Mapping standards for home networking

In this study, we apply a step-by-step approach for the identification of standards for home networking. We develop a classification and we use this classification to categorize sixty-four (sets of) standards. By developing this categorization, we have brought order to the chaos of home networking standards.     

Evaluation of the effect of a paver’s trolley on productivity, task demands, workload and local discomfort

The objective of this study was to determine the differences in the number of paving stones laid (productivity), task demands, energetic workload, body region discomfort and preference when laying paving stones with or without use of a paver’s trolley (n = 8) in a within-subject controlled study of pavers. The number of paving stones laid and the task demands were measured by means of systematic observations at the workplace. The energetic workload was determined using the percentage of heart rate reserve (%HRR). Body region discomfort was measured using visual analog scales, and the workers’ preference was ascertained via interview. The use of a paver’s trolley had no effect on productivity, %HRR or body region discomfort compared to working without a paver’s trolley. The duration of knee-straining activities did not differ between working with (141 min) and without (146 min) the paver’s trolley. However, six of the eight pavers indicated that, given suitable circumstances, they wanted to use the paver’s trolley.

Relevance to industry

To reduce the chance of work-related low back and knee complaints among pavers, the duration, frequency and intensity of lower back and knee-straining activities should be limited by means of technical measures such as mechanical paving. The paver’s trolley does not appear to reduce knee-straining activities and therefore does not appear useful in reducing the risk of knee complaints and disorders.     

Early design stage exploration of fixed-length block structured architectures

An important challenge concerning the design of future microprocessors is that current design methodologies are becoming impractical due to long simulation runs and due to the fact that chip layout considerations are not incorporated in early design stages. In this paper, we show that statistical modeling can be used to speed up the architectural simulations and is thus viable for early design stage explorations of new microarchitectures. In addition, we argue that processor layouts should be considered in early design stages in order to tackle the growing importance of interconnects in future technologies. In order to show the applicability of our methodology which combines statistical modeling and processor layout considerations in an early design stage, we have applied our method on a novel architectural paradigm, namely a fixed-length block structured architecture. A fixed-length block structured architecture is an answer to the scalability problem of current architectures. Two important factors prevent contemporary out-of-order architectures from being scalable to higher levels of parallelism in future deep-submicron technologies: the increased complexity and the growing domination of interconnect delays. In this paper, we show by using statistical modeling and processor layout considerations, that a fixed-length block structured architecture is a viable architectural paradigm for future microprocessors in future technologies thanks to the introduction of decentralization and a reduced register file pressure.     

The Shopping Jacket: Wearable computing for the consumer

As part of the Bristol Wearable Computing Initiative, we are exploring location-sensing systems suitable for use with wearable computing. In this paper we present our findings, and in particular a wearable application — the ‘Shopping Jacket’ — which relies on a minimal infrastructure to be effective. We use two positioning devices, ‘pingers’ and GPS. The pinger is used to signal the presence of a shop, and to indicate the type of shop and its website. The GPS is used to disambiguate which branch of a high street chain is being passed. The wearable uses this information to determine whether the wearer needs to be alerted that they are passing an interesting shop, or to direct the wearer around a shopping mall. The Shopping Jacket integrates a wearable CardPC, GPS and pinger receivers, a near-field radio link, hand-held display, GSM data telephone and a speech interface into a conventional sports blazer.     

Influence of photoperiod on carbon dioxide and methane emissions from two pilot-scale stabilization ponds

Greenhouse gas (GHG) emissions (CO(2), CH(4)) from pilot-scale algal and duckweed-based ponds (ABP and DBP) were measured using the static chamber methodology. Daylight and nocturnal variations of GHG and wastewater characteristics (e.g. chemical oxygen demand (COD), pH) were determined via sampling campaigns during midday (12:30-15:30) and midnight (00:30-03:30) periods. The results showed that under daylight conditions in ABP median emissions were -232 mg CO(2) m(-2) d(-1) and 9.9 mg CH(4) m(-2) d(-1), and in DBP median emissions were -1,654.5 mg CO(2) m(-2) d(-1) and 71.4 mg CH(4) m(-2) d(-1), respectively. During nocturnal conditions ABP median emissions were 3,949.9 mg CO(2) m(-2) d(-1), 12.7 mg CH(4) m(-2) d(-1), and DBP median emissions were 5,116 mg CO(2) m(-2) d(-1), 195.2 mg CH(4) m(-2) d(-1), respectively. Once data measured during daylight were averaged together with nocturnal data the median emissions for ABP were 1,566.8 mg CO(2) m(-2) d(-1) and 72.1 mg CH(4) m(-2) d(-1), whilst for DBP they were 3,016.9 mg CO(2) m(-2) d(-) and 178.9 mg CH(4) m(-2) d(-1), respectively. These figures suggest that there were significant differences between CO(2) emissions measured during daylight and nocturnal periods (p < 0.05). This shows a sink-like behaviour for both ABP and DBP in the presence of solar light, which indicates the influence of photosynthesis in CO(2) emissions. On the other hand, the fluxes of CH(4) indicated that DBP and ABP behave as net sources of CH(4) during day and night, although higher emissions were observed from DBP. Overall, according to the compound average (daylight and nocturnal emissions) both ABP and DBP systems might be considered as net sources of GHG.     

Understanding the Properties of Oxide Scales on Hot Rolled Steel Strip

Surface quality and downstream processability of hot rolled strip depend on tertiary scale thickness and composition at all process stages, from secondary descaling to the cold coil. TGA oxidation experiments provided the basis for quantitative modelling of scale growth during finishing hot rolling of low carbon steels (with or without Si or P). Finishing temperature (FT), gauge, and (particularly at the edges) coiling temperature (CT) are the main influence factors with respect to scale thickness. Based on HTXRD oxidation trials and microscopic analyses, trendlines are presented that roughly predict the final scale composition as a function of CT, for the coil centre and the edges. It appears that a CT of 400‐600°C, in combination with a coil centre position, is favourable for decomposed wustite, which is the preferred component for a good scale ad‐ and cohesion. Retention of wustite, the most preferred phase in the roll bite but very brittle at room temperature, is promoted by relatively high CTs (particularly with a coil quench) and by very low CTs. Hematite is formed at the edges in case of a high CT. This extremely hard phase is unwanted at any stage.     

Robust flexible LCDs with paintable technology

Abstract— In this article, second‐generation liquid‐crystal displays (LCDs) made by Paintable LCD technology is presented. With this technology, LCDs are manufactured by a sequence of simple coating and UV curing processes. Since the process can be carried out on plastic substrates and the stack of optical layers is only tens of micrometers thick, the resulting LCDs are ultra‐thin and flexible.     

A comparison of the tribological behaviour of steel/steel, steel/DLC and DLC/DLC contacts when lubricated with mineral and biodegradable oils

Diamond-like carbon (DLC) coatings, which can nowadays be applied to many highly loaded mechanical components, sometimes need to operate under lubricated conditions. It is reasonable to expect that in steel/DLC contacts, at least the steel counter body will behave according to conventional lubrication mechanisms and will interact with lubricants and additives in the contact. However, in DLC/DLC contacts, such mechanisms are still unclear. For example, the “inertness” of DLC coatings raises several questions about whether they are able to provide real boundary “lubrication” or whether they are just a “passive” member in these contacts. On the other hand, biodegradable oils, in particular vegetable base oils, possess a good lubricating ability, often much better than mineral or conventional synthetic oils as a result of the large amount of un-saturated and polar components that can promote the lubricity of DLC coatings. Accordingly, in this study, we present the results of experiments under severe boundary-lubrication conditions during reciprocating sliding. We look at the effect of the type of mating surfaces - steel/DLC, DLC/DLC and steel/steel - and the type of oil on the tribological performance of DLC coatings. We compare the wear and friction behaviours of two types of DLC coatings, i.e., a “pure” non-doped a-C:H DLC coating (denoted as a-DLC) and a WC-containing multilayer coating (denoted as W-DLC) tested with a mineral oil and a biodegradable vegetable oil. These oils, which have very different chemical compositions, were used as base oils and also with mild AW and strong EP additives. Among other things, the results confirm the following: (1) coating/coating lubricated contacts can resemble metal-lubrication mechanisms; (2) additives reduce wear in coating/coating contacts by up to 80%; (3) better wear and friction performance are obtained with oils that contain large amounts of polar and un-saturated molecules; (4) a coating/coating combination generally results in less wear than a steel/coating combination.