Raman spectra of high‐density,low‐density,and linear low‐density polyethylene pellets and prediction of their physical properties by multivariate data analysis

Raman spectra have been measured for pellets of five samples of high‐density polyethylene (HDPE), seven samples of low‐density polyethylene (LDPE), and six samples of linear low‐density polyethylene (LLDPE). The obtained Raman spectra have been compared to find out characteristic Raman bands of HDPE, LDPE, and LLDPE. Principal component analysis (PCA) was applied to the Raman spectra in the 1600–650 cm^?1 region after multiplicative scatter correction (MSC) to discriminate the Raman spectra of the three different PE species. They are classified into three groups by a score plot of PCA factor 1 vs. 2. HDPE with high density and high crystallinity gives high scores on the factor 1 axis, while LDPE with low density and low crystallinity yields negative scores on the same axis. It seems that factor 1 reflects the density or crystallinity. A PC weight loadings plot for factor 1 shows six upward peaks corresponding to the bands arising from the crystalline parts or all‐trans ? (CH₂)_n? groups and seven downward peaks ascribed to the bands of the amorphous or anisotropic regions and those arising from the short branches. Partial least‐squares (PLS‐1) regression was applied to the Raman spectra after MSC to propose calibration models that predict the density, crystallinity, and melting points of the polyethylenes. The correlation coefficient was calculated to be 0.9941, 0.9800, and 0.9709 for the density, crystallinity, and melting point, respectively, and their root‐mean‐square error of cross validation (RMSECV) was found to be 0.0015, 3.3707, and 2.3745, respectively. The loadings plot of factor 2 for the prediction of melting point is largely different from those for the prediction of density and crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 443–448, 2002     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

High-temperature gradient HPLC for the separation of polyethylene–polypropylene blends

A high-temperature gradient HPLC method has been developed for the analysis of polyethylene–polypropylene blends. For the first time it was possible to separate these polyolefin blends by a chromatographic technique which is operating at 140 °C. Blends of a commercial polypropylene and a medium molar mass linear polyethylene were separated using a mobile phase of ethylene glycol monobutylether (EGMBE) and 1,2,4-trichlorobenzene (TCB) and silica gel as the stationary phase. With the use of n-decanol as sample solvent, a precipitation–redissolution mechanism for polyethylene (PE) was established while polypropylene (PP) is eluted in size exclusion mode.     

Discovery of Riociguat (BAY 63‐2521): A Potent,Oral Stimulator of Soluble Guanylate Cyclase for the Treatment of Pulmonary Hypertension

Direct stimulation of soluble guanylate cyclase (sGC) represents a promising therapeutic strategy for the treatment of a range of diseases, including the severely disabling pulmonary hypertension (PH). Optimization of the unfavorable DMPK profile of previous sGC stimulators provided riociguat, which is currently being investigated in phase III clinical trials for the oral treatment of PH.

     

The effect of dielectric constant of materials on unipolar diffusion charging of nanoparticles

We investigated the dependence of unipolar diffusion charging of nanoparticles on the dielectric constant of the particle material experimentally. The examined nanoparticles (10–200 nm) cover a wide range of dielectric constant but have almost the same spherical or compact morphology. Measurements of both intrinsic charged fraction and mean charge per particle show very small differences among different materials. The level of the small difference is consistent with the estimation by Fuchs’ [(1963). On the stationary charge distribution on aerosol particles in bipolar ionic atmosphere. Geofisica Pura e Applicata, 56, 185–193] theory.     

Performance evaluation of three optical particle counters with an efficient “multimodal” calibration method

The sizing accuracies of two widely used yet hitherto unevaluated optical particle counters (OPCs—Grimm Model 1.109 and Palas Model WELAS 2100) as well as one high-resolution, non-commercial OPC were evaluated. The measured data were compared to scattering intensity calculations based on Mie theory. Additionally, the counting efficiency for all three counters was measured, as was the influence of coincidence effects for the OPC with the lowest (manufacturer specified) upper concentration limit.Beside the traditional polystyrene latex calibration, a little-known, very fast and precise “multimodal” calibration method was used, which is based on the simultaneous generation of up to eight sharp multiple-charge modes from polydisperse di-ethyl-hexyl-sebacate (DEHS) particles by electrical mobility classification.     

采用新型焊接电弧提高焊接生产的经济效益和焊缝质量

通过在传统的短路过渡电弧和射流过渡电弧的基础上进行创新,发展新型的焊接电弧,可以显著地提高电弧焊接在金属连接中的优越性。两种新的焊接电弧,forceArc~杂志焊接电弧和coldArc~焊接电弧可以在一个焊接电源上实现,对焊接生产具有现实意义。了解和掌握这些新型电弧的工艺特点,可以有效地将其应用到生产中,以此提高焊接产品的质量和焊接生产的经济效益。新型焊接电弧的出现使现有的有关焊前焊接接头准备的标准和规定,特别是有关坡口角度和焊接位置,需要重新考虑。新型焊接电弧可以应用于各种金属加工工业中的焊接生产,是对弧焊工艺的一个创新。     

Application of advanced materials for ship construction – Experiences and problems

Within the paper a short overview is given regarding the application of advanced materials in the shipbuilding world. The trends for application of high‐strength structural steel, aluminium alloys and composites as well as their limits and restrictions are mentioned. Specific attention is paid to material and corrosion problems observed in shipbuilding and ships in service. As main topics the application of high‐tensile strength structural steel for ship structural members, for ballast water tanks and the involved corrosion problems, the fatigue resistance and “undermatch” situation of welded aluminium alloys compared to steel as well as the corrosion of composites, i.e. osmosis, are mentioned. New developments of ships, e.g. high‐speed crafts and wigs, are pointed out. Conclusions for further research and development in the material field are drawn. The importance of the inter‐relationships amongst the improved material properties, design and calculation aspects as well as the fabrication technologies are stated.     

BSA Hydrogel Beads Functionalized with a Specific Aptamer Library for Capturing Pseudomonas aeruginosa in Serum and Blood

Systemic blood stream infections are a major threat to human health and are dramatically increasing worldwide. Pseudomonas aeruginosa is a WHO-alerted multi-resistant pathogen of extreme importance as a cause of sepsis. Septicemia patients have significantly increased survival chances if sepsis is diagnosed in the early stages. Affinity materials can not only represent attractive tools for specific diagnostics of pathogens in the blood but can prospectively also serve as the technical foundation of therapeutic filtration devices. Based on the recently developed aptamers directed against P. aeruginosa, we here present aptamer-functionalized beads for specific binding of this pathogen in blood samples. These aptamer capture beads (ACBs) are manufactured by crosslinking bovine serum albumin (BSA) in an emulsion and subsequent functionalization with the amino-modified aptamers on the bead surface using the thiol- and amino-reactive bispecific crosslinker PEG₄-SPDP. Specific and quantitative binding of P. aeruginosa as the dedicated target of the ACBs was demonstrated in serum and blood. These initial but promising results may open new routes for the development of ACBs as a platform technology for fast and reliable diagnosis of bloodstream infections and, in the long term, blood filtration techniques in the fight against sepsis.