Photodegradation of Selected Aromatic Constituents of Creosote in Organic Solvents

Polycyclic aromatic hydrocarbons (PAHs), naphthalene, phenanthrene, anthracene, and pyrene were irradiated in acetonitrile (CH₃CN) and in dichloromethane (CH₂Cl₂) on individual PAH compounds and in the presence of other compounds. The observed photodegradation of PAHs was dependent on the structure of the compound. Anthracene and pyrene were the most photoreactive in dichloromethane: with total degradation after 0.5 h irradiation for anthracene and 1.5 h for pyrene. The decomposition of PAHs was faster in dichloromethane than in acetonitrile.     

Size-dependent mechanical behavior of nanoscale polymer particles through coarse-grained molecular dynamics simulation

Anisotropic conductive adhesives (ACAs) are promising materials used for producing ultra-thin liquid-crystal displays. Because the mechanical response of polymer particles can have a significant impact in the performance of ACAs, understanding of this apparent size effect is of fundamental importance in the electronics industry. The objective of this research is to use a coarse-grained molecular dynamics model to verify and gain physical insight into the observed size dependence effect in polymer particles. In agreement with experimental studies, the results of this study clearly indicate that there is a strong size effect in spherical polymer particles with diameters approaching the nanometer length scale. The results of the simulations also clearly indicate that the source for the increases in modulus is the increase in relative surface energy for decreasing particle sizes. Finally, the actual contact conditions at the surface of the polymer nanoparticles are shown to be similar to those predicted using Hertz and perfectly plastic contact theory. As ACA thicknesses are reduced in response to reductions in polymer particle size, it is expected that the overall compressive stiffness of the ACA will increase, thus influencing the manufacturing process.     

Biosynthesis and identification of volatiles released by the myxobacterium Stigmatella aurantiaca

The volatiles released by agar plate cultures of two strains of the myxobacterium Stigmatella aurantiaca (strains Sg a15 and DW4/3-1) were collected in a closed-loop stripping apparatus (CLSA) and analyzed by GC-MS. Large numbers of substances from different compound classes (ketones, esters, lactones, terpenes, and sulfur and nitrogen compounds) were identified; several of them are reported from natural sources for the first time. The volatiles 2-methyltridecan-4-one (17), its isomer 3-methyltridecan-4-one (20), and the higher homologue 2-methyltetradecan-4-one (18) were identified in the extracts of both strains and were synthesized. In addition, strain Sg a15 produced 2,12-dimethyltridecan-4-one (19), 2-methyltridec-2-en-4-one (23), and a series of phenyl ketones, among them 1-phenyldecan-1-one (14) and 9-methyl-1-phenyldecan-1-one (16), whereas strain DW4/3-1 emitted traces of 10-methylundecan-2-one (21). The biosynthesis of 14 and 16 was examined in feeding experiments with deuterated precursors carried out on agar plate cultures. The leucine-derived starter unit isovalerate was shown to be incorporated into 16, as was phenylalanine-derived benzoic acid into both 14 and 16. The results point to formation both of the phenyl ketones and of the structurally related aliphatic ketones through an unusual head-to-head coupling between a starter unit such as benzoyl-CoA and a fatty acyl-CoA, followed by decarboxylation.     

Phase Transformation of Mechanically Milled Nano-Sized γ-Alumina

The phase transformation of mechanically milled nano-sized γ-alumina particles was investigated. The structures and phase presentation of the powders before and after milling were characterized using X-ray diffraction, transmission electron microscopy, and photoluminescence measurement. The phase transformation kinetics was investigated using differential scanning calorimetry. It was found that significant amounts of defects were generated by milling. These defects dramatically lowered the temperatures and activation energies of the transformation by promoting the nucleation and diffusion. The accumulation of the defects appears to show a logarithmic dependence of milling time.     

Thermal cure monitoring of phenolic resole resins based on in situ fluorescence technique

The thermal curing reaction of two phenolic resole resins is monitored using the fluorescence technique. The intrinsic fluorescence can be used as an indicator for cure monitoring for the first resole. As the thermal curing proceeds, the intrinsic fluorescence intensity of the resole resin decreases and exhibits a few nanometers of redshift. The fluorescence intensity of the emission maxima is correlated with the conversion measured by differential scanning spectroscopy. A linear correlation is found at three different temperatures. The intrinsic fluorescence cannot always be used for monitoring the curing process of phenolic resole resins. Thus, three intramolecular charge transfer compounds and two organic donor–π‐acceptor salts are selected and applied for the cure monitoring of the second phenolic resole resin. As the curing reaction proceeds, the fluorescence emission spectra of the probes exhibit a blue spectral shift and the intensity changes because of environmental changes. An intensity ratio method is applied in which the ratios of the low‐ to high‐intensity changes in the emission bands are used to determine the degree of the curing process. There is a smooth correlation between the intensity ratio method and the degree of cure. The method enables one to follow the changes in the polymer structure at low and intermediate degrees of the curing process (below 70%) and obtain comparable results from different types of probes during the same curing process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1773–1780, 2002     

Phototemtide A,a Cyclic Lipopeptide Heterologously Expressed from Photorhabdus temperata Meg1, Shows Selective Antiprotozoal Activity

A new cyclic lipopeptide, phototemtide A ( 1 ), was isolated from Escherichia coli expressing the biosynthetic gene cluster pttABC from Photorhabdus temperata Meg1. The structure of 1 was elucidated by HR-ESI-MS and NMR experiments. The absolute configurations of amino acids and 3-hydroxyoctanoic acid in 1 were determined by using the advanced Marfey's method and comparison after total synthesis of 1 , respectively. Additionally, three new minor derivatives, phototemtides B–D ( 2 – 4 ), were identified by detailed HPLC–MS analysis. Phototemtide A ( 1 ) showed weak antiprotozoal activity against Plasmodium falciparum, with an IC₅₀ value of 9.8 μm . The biosynthesis of phototemtides A–D ( 1 – 4 ) was also proposed.     

Nonribosomal Peptides Produced by Minimal and Engineered Synthetases with Terminal Reductase Domains

Nonribosomal peptide synthetases (NRPSs) use terminal reductase domains for 2-electron reduction of the enzyme-bound thioester releasing the generated peptides as C-terminal aldehydes. Herein, we reveal the biosynthesis of a pyrazine that originates from an aldehyde-generating minimal NRPS termed ATRed in entomopathogenic Xenorhabdus indica. Reductase domains were also investigated in terms of NRPS engineering and, although no general applicable approach was deduced, we show that they can indeed be used for the production of similar natural and unnatural pyrazinones.