Theoretical Investigation of Metal Cladding for Nanowire and Cylindrical Micropost Lasers

We investigate the transverse modal properties of cylindrical subwavelength metal-clad nanowire and micropost lasers via rigorous theoretical waveguide analysis, including the effects of finite thickness metal cladding and gain in the core. The results of this analysis show that air-metal surface guided TM₀₁ and some hybrid surface guided modes suffer less loss but are less confined to the core, while core-metal surface guided modes are better confined to the core but suffer greater loss. An increase in the thickness of the metal cladding reduces the loss of the core-metal surface guided modes. The modal gain and confinement of the metal-clad cavity are compared to an unclad cavity.     

Computer aided kinetic modeling with KMT and KME

The complexity of many chemical and refining reaction systems and the thus-derived tedious and time-consuming process of building the associated kinetic models have been major obstacles in the use of fundamental kinetics in the solution of chemical engineering problems. This review summarizes work aimed at removing theses obstacles. Our recent work that has led to the enhancement of the Kinetic Modeler's Toolbox (KMT) and the development of the Kinetic Model Editor (KME) presents an end-to-end solution to the kinetic modeling process, including automated feedstock modeling, reaction network construction, kinetic rate estimation, model programming, process system configurations, model customizations, compilations, model execution and results analysis.     

Factors affecting contrasting results between self-reported and performance-based levels of physical limitation

Molecular electrostatic potential (MEP) maps of certain 3-methoxy flavone derivatives having different anti-picornavirus activities have been studied. Geometries of the molecules were optimised and charge distributions computed using the AM1 molecular orbital method. Hybridization displacement charges (HDC) were combined with the L?wdin charge distributions to compute the MEP maps. Reliability of the method of computing MEP maps was tested by studying certain other molecules for which ab initio MEP results are available. The anti-picornavirus activities of the flavones have been shown to be related with negative MEP values in two regions, one near the 3-methoxy group and another in a diagonally opposite region near the substituent attached to the C7 atom of the molecules.     

An expert decision support system for network routing: a case study

The paper presents a case study of the development of an expert decision support system which uses simple heuristic methods for fast determination of routes for simultaneous signals in a transmission network of limited capacity. It illustrates how heuristic solutions can be embodied in a model-based DSS and how the standard decision support literature, although intuitively appealing, provides little practical assistance in system construction or classification     

Fast algorithms for single frequency estimation

In this paper, some new estimators of the frequency of a single complex sinusoid are presented. The rotate-add-decimate (RAD) method of Crozier is first refined to more closely approach the Cramer-Rao Bound (CRB). An additional modification yields an unbiased estimator (ERAD) that essentially achieves the CRB above a signal-to-noise ratio (SNR) threshold comparable to that of RAD. In addition, this estimator is proven to achieve the CRB for high SNR. The ERAD method requires approximately 2N complex multiply-adds and log/sub 2/N arctangents. A modified ERAD (MERAD) is proposed that matches the SNR threshold and computational complexity of the RAD method (approximately 3N complex multiply-adds and log/sub 2/N arctangents) but achieves the CRB for high SNR.     

MODELING LIGNIN LIQUEFACTION 1. CATALYTIC HYDROPROCESSING OF LIGNIN-RELATED METHOXYPHENOLS AND INTERAROMATIC UNIT LINKAGES

The reactions of two sets of lignin model compounds over a sulfided CoOMoO3/γ-Al2O3 catalyst were studied. The first set mimicked lignin methoxyphenol residues and comprised 4-methyl-guaiacol, 4-methyl catechol, eugenol and vanillin. Deoxygenation and hydrogenation were facile and led to ultimate molar yields of single-ring products as high as 0.70. The selectivity to single-ring products increased with increases in temperature, o-hydroxydiphenylmethane, phenyl ether and o,o'-biphenol constituted the second set that mimicked thermally stable lignin bonds.Fragmentation of o-hydroxydiphenylmethane and phenyl ether occurred readily; o,o'-biphenol reacted to dibenzofuran.

These results suggest that the single-ring products obtained from catalytic liquefaction of lignins should be more desirable than those obtained from pyrolysis because of both higher yields and reduced complexity.     

IL-1 beta and TNF alpha modulate delta 9-tetrahydrocannabinol-induced catalepsy in mice

The role of the proinflammatory cytokines interleukin-1 alpha (IL-1 alpha), interleukin-1 beta (IL-1 beta), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF alpha) in THC-induced catalepsy in mice was examined. Recombinant IL-1 beta (400 ng/mouse, IV) and TNF alpha (500 ng/mouse, IV) were effective in potentiating the cataleptic effect of low-dose THC (10 micrograms/mouse, IV). Recombinant IL-1 alpha and IL-6 did not potentiate catalepsy at any dose tested. Anti-IL-1 beta and anti-TNF alpha antibodies were effective in attenuating high-dose (75 micrograms/mouse) THC-induced catalepsy. Antibodies to IL-1 alpha and IL-6 had no effect on catalepsy. Early onset catalepsy (10 min postinjection) was potentiated by exogenous recombinant IL-1 beta and TNF alpha but only later catalepsy (2 h postinjection) was attenuated by antibodies to endogenous IL-1 beta or TNF alpha. This divergence of the cytokine effect suggests that these substances regulate, by different mechanisms, the early and late THC-induced cataleptic response.     

Catalytic oxidation of hydrogen sulphide on activated carbons

Activated carbon is a suitable adsorbent for removal of hydrogen sulphide from natural, synthesis or other product gases. The process depends predominantly on physical adsorption, though catalytic oxidation is also involved. During catalytic oxidation the H₂S is converted in the presence of oxygen to elemental sulphur, which is adsorbed onto the internal surface of the activated carbon, thus leading to a sulphur load of up to 120% by weight. The oxidation rate depends on the partial pressure of both reactants, H₂S and O₂ and is largely controlled by the characteristics of the activated carbon. The activity of the catalyst can be improved by impregnating the activated carbon with promoters such as iron and iodine. The regeneration of spent carbon is currently carried out using hot gas desorption methods at temperatures around 450 °C.     

Sulfonated latex particle as acid catalysts for the continuous inversion of sucrose

Sulfonated polystyrene latex particles were used as acid catalysts in the continuous inversion of sucrose at 50–70°C. The particles (surface charge 168 μeq/g) were confined in a stirred reactor with a semipermeable membrane; sucrose solution was pumped in, and product solution was pumped out. The catalytic activity of the particles was unchanged after 20 days continuous use. Variation of particle size (0.13 and 0.42 μm) and stirring rate showed that internal and external mass transfer was not a controlling factor. The kinetics were pseudo-first-order; the rate constant at 70°C was 2.30/N min as compared with 0.07/N min for macroporous sulfonated ion-exchange resin; the apparent activation energy was 111 kJ/mol as compared with 121 kJ/mol for the homogeneous acid-catalyzed reaction. The faster rate was attributed to the very great surface area, high charge density, and lack of internal diffusional resistance of the latex particles. The proposed mechanism comprised adsorption of sucrose on the particle surface, followed by inversion and desorption of product.