P2P流媒体中的数据分配算法

最近兴起的P2P技术在充分利用客户资源、提高系统的可伸缩性方面具有巨大的潜力,基于P2P提供视频服务已成为Internet的一项重要应用.在多对单P2P模式下,对多个发送端最优地分配发送速率和数据是一个难题.为此,提出了一种新的分配算法.首先,应用排队论把最优速率分配问题模型化为非线性最优化问题,推导出求解最优化问题的速率分配公式;然后,基于该公式提出最优速率分配算法(ORAA),并对ORAA输出解的最优性给出证明;最后,提出动态速率分配算法(DRAA).DRAA对动态的网络环境具有自适应性,能根据网络条件的变化最优地为多个发送端进行速率和数据分配.仿真实验结果表明,在不同的参数条件下,DRAA算法减少了计算和通信开销,比同类算法有更好的性能.     

一种基于接口匹配的组合Web服务描述语言

从基于WSDL的服务接口描述语言入手,分析了Web服务组合的类型和消息依赖关系.将服务组合分为顺序组合、替换组合、混合式组合三种类型;结合这些类型,将组合服务中的消息依赖定义为消息映射依赖、消息合成依赖和消息分解依赖三种关系.在此基础上,提出了一种轻量级的组合服务描述语言(CWSDL).     

基于角色扩展的RBAC模型

针对基于角色的访问控制(RBAC)模型在模拟复杂组织结构和权限继承关系方面的不足,提出了基于角色扩展的RBAC模型——MR-RBAC。该模型在角色集和权限集之间引入了最小角色集,并形式化定义了模型的基本集合和相关函数。同时还深入研究了扩展模型中的角色权限类型与角色关系,给出了最小角色的概念以及其生成算法。分析表明,MR-RBAC模型改善了传统模型的角色层次结构和权限继承关系,具有授权粒度细、可伸缩性、可扩展性、安全等优点。最后模型性能测试表明原型系统在引入最小角色划分后对于系统时间性能的影响不大。     

Estimating clear-sky land surface longwave upwelling radiation from MODIS data using a hybrid method

Surface longwave upwelling radiation (LWUP) is one of the four components for calculating the earth’s surface radiation budget. Under the general framework of the hybrid method, we developed linear models for estimating the global 1-km instantaneous clear-sky LWUP from the top-of-atmosphere (TOA) radiance of the Moderate Resolution Imaging Spectroradiometer (MODIS) thermal infrared channels 29, 31, and 32. Extensive radiative transfer simulations were conducted to produce a large number of representative samples, from which the linear model was derived. The derived hybrid model was first evaluated using ground measurements collected at 15 sites from two networks (SURFRAD and ASRCOP). According to the validation results, the average bias and root mean square error (RMSE) of ?0.55 and 15.76 W m^?2, respectively, were obtained by averaging the mean bias and RMSE for the two networks. Compared to a hybrid method developed by a previous study and the temperature-emissivity method, our linear model had a superior performance.     

The simulation and visual test contact process of a MEMS inertial switch with flexible electrodes

A MEMS inertial switch with flexible electrodes to contact-enhanced is designed and fabricated. ANSYS software is used to simulate the displacement of the mass, deformation of the flexible electrode and contact time of the switch. A high-speed video measurement has been used to visualize the switch contact process instead of electrical measurement for a deeper understanding of the dynamic contact process, and these images are used to visually validate simulation results. Comparisons between the simulation and image results are discussed. The image results are seen to be in good agreement with the dynamics simulation results.     

Robust State Estimation for Delayed Complex-Valued Neural Networks

This paper is concerned with the state estimation problem for the uncertain complex-valued neural networks with time delays. The parameter uncertainties are assumed to be norm-bounded. Through available output measurements containing nonlinear Lipschitz-like terms, we aim to design a state estimator to estimate the complex-valued network such that, for all admissible parameter uncertainties and time delay, the dynamics of the error-state system is guaranteed to be globally asymptotically stable. In addition, the case that there are no parameter uncertainties is also considered. By utilizing the Lyapunov functional method and matrix inequality techniques, some sufficient delay-dependent criteria are derived to assure the existence of the desired estimator gains. Finally, two numerical examples with simulations are presented to demonstrate the effectiveness of the proposed estimation schemes.     

COS和H_2S毒化F-T合成催化剂热力学分析

利用热力学基础数据和相关软件对F-T合成催化剂COS和H_2S中毒的热力学进行了计算。在热力学上,Ru、Fe、Co的COS中毒在F-T合成反应可以发生的条件下均是自发过程。F-T合成反应体系中10~(-9)级的COS即可使Ru基催化剂中的金属Ru生成RuS_2而中毒。Fe和Co毒化后生成的硫化物种类较多,对这些反应的热力学计算结果表明,对于不同的反应,其平衡常数的差异很大,对应中毒反应发生时,所需的COS和H_2S的浓度也不同,对COS的要求更为严格。由于Fe基F-T合成催化剂活性相的复杂性,利用对催化剂相关性质的修饰开发具有一定抗硫性的铁基F-T合成催化剂是可行的;对于Co催化剂,利用F-T合成的反应特点和催化剂改性开发具有一定抗硫性催化剂是可能的。     

基于二总线结构的监测系统设计

介绍了二总线通信基本原理,并给出了基于二总线结构的监测系统的构成。该监测系统已在军事领域中得到应用。     

火力发电机组计算机监控系统高可靠性的设计

介绍了火力发电机组计算机监控系统的网络结构、软硬件设计思想及其具体实现方法。     

基于线段与线段求交的矩形窗口裁剪算法

我们首先对线段是否完全可见进行判定 ,然后对被裁剪线段与矩形窗口四边所在的线段是否相交进行判定并求交。若交点存在则用替换法替换相应的点 ,最后连接被替换后的点得到被裁剪后的线段 ;若交点不存在则线段完全不可见 ,线段将被完全裁剪掉。