Electronic Meeting Support for Councils

City councils hold meetings several times a week. There is a need for computer support at certain meetings. This paper examines the potential for group support systems for use in city council meetings and shows in what ways they can be helpful in pre-meeting and post-meeting activities. The study is based on 17 computer-supported city council meetings, carried out in Stuttgart, Kornwestheim and other cities as part of the Cuparla Project between 1996 and 1998. Three of these meetings are described in the paper as brief case studies. Following this, all 17 meeting sequences are evaluated and analysed. Guidelines have been developed from the results of the study for the introduction of group support systems in city council meetings.     

Coatings of indium tin oxide nanoparticles on various flexible polymer substrates: Influence of surface topography and oscillatory bending on electrical properties

Abstract— Coatings of indium tin oxide (ITO) nanoparticles on different flexible polymer substrates were investigated with respect to the achievable sheet resistance and their electrical behavior under oscillatory bending. As substrate materials, polyethyleneterephthalate (PET), polyethylenenaphthalate (PEN), polyetheretherketone (PEEK), and polyimide (PI) were chosen, the surface resistances on the different polymer substrates were compared as a function of annealing temperature and surface topography. The surface topography, which has a strong influence on the surface resistance, was characterized by means of a white‐light confocal (WL‐CF) microscope. On the PET substrate, which exhibits the smoothest surface, the coating of ITO nanoparticles shows the lowest sheet resistance of 2 kΩ/□ for a layer thickness of 3 μm and an annealing temperature of 200°C. Furthermore, the electrical behavior of coatings of ITO nanoparticles under oscillatory bending was investigated using a special device. These coatings show a cyclic change of the conductivity which can be explained by an alternating compression and extension of crack flanks under the applied stress. Due to the growing number of cracks with increasing number of cycles, a decrease of the conductivity is observed in the bent state as well as in the balanced state. For a small bending radii, the decrease of the conductivity is stronger due to more cracks caused by the higher tensile stresses in the layer. The electrical behavior of the coatings of the annealed ITO nanoparticles on PET films under oscillatory bending was compared with commercially available sputtered ITO coatings. The annealed coatings of ITO nanoparticles demonstrate better electrical properties under oscillatory bending than coatings of sputtered ITO. The different electrical behavior under oscillatory bending can be related to differences in crack formation.     

An approach to quality engineering of TTCN-3 test specifications

Experience with the development and maintenance of large test suites specified using the Testing and Test Control Notation (TTCN-3) has shown that it is difficult to construct tests that are concise with respect to quality aspects such as maintainability or usability. The ISO/IEC standard 9126 defines a general software quality model that substantiates the term “quality” with characteristics and subcharacteristics. The domain of test specifications, however, requires an adaption of this general model. To apply it to specific languages such as TTCN-3, it needs to be instantiated. In this paper, we present an instantiation of this model as well as an approach to assess and improve test specifications. The assessment is based on metrics and the identification of code smells. The quality improvement is based on refactoring. Example measurements using our TTCN-3 tool TRex demonstrate how this procedure is applied in practise. B. Zeiss is supported by a Ph.D. scholarship from Siemens AG, Corporate Technology.     

ISSE 2008, 07. bis 09. Oktober 2008 in Madrid

Ohne Zusammenfassung     

Crystallographic and morphological characteristics of oxidation growth pits in wustite grown at 1200 °C

In situ oxidation of polycrystalline iron at 1200 °C and atm has revealed symmetrical square growth pits in the wustite scale. The pit walls are nominally oriented with the {110} planes of the wustite lattice but are dissociated into macro- and microledges consisting of {100}-type planes. Such growth pits intrude into the wustite scale at the gas/oxide interface, and at the oxide/metal interface small oxide nodules intrude into the metal. After sufficiently long oxidation times at 1200 °C, rate control should shift from oxidant arrival to cation volume diffusion, and pits are then destabilized and a planar morphology is achieved.     

Fast Minor Testing in Planar Graphs

Minor Containment is a fundamental problem in Algorithmic Graph Theory used as a subroutine in numerous graph algorithms. A model of a graph H in a graph G is a set of disjoint connected subgraphs of G indexed by the vertices of H, such that if {u,v} is an edge of H, then there is an edge of G between components C _u and C _v . A graph H is a minor of G if G contains a model of H as a subgraph. We give an algorithm that, given a planar n-vertex graph G and an h-vertex graph H, either finds in time $\mathcal{O}(2^{\mathcal{O}(h)} \cdot n +n^{2}\cdot\log n)$ a model of H in G, or correctly concludes that G does not contain H as a minor. Our algorithm is the first single-exponential algorithm for this problem and improves all previous minor testing algorithms in planar graphs. Our technique is based on a novel approach called partially embedded dynamic programming.     

Physiological cost of energy-equivalent noise exposures with a rating level of 85 dB(A):: Hearing threshold shifts associated with energetically negligible continuous and impulse noise

In industry continuous or impulse noise does not occur exclusively; rather it is a combination of both. If low-level continuous noise or impulse noise (below 120 dB) is added to an already existing high-level continuous noise this often numerically causes no essential increase in the rating level. Yet, it cannot be expected that also aural strain of these exposures is always negligible. Therefore, in a cross-over test series, ten male subjects (Ss) were exposed to white noise of 94 dB(A) for 1 h (TS I), energy-equivalent to an 8 h-rating level L_Ard of 85 dB(A). In a second test series (TS II) the same exposure was combined with 900 energetically negligible 5-ms impulses with a noise level of 113 dB(A) which increased the rating level by only 0.4 dB. The noise exposure of TS I and TS II was followed by an idealized resting phase in a soundproof cabin. In a third test series (TS III) the continuous noise of 94 dB(A) / 1 h was followed by 3 h of white noise at 70 dB(A). Such an additional load increases the L_Ard by merely 0.1 dB to 85.1 dB(A). In all three test series, the noise-induced temporary threshold shift (TTS₂) and its restitution were measured. The continuous noise exposure of 94 dB(A) for 1 h was associated with a TTS₂ of around 20 dB which disappeared completely after about 2 h. The additional impulse noise caused a small increase in the TTS₂ and a prolongation of the restitution time. The maximum mean temporary threshold shift for the group increased only slightly (from 22.5 to 25.9 dB, which nevertheless can be statistically proven at a significance level of p 0.99). Yet, more importantly, the restitution time increased from 126 to 175 min, i. e. 3 h, which can be statistically proven at a significance level of p0.95. The TTS₂-values of TS III did not differ significantly from those resulting from TS I. That was expected as the conditions up to that point in time were identical. But due to the additional subsequent exposure, the mean restitution time increased considerably from 126 min up to 240 min (4 h). The mean total physiological cost represented by the integrated restitution temporary threshold shift (IRTTS) increased in TS II by approximately 40% and in TS III even by 140%.

Relevance to industry

The results of the study show that levels of noise which have no influence on the rating level which traditionally is calculated according to the energy-equivalence principle are often of great importance, as they can lead to considerably prolonged restitution times. Therefore, the purely energy-equivalent determination of the rating level of both impulse noise and low sound levels can lead to an underestimation of latent problems so that over time a reversible TTS can evolve into a permanent threshold shift. The results are also of importance for the acoustic design of break rooms for noise-exposed workers. There should be conditions that allow an undisturbed restitution of hearing.