Primary vacuum standard for UHV range — Standing experience and present problems

Accurate calibrations of gauges to ever lower pressures (higher vacuum) are increasingly becoming necessary. The calibrations over the entire ultra high vacuum (UHV) range i.e. up to 10⁻¹⁰ Pa are already sometimes demanded by the users of vacuum measuring devices. Standards covering part of this range are available in some national metrological laboratories while primary standards covering the entire UHV range are under development. However, the most suitable principle of the primary standard for generating such a low pressure is still not clear. In spite of some attempts during the last century no sufficiently accurate absolute (“calibration-free”) gauge for high vacuum (HV) and UHV ranges has been developed to date. Apparatuses for generating gas pressure in a dynamic flow control method will continue to be used as primary standards for the UHV range, but, by virtue of technical difficulties, the equilibrium (Maxwellian velocity distribution) will be severely disturbed during the process of pressure generation that the pressure in the chamber will not be defined as a simple scalar quantity. This principal problem must be solved first by the development of a primary UHV standard. Another serious problem in the design of an apparatusfor generating controlled pressures on the order of 10⁻¹⁰ Pa requires the uncontrolled changes of gas pressure to 10⁻¹² Pa or lower. Hence an extremely high vacuum (XHV) apparatus must be used in which the requirements concerning the pumps and the outgassing rate from the materials are kept very strict.     

Verklebung von wachsimprägnierter Buche unter Variation der Klebesysteme und Durchführung einer Plasmabehandlung

Beech wood was impregnated with two hot melting waxes. Contact angle measurement followed to determine hydrophobizing of such treated wood. Tensile shear tests were carried out to test the adhesion properties with three different glues under varying environmental conditions. Furthermore, wax impregnated beech was subjected to plasma treatment prior to glueing. The results demonstrate that wood treated with polar paraffin shows lower adhesion properties compared to montan wax. Therefore, montan wax was investigated more intensely. Beech impregnated with such wax can be used for constructive building elements in the interior sector. D3 Glues for non-constructive applications were realized by using PVAc and phenol-resorcinol resin under permanent influence of humidity. Plasma treatment improves this quality to obtain D4 glue. Back-drying of the water stored specimens proves the suitability of isocyanate glue and also that of PVAc after plasma treatment for 120 s.     

How indirect supportive digital help during and after solving physics problems can improve problem-solving abilities

This study investigates the effectiveness of computer-delivered hints in relation to problem-solving abilities in two alternative indirect instruction schemes. In one instruction scheme, hints are available to students immediately after they are given a new problem to solve as well as after they have completed the problem. In the other scheme, hints are only available as worked out problems after students have finished their solution. The instruction schemes are supplied by means of a web-based program, Physhint, which supports the development of strategic knowledge [Pol, H. J., Harskamp, E. G., & Suhre, C. J. M. (2008). The effect of the timing of instructional support in a computer-supported problem-solving program for students in secondary physics education. Computers in Human Behavior, 24, 1156–1178]. This program supports novice problem solvers while undertaking physics problems concerned with forces by providing hints structured in accordance with Schoenfeld’s episodes [Schoenfeld, A. H. (1992). Learning to think mathematically: Problem solving, metacognition, and sense making in mathematics. In D. A. Grouws (Ed.), Handbook of research on mathematics teaching (pp. 224–270). New York: McMillan Publishing].     

Compensation of magnetic disturbances improves inertial and magnetic sensing of human body segment orientation.

This paper describes a complementary Kalman filter design to estimate orientation of human body segments by fusing gyroscope, accelerometer, and magnetometer signals from miniature sensors. Ferromagnetic materials or other magnetic fields near the sensor module disturb the local earth magnetic field and, therefore, the orientation estimation, which impedes many (ambulatory) applications. In the filter, the gyroscope bias error, orientation error, and magnetic disturbance error are estimated. The filter was tested under quasi-static and dynamic conditions with ferromagnetic materials close to the sensor module. The quasi-static experiments implied static positions and rotations around the three axes. In the dynamic experiments, three-dimensional rotations were performed near a metal tool case. The orientation estimated by the filter was compared with the orientation obtained with an optical reference system Vicon. Results show accurate and drift-free orientation estimates. The compensation results in a significant difference (p < 0.01) between the orientation estimates with compensation of magnetic disturbances in comparison to no compensation or only gyroscopes. The average static error was 1.4 degrees (standard deviation 0.4) in the magnetically disturbed experiments. The dynamic error was 2.6 degrees root means square.     

The Well Mannered Wearable Computer

In this paper we describe continuing work being carried out as part of the Bristol Wearable Computing Initiative. We are interested in the use of context sensors to improve the usefulness of wearable computers. A CyberJacket incorporating a Tourist Guide application has been built, and we have experimented with location and movement sensing devices to improve its performance. In particular, we have researched processing techniques for data from accelerometers which enable the wearable computer to determine the user’s activity. We have experimented with, and review, techniques already employed by others; and then propose new methods for analysing the data delivered by these devices. We try to minimise the number of devices needed, and use a single X-Y accelerometer device. Using our techniques we have adapted our CyberJacket and Tourist Guide to include a multimedia presentation which gives the user information using different media depending on the user’s activity as well as location.     

A 640 by 480 Pixels Readout Circuit for IR Imaging

A readout circuit for a 640 × 480 pixels FPA (focal plane array) has been successfully designed, fabricated and tested. The circuit solution is based on a per pixel source-follower direct injection (SFDI) pre-amplifier. Signal multiplexing is performed in both X and Y direction. The pixel size is 25 m × 25m. The chip is optimized for a QWIP (quantum well infrared photodetector) operating at a temperature of 70 K. The circuit has been realized in a standard 0.8 m CMOS process.