Electrical and stability properties and ultrasonic microscope characterisation of low temperature co-fired ceramics resistors

This paper presents systematic investigations of electrical and stability properties of various low temperature co-fired ceramics (LTCC) resistors. One of the goals of this work was to check the compatibility of LTCC materials (tapes, resistive and conductive inks) from various manufacturers. Three commercially available green tapes and three LTCC resistor/conductor systems were examined. The resistive inks with 1 kΩ/sq. nominal sheet resistance were used. Buried (inside) and surface resistors were laminated and fired according to the tape manufacturers’ recommendations. The influence of dimensional effect on sheet resistance and hot temperature coefficient of resistance, the temperature dependence of resistance in a wide temperature range (from −180°C to +130°C), long-term stability of thermally aged as-fired resistors (150°C, 500 h) and durability to high-voltage micro- or nanosecond pulses (50 ns pulses with 4000 V/mm maximum electric field or 10 μs ones with 700–1000 V/mm electrical field) were carried out for electrical and stability characterisation of LTCC resistors. Non-destructive scanning acoustic microscope diagnostics was applied for structure investigation and estimation of lamination and cofiring process quality of buried LTCC resistors.     

20.1%‐efficient crystalline silicon solar cell with amorphous silicon rear‐surface passivation

We have developed a crystalline silicon solar cell with amorphous silicon (a‐Si:H) rear‐surface passivation based on a simple process. The a‐Si:H layer is deposited at 225°C by plasma‐enhanced chemical vapor deposition. An aluminum grid is evaporated onto the a‐Si:H‐passivated rear. The base contacts are formed by COSIMA (contact formation to a‐Si:H passivated wafers by means of annealing) when subsequently depositing the front silicon nitride layer at 325°C. The a‐Si:H underneath the aluminum fingers dissolves completely within the aluminum and an ohmic contact to the base is formed. This contacting scheme results in a very low contact resistance of 3.5 ±0.2 mΩ cm² on low‐resistivity (0.5 Ω cm) p‐type silicon, which is below that obtained for conventional Al/Si contacts. We achieve an independently confirmed energy conversion efficiency of 20.1% under one‐sun standard testing conditions for a 4 cm² large cell. Measurements of the internal quantum efficiency show an improved rear surface passivation compared with reference cells with a silicon nitride rear passivation. Copyright © 2005 John Wiley & Sons, Ltd.     

Scalable Functionalization of Optical Fibers Using Atomically Thin Semiconductors

Atomically thin transition metal dichalcogenides are highly promising for integrated optoelectronic and photonic systems due to their exciton-driven linear and nonlinear interactions with light. Integrating them into optical fibers yields novel opportunities in optical communication, remote sensing, and all-fiber optoelectronics. However, the scalable and reproducible deposition of high-quality monolayers on optical fibers is a challenge. Here, the chemical vapor deposition of monolayer MoS₂ and WS₂ crystals on the core of microstructured exposed-core optical fibers and their interaction with the fibers’ guided modes are reported. Two distinct application possibilities of 2D-functionalized waveguides to exemplify their potential are demonstrated. First, the excitonic 2D material photoluminescence is simultaneously excited and collected with the fiber modes, opening a novel route to remote sensing. Then it is shown that third-harmonic generation is modified by the highly localized nonlinear polarization of the monolayers, yielding a new avenue to tailor nonlinear optical processes in fibers. It is anticipated that the results may lead to significant advances in optical-fiber-based technologies.     

Complex regulation of granulocyte adhesion to cytokine-activated endothelium

The adhesion of leukocytes to the endothelium is a hallmark in the development of an inflammation. Adhesion is caused by a number of mechanisms that depend upon the activation of the endothelium. The adhesion has to be specific for the different leukocyte types. I review here recent data with respect to polymorphonuclear granulocytes (PMN) adhesion to the endothelium of an inflammatory site. I especially focus on the pivotal role of Interferon gamma in the regulation of PMN adhesion to the endothelium. It modulates the adhesion of PMN caused by activation by other cytokines like IL-1, but does not affect the cell surface expression of the known adhesion molecules. I postulate the existence of a new class of cell surface modulators of adhesion which participate in the multiple step process of cell-cell adhesion.     

Stereokinetic effect and its relation to the kinetic depth effect.

The stereokinetic effect (SKE) has been defined and studied by nested circular patterns rotating on a turntable. Circles must appear not to rotate as they revolve, which in turn results in their appearing to translate relative to one another. A powerful illusion of object depth results even though the individual circles do not undergo an appropriate foreshortening consistent with their apparent changes in slant. It is suggested and tested that the SKE is based on the changing positions between the nested contours despite the absence of any change within each contour, whereas the kinetic depth effect (KDE) entails both kinds of change. It follows that a turntable method of presentation is not necessary, and between-contour transformations can be stimulated by computer animation. Displays consisting of simple translations were shown to evoke robust depth impressions as were patterns consisting of contours of varying shapes. Comparisons of the depth, compellingness, and rigidity of matched SKE and KDE displays are reported. The SKE is taken to be paradigmatic for how the visual system perceives depth when observing small object rotations that occur in everyday situations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Protokollierung in der Praxis

Die in den IT-Komponenten integrierten Protokollierungsfunktionen sind zum Zwecke der Kontrolle und zur Erfüllung der gesetzlichen Vorschriften nur sehr bedingt einsetzbar. Die automatisiert erstellten Protokolle sind h?ufig sehr lückenhaft und wenig aussagekr?ftig. In der Praxis finden die Protokollierungsfunktionen aufgrund fehlender Standards und ihrer unzureichenden Auspr?gung kaum Anwendung. Gleichwohl ist die Protokollierung ein unverzichtbarer Bestandteil der Sicherheitskonzeption. In der Praxis muss man sich derzeit mangels geeigneter Werkzeuge mit einer Kombination aus einer automatisierten und manuellen Protokollierung behelfen. Sie bedarf einer sorgf?ltigen Konzeptionierung.