TiO2 coating of high surface area silica gel by chemical vapor deposition of TiCl4 in a fluidized-bed reactor

TiO2 was deposited on high surface area porous silica gel (400 m2g(-1)) in a fluidized bed reactor. Chemical vapor deposition was employed for the coating under vacuum conditions with TiCl4 as precursor. Nitrogen physisorption, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and UV-vis spectroscopy were applied to characterize the obtained TiO2-SiO2 composites with different Ti loadings up to 5 wt%. Only a slight decrease in the specific surface area was detected at low Ti loadings. At a Ti loading of 2 wt%, TiO2 was found to be highly dispersed on the SiO2 surface likely in form of a thin film. At higher Ti loadings, two weak reflections corresponding to anatase TiO2 were observed in the diffraction patterns indicating the presence of crystalline bulk TiO2. High resolution XPS clearly distinguished two types of Ti species, i.e., Ti-O-Si at the interface and Ti-O-Ti in bulk TiO2. The presence of polymeric TiOx species at low Ti loadings was confirmed by a blue shift in the UV-vis spectra as compared to bulk TiO2. All these results point to a strong interaction between the TiO2 deposit and the porous SiO2 substrate especially at low Ti loadings.     

Questionnaire Design: Carry‐Over Effects of Overall Acceptance Question Placement and Pre‐evaluation Instructions on Overall Acceptance Scores in Central Location Tests

Question placement and usage of pre‐evaluation instructions (PEI) in questionnaires for food sensory analysis may bias consumers’ scores via carry‐over effects. Data from consumer sensory panels previously conducted at a central location, spanning 11 years and covering a broad range of food product categories, were compiled. Overall acceptance (OA) question placement was studied with categories designated as first (the first evaluation question following demographic questions), after nongustation questions (immediately following questions that do not require panelists to taste the product), and later (following all other hedonic and just‐about‐right [JAR] questions, but occasionally before ranking, open‐ended comments, and/or intent to purchase questions). Each panel was categorized as having or not having PEI in the questionnaire; PEI are instructions that appear immediately before the first evaluation question and show panelists all attributes they will evaluate before receiving test samples. Postpanel surveys were administered regarding the self‐reported effect of PEI on panelists’ evaluation experience. OA scores were analyzed and compared (1) between OA question placement categories and (2) between panels with and without PEI. For most product categories, OA scores tended to be lower when asked later in the questionnaire, suggesting evidence of a carry‐over effect. Usage of PEI increased OA scores by 0.10 of a 9‐point hedonic scale point, which is not practically significant. Postpanel survey data showed that presence of PEI typically improved the panelists’ experience. Using PEI does not appear to introduce a meaningful carry‐over effect.     

Autoproteolytic fragments are intermediates in the oligomerization/aggregation of the Parkinson's disease protein alpha-synuclein as revealed by ion mobility mass spectrometry

Gas-phase protein separation by ion mobility: With its ability to separate the Parkinson's disease protein α-synuclein and its autoproteolytic products-despite the small concentrations of the latter-ion-mobility MS has enabled the characterization of intermediate fragments in in vitro oligomerization-aggregation. In particular, a possible key fragment, the highly aggregating C-terminal fragment, αSyn(72-140), has been revealed.     

Influence of ageing on the dynamic behaviour and the electrochemical characteristics of a 500 We PEMFC stack

In this study, a 500 We 19 cells Proton exchange membrane fuel cell (PEMFC) stack was aged for ∼1200 h and submitted to current steps between different operating levels. Using two different multi-channel data acquisition systems (one at 100 kHz and one at 1 Hz). the evolution with ageing of individual cells and full stack's short term (∼10 s) and medium term (∼4 min) dynamic performances was followed. Undershoots and overshoots behaviours were observed for respective current step-up and step-down. It appeared that, in studied operating conditions, the first time constant was related to the charge transfer at electrode/electrolyte interfaces. After the first “plateau”, the voltage evolution was explained by a membrane water content evolution.     

Energy yield prediction errors and uncertainties of different photovoltaic models

Mathematical, empirical, and electrical models have long been implemented and used to predict the energy yield of many photovoltaic (PV) technologies. The purpose of this paper is to compare the annual DC energy yield prediction errors of four models namely the single‐point efficiency, single‐point efficiency with temperature correction, the Photovoltaic for Utility‐Scale Applications (PVUSA), and the one‐diode model, against outdoor measurements for different grid‐connected PV systems in Cyprus over a 4‐year evaluation period. The different models showed a wide variation of prediction errors, demonstrating a strong dependence between model performance and the different technologies. In particular, it was clearly shown that the application of temperature loss correction based on the manufacturer's temperature coefficients of power at maximum power point assisted in improving the energy yield prediction significantly especially for the crystalline silicon (c‐Si) technologies. In most cases, the best agreement between the modeled results and outdoor‐measured annual DC energy yield for mono‐crystalline silicon (mono‐c‐Si) and multi‐crystalline silicon (multi‐c‐Si) technologies was obtained using the one‐diode model. The energy yield for the thin‐film technologies was more accurately predicted using the PVUSA model with the exception of the copper‐indium‐gallium‐diselenide (CIGS) technology, which was best predicted using the single‐point efficiency with temperature correction and one‐diode models, thus demonstrating similar physical properties to c‐Si technologies. The paper further quantifies the combined uncertainties associated with the predicted energy yield as a function of the input parameters for the single‐point efficiency, single‐point efficiency with temperature correction, and the PVUSA models. Copyright © 2011 John Wiley & Sons, Ltd.     

Potential of photovoltaic systems in countries with high solar irradiation

Renewable energy sources derived principally from solar energy have been gaining ground over the last few years and are now beginning to contribute to the global energy mix. Solar energy in the form of direct electricity conversion (photovoltaics) is already very popular in countries such as the United States, Germany and Japan. The enormous potential of photovoltaic (PV) technology is also obvious and favourable in countries with high irradiation such as the Mediterranean region. The objective of this paper is to review the different up and coming PV technologies, to explore the potential of different PV systems in countries with high solar irradiation and to compare their performance through the assessment of thirteen different types of PV systems that have been installed side by side in Nicosia, Cyprus and Stuttgart, Germany. Finally useful insight into the performance of the PV systems as a function of the meteorological conditions and location will be highlighted.     

Schrifttumsberichte

Ohne Zusammenfassung     

Buchbesprechungen

Ohne Zusammenfassung