采用单独碳化室压力调节系统减少焦炉排放

PROven(R)系统的开发为了减少焦炉的排放,过去已进行了多种技术的开发.但是从焦炉炉门、装料孔边缘等处逸散物的减少,已受到工艺技术的制约.一个基本的制约因素是,在集气总管内的压力和联接到总管的所有碳化室内的压力之间有着密不可分的关系.     

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

A socially aware caching mechanism for encounter networks

Managing community content in mobile communities is challenging, since informal groups may emerge spontaneously whenever opportunities exist. To deal with group dynamics, encounter based community support systems can be a solution. In encounter networks, peers exchange content whenever they physically meet, i.e., whenever peers are near to each other. To assure content availability within the community network, content needs to be replicated (cached) and continuously updated. A?well known drawback of this scheme is the fact that the resource usage can be quite high. In this paper we present new caching strategies based on sociological knowledge, aiming at improving the overall content quality. We derive mobility and connectivity aware cache policies and simulate their benefit for knowledge building with urban life simulations. Results show that context precision and recall can be greatly improved in comparison to traditional cache strategies applied in the majority of encounter networks.     

Polymorph Switching of Calcium Carbonate Crystals by Polymer‐Controlled Crystallization

Polymer‐controlled crystallization of calcium carbonate crystals in solution by a gas diffusion method has been carried out in the presence of poly(sodium 4‐styrene sulfonate‐co‐N‐isopropylacrylamide) (PSS‐co‐PNIPAAM), and for the first time all three anhydrous polymorphs, calcite, vaterite, and aragonite could be selectively produced with a single additive. The selective polymorph synthesis can be nicely adjusted simply by concentration variations of polymer and calcium ions in the present reaction system. The simplicity of the system reveals the influence of Ca²⁺ and polymer concentration on the nucleation and crystal growth of CaCO₃ via the balance between thermodynamic and kinetic reaction control. A single mechanistic framework employing particle mediated as well as ion mediated crystallization for polymorph control is proposed.     

The global socioeconomic energetic metabolism as a sustainability problem

This paper discusses sustainability problems related to socioeconomic energy flows based upon the societal metabolism approach. Contrary to conventional energy statistics that only include energy used in technical devices, this approach considers all kinds of energy flows related to human societies, including nutritional energy flows of humans and domesticated animals. Based upon human population data and data on the pro capite energy metabolism of hunter-gatherers and agricultural societies as well as on statistical data on industrial energy flows a time series of the global socioeconomic energetic metabolism for the last 10⁶ years and a scenario for the next 50 years is derived. These estimates show that the total energy input of mankind has risen by several orders of magnitude since the Neolithic revolution about 10,000 years ago. Whereas the energy input of agricultural societies prior to the advent of industrial societies about 200–300 years ago did not exceed 5% of global terrestrial net primary productivity (NPP), humanity's energy input currently amounts to about 30% of global terrestrial NPP and is likely to surpass 50% in about 2050. This shows that the sheer magnitude of human-induced flows is historically unprecedented and poses at least two closely interrelated sustainability challenges: (1) a reduction of energy available to ecosystem processes that can be assessed using the concept of ‘human appropriation of net primary productivity’ and (2) the changes in the global carbon cycle resulting from land-use change and fossil-energy combustion.     

Statistical multiplexing gain for variable bit rate video codecs in ATM networks

Asynchronous transfer mode (ATM) broadband networks will support variable bit rate video codecs, which are capable of maintaining a constant picture quality. To demonstrate this capability, a prototype hardware video coder has been developed in the Siemens Central Communications Laboratories. The prototype uses interframe coding, combined with a discrete cosine transform, and is able to reproduce the original picture quality, independent of signal sources or picture material used. A gain in transmission efficiency is expected when several video sources share a common ATM channel (‘statistical multiplexing’). This paper reports on a series of measurements that have been performed using this coder for a large variety of video sources to determine the possible gain in transmission efficiency. The main results are: for realistic video phone scenes, up to about three times the number of signals can be transmitted compared to transmision with constant rate and the same picture quality, if the output signal of the coder has been smoothed over a period of one frame. Smoothing over shorter periods reduces the potential gain substantially. The statistical multiplexing gain increases with the duration of the picture sequences due to the criterion of constant picture quality. It varies very little with the acceptable packet loss rate.     

Microstructure-Mechanical Property Relationships in Hot Isostatically Pressed Alumina and Zirconia-Toughened Alumina

The rates of densification and the mechanical properties of pure Al₂O₃ and ZrO₂-toughened Al₂O₃ (ZTA) have been investigated as a function of the temperatures and time schedules used for hot isostatic pressing (HIP) as a postsintering heat treatment for samples which had already been pressureless sintered in air at 1460°C for 45 min. ZTA hot isostatically presed at 1400°C had a finer grain size and a narrower grain size distribution than ZTA hot isostatically pressed at 1600°C. At both HIP conditions, the density which could be obtained was almost the maximum theoretical density. The amount of grinding-induced and fracture-induced monoclinic ZrO₂ formed as a result of the tetragonal → monoclinic martensitic transformation in ZTA was higher in the samples hot isostatically pressed at 1400°C. ZTA hot isostatically pressed at 1600°C and 100 MPa had fewer flaws and higher strengths than ZTA hot isostatically pressed at 1400°C for the same time, with a gradual improvement in mechanical properties with increasing HIP time at each of these two temperatures. The best mechanical properties were obtained from ZTA hot isostatically pressed at 100 MPa and 1600°C for 1 h: these specimens had a four-point bend strength of 940 ± 15 MPa at room temperature and 540 ± 15 MPa at 1000°C and an indentation fracture toughness at room temperature of 9.4 ± 0.2 MPa·m^1/2.     

Classification of rheumatoid joint inflammation based on laser imaging

We describe a classification system for a novel imaging method for arthritic finger joints. The basis of this system is a laser imaging technique which is sensitive to the optical characteristics of finger joint tissue. From the laser images acquired at baseline and follow-up, finger joints can automatically be classified according to whether the inflammatory status has improved or worsened. To perform the classification task, various linear and kernel-based systems were implemented and their performances were compared. Based on the results presented in this paper, we conclude that the laser-based imaging permits a reliable classification of pathological finger joints, making it a sensitive method for detecting arthritic changes.