Advanced product planning: a comprehensive process for systemic definition of new product requirements

This paper reports results of research into the definition of requirements for new consumer products––specifically, electro-mechanical products. The research dealt with the derivation of design requirements that are demonstrably aligned with stakeholder needs. The paper describes a comprehensive process that can enable product development teams to deal with statements of product requirements, as originally collected through market research activities, in a systematic and traceable manner from the early, fuzzy front end, stages of the design process. The process described has been based on principles of systems engineering. A case study from its application and evaluation drawn from the power sector is described in this paper. The case study demonstrates how the process can significantly improve product quality planning practices through revision of captured product requirements, analysis of stakeholder requirements and derivation of design requirements. The paper discusses benefits and issues from the use of the process by product development teams, and identifies areas for further research. Finally, the conclusions drawn from the reported research are presented.

Immunoglobulin 1 (IgG1) Fc-glycosylation profiling of anti-citrullinated peptide antibodies from human serum

In several autoimmune disorders, including rheumatoid arthritis (RA), autoantibodies are thought to be the driving force of pathogenicity. Glycosylation of the Fc-part of human Igs is known to modulate biological activity. Hitherto, glycosylation of human IgG-Fc has been analyzed predominantly at the level of total serum IgG, revealing reduced galactosylation in RA. Given the pathogenic relevance of autoantibodies in RA, we wished, in the present study, to address the question whether distinct Fc-glycosylation features are observable at the level of antigen-specific IgG subpopulations. For this purpose, we have developed a method for the microscale purification and Fc-glycosylation analysis of anti-citrullinated peptide antibodies (ACPA). ACPA represent a group of autoantibodies that occur with unique specificity in RA patients. Their presence is associated with increased inflammatory disease activity and rapid joint destruction. Results indicate that ACPA of the IgG1 subclass vary considerably from total serum IgG1 with respect to Fc-galactosylation, with galactosylation being higher on ACPA than on serum IgG1 for some patients, while other patients show higher galactosylation on serum IgG1 than on ACPA. Using this method, studies can be performed on the biological and clinical relevance of ACPA glycosylation within RA patient cohorts.     

Precise selective deposition of microparticles on electrodes of microelectronic chips

We examined the high precision deposition of toner and polymer microparticles with a typical size of approximately 10 microm on electrode arrays with electrodes of 100 microm and below using custom-made microelectronic chips. Selective desorption of redundant particles was employed to obtain a given particle pattern from preadsorbed particle layers. Microparticle desorption was regulated by dielectrophoretic attracting forces generated by individual pixel electrodes, tangential detaching forces of an air flow, and adhesion forces on the microchip surface. A theoretical consideration of the acting forces showed that without pixel voltage, the tangential force applied for particle detachment exceeded the particle adhesion force. When the pixel voltage was switched on, however, the sum of attracting forces was larger than the tangential detaching force, which was crucial for desorption efficiency. In our experiments, appropriately large dielectrophoretic forces were achieved by applying high voltages of up to 100 V on the pixel electrodes. In addition, electrode geometries on the chip's surface as well as particle size influenced the desorption quality. We further demonstrated the compatibility of this procedure to complementary metal oxide semiconductor chip technology, which should allow for an easy technical implementation with respect to high-resolution microparticle deposition.     

Chemical sensor based on a novel capacitive microwave flexible transducer with polymer nanocomposite-carbon nanotube sensitive film

Microsystem Technologies - This study presents the results on the feasibility of a resonant planar chemical capacitive sensor in the microwave frequency range suitable for gas detection and...     

Analysis of Non-Equilibrium Fluctuations In A Ternary Liquid Mixture

From the benchmark values of the diffusion and thermodiffusion coefficients of the tetralin, isobutylbenzene and n-dodecane ternary mixture, and the published optical contrast factors, we have evaluated the theoretical amplitudes of the two composition modes of the refractive-index fluctuations. Shadowgraph experiments have been performed on ground, where the current theory is expected to be correct only for large wave vectors. Two decay times have been observed experimentally. The fastest one being related to the thermal diffusivity of the mixture, while the slower one to mass diffusion. Hence, it has not been possible to distinguish the two eigenvalues of the mass diffusion matrix, a problem also encountered in traditional light-scattering with ternary mixtures of similar-size molecules. Thus, to compare the measured Intermediate Scattering Function with theory, we fix the amplitudes and decay rates to the benchmark values, use the wave number as a fitting parameter, and compare it to the experimental wave number. The good agreement between theory and experiments for the larger wave numbers validates the theory developed for the microgravity conditions.     

Preparation and structural study of Mg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiO<Subscript>3</Subscript> ceramics and their dielectric properties from 1 Hz to 7.7 GHz

A series of Mg_1?x Zn _x TiO₃, x = 0–0.5 (MZT0–MZT0.5) ceramics was synthesised and characterised. The dielectric properties of the samples in the frequency range of 1 Hz–7.7 GHz were explored using three different methods: a contacting electrode method, a parallel-plate method and a perturbed resonator method. The electrical properties in the space charge and dipolar polarisation frequency ranges are discussed in relation to the phase composition and microstructure data. Differences in the zinc substitution divided the dielectrics into two groups, namely MZT0–MZT0.2 and MZT0.3–MZT0.5, each with different amount of a main Mg_1?x Zn _x TiO₃ solid solution phase and a secondary solid solution phase. Zinc substitution promoted the density of the ceramics, improved the purity of the main phase and increased the permittivity for frequencies up to 10⁸ Hz, but reduced the permittivity in the microwave range. In the MZT0.3–MZT0.5 samples, for frequencies less than 1 MHz the quality (Q × f) factors were lower and log σ _a.c, the AC conductivity, was higher than for the MZT0–MZT0.2 samples. Above 10 MHz, the (Q × f) factors and log σ _a.c of the two groups were similar.     

Pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy: outcome and prognostic factors

STUDY OBJECTIVE: To determine predictors of mortality from pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy, and the significance of those factors related to the underlying malignancy and its therapy as well as of those related to the severity of the illness associated with pulmonary infiltrates. DESIGN: A historical cohort study. SETTING: A university teaching hospital and tertiary referral center. PATIENTS AND METHODS: Overall, 53 patients with neutropenia during chemotherapy and with first episodes of pulmonary infiltrates during a 4-year period were studied. Prognostic analysis included 38 variables. Multivariate analyses were performed by logistic regression. RESULTS: The survival rate from pneumonia was 57% (30/53). The following eight parameters were significantly associated with death in univariate analysis: comorbidity present; development of "late" pulmonary infiltrates (> or = 14 days after hospital admission); heart rate > or = 100 beats/min; a ratio heart rate/systolic blood pressure (HR/SBP) > or = 1.2; urea nitrogen > 7 mmol/L; radiographic score > or = 3; neutropenia < 1.0x10(9)/L at the treatment end point; and failed complete remission. In a multivariate model including only parameters available at diagnosis of pulmonary infiltrates, the presence of a ratio HR/SBP > or = 1.2 and of a radiographic score > or = 3 remained independently associated with death. In a second model also including the evolutionary parameter neutropenia < or = 1.0x10(9)/L at the treatment end point, both parameters remained significant together with neutropenia <1.0x 10(9)/L at the treatment end point. The presence of a ratio HR/SBP > or = 1.2 was a strong marker of early death. CONCLUSION: Both therapy- and malignancy-associated neutropenia as well as the severity of illness associated with pulmonary infiltrates are independent prognostic factors. Patients with a ratio HR/SBP > or = 1.2 at diagnosis of pulmonary infiltrates suffer from potentially reversible acute illness, are at risk for early death and, therefore, may be appropriate candidates for treatment in an ICU.