blend enhanced the attractiveness of both the natural male odor and its synthetic major components. Moreover, the minor blend, when presented together with the synthetic major components, comprised an artificial pheromonal lure competitive for the first time with the natural male odor in attraction of virgin female medflies.     

Simple approach for the plasma treatment of polymeric membranes and investigation of the aging effect

The modification of the surface characteristics after treatment with plasma in polymeric materials, such as the aging phenomenon, calls the attention of research in the area of nonthermal plasma technology. In this work, a direct treatment with dielectric-barrier discharge plasma was used on the surfaces of ultrafiltration membranes. The measurements of the contact angle with water, attenuated total reflectance accessory, zeta potential, atomic force microscopy and scanning electron microscopy-MEV were performed on the surfaces to verify changes after plasma treatment and to understand the occurrence and timing of the plasma aging effect. In the analysis of the membrane performance, hydraulic permeation and protein retention tests were performed. The results showed an improvement in wettability and hydrophilic properties in the post-treated membranes. The study of reversibility/aging of the post-plasma surface is important for research that deals with the modification of polymeric membranes. Changes in surface morphology, topography and wettability of the membranes were observed up to seven days after treatment, with a tendency to return to the initial characteristics of the membranes.     

Kidney Injury Caused by Preeclamptic Pregnancy Recovers Postpartum in a Transgenic Rat Model

Preeclampsia (PE) is characterized by the onset of hypertension (≥140/90 mmHg) and presence of proteinuria (>300 mg/L/24 h urine) or other maternal organ dysfunctions. During human PE, renal injuries have been observed. Some studies suggest that women with PE diagnosis have an increased risk to develop renal diseases later in life. However, in human studies PE as a single cause of this development cannot be investigated. Here, we aimed to investigate the effect of PE on postpartum renal damage in an established transgenic PE rat model. Female rats harboring the human-angiotensinogen gene develop a preeclamptic phenotype after mating with male rats harboring the human-renin gene, but are normotensive before and after pregnancy. During pregnancy PE rats developed mild tubular and glomerular changes assessed by histologic analysis, increased gene expression of renal damage markers such as kidney injury marker 1 and connective-tissue growth factor, and albuminuria compared to female wild-type rats (WT). However, four weeks postpartum, most PE-related renal pathologies were absent, including albuminuria and elevated biomarker expression. Only mild enlargement of the glomerular tuft could be detected. Overall, the glomerular and tubular function were affected during pregnancy in the transgenic PE rat. However, almost all these pathologies observed during PE recovered postpartum.     

Fabrication of gap-optimized CMUT

A recently introduced set up of capacitive micromachined ultrasonic transducers (cMUT) combines a conductive membrane above a structured sacrificial layer. All previous approaches either require an additional metallic electrode or do not possess a structured sacrificial layer and, consequently, may make exact adjustment of the membrane dimensions difficult. The present set ups are especially suited for the fabrication of cMUT with gap heights ranging between 50 nm and 2 /spl mu/m between the electrodes. Large gaps are a prerequisite to enabling sufficient deflections of the membrane and, therewith, to generating high pressure gradients. On the other hand, small gap sizes are desirable for detecting weak ultrasonic sources. This paper focuses on the fabrication process of cMUT to realize electrode separation above 500 nm and, in addition, on the manufacturing of cMUT with gaps below 500 nm. The successful realization has been proven by some basic experimental investigations. Finally, the fundamental equations of a frequently chosen simulation model are documented, as a number of ambiguities exist in the common literature.