Naltrexone blocks RFR‐induced DNA double strand breaks in rat brain cells

Previous research in our laboratory has shown that various effects of radiofrequency electromagnetic radiation (RFR) exposure on the nervous system are mediated by endogenous opioids in the brain. We have also found that acute exposure to RFR induced DNA strand breaks in brain cells of the rat. The present experiment was carried out to investigate whether endogenous opioids are also involved in RFRinduced DNA strand breaks. Rats were treated with the opioid antagonist naltrexone (1 mg/kg, IP) immediately before and after exposure to 2450 MHz pulsed (2 µs pulses, 500 pps) RFR at a power density of 2 mW/cm² (average whole body specific absorption rate of 1.2 W/kg) for 2 hours. DNA double strand breaks were assayed in brain cells at 4 hours after exposure using a microgel electrophoresis assay. Results showed that the RFR exposure significantly increased DNA double strand breaks in brain cells of the rat, and the effect was partially blocked by treatment with naltrexone. Thus, these data indicate that endogenous opioids play a mediating role in RFRinduced DNA strand breaks in brain cells of the rat.     

Blind identification of an autoregressive system using a nonlineardynamical approach

The problem of identifying an autoregressive (AR) system with arbitrary driven noise is considered here. Using an abstract dynamical system to represent both chaotic and stochastic processes in a unified framework, a dynamic-based complexity measure called phase space volume (PSV), which has its origins in chaos theory, can be applied to identify an AR model in chaotic as well as stochastic noise environments. It is shown that the PSV of the output signal of an inverse filter applied to identify an AR model is always larger than the PSV of the input signal of the AR model. Therefore, by minimizing the PSV of the inverse filter output, one can estimate the coefficients and the order of the AR system. A major advantage of this minimum-phase space volume (MPSV) identification technique is that it works like a universal estimator that does not require precise statistical information about the AR input signal. Because the theoretical PSV is so difficult to compute, two approximations of PSV are also considered: the e-PSV and nearest neighbor PSV. Both approximations are shown to approach the ideal PSV asymptotically. The identification performance based on these two approximations are evaluated using Monte Carlo simulations. Both approximations are found to generate relatively good results in identifying an AR system in various noise environments, including chaotic, non-Gaussian, and colored noise     

Performance evaluation of path optimization schemes for inter‐switch handoff in wireless ATM networks

One of the major design issues in wireless ATM is the support of inter‐switch handoff. An inter‐switch handoff occurs when a mobile terminal moves to a new base station connecting to a different switch. Recently, a two‐phase handoff protocol has been proposed to support inter‐switch handoff in wireless ATM networks. With the aim of shortening handoff delay while using the network resources efficiently, the two‐phase handoff protocol employs path extension for each inter‐switch handoff, followed by path optimization if necessary. To implement the two‐phase handoff protocol efficiently, we need to determine when to trigger path optimization. In this paper, we propose and analyze three path optimization schemes, namely: periodic, exponential, and Bernoulli, for the two‐phase handoff protocol. The design objective is to determine the time to invoke path optimization such that the average cost per connection is minimized. We develop a discrete time analytical model and a discrete‐event simulation model for comparing the performance of the three path optimization schemes. Results indicate that the Bernoulli path optimization scheme outperforms the other two schemes by providing a lower average cost per connection. The proposed models can also be adapted to analyze other path optimization schemes in general. This revised version was published online in July 2006 with corrections to the Cover Date.     

Charge Generation and Photovoltaic Operation of Solid‐State Dye‐Sensitized Solar Cells Incorporating a High Extinction Coefficient Indolene‐Based Sensitizer

An investigation of the function of an indolene‐based organic dye, termed D149, incorporated in to solid‐state dye‐sensitized solar cells using 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxypheny‐amine)‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the hole transport material is reported. Solar cell performance characteristics are unprecedented under low light levels, with the solar cells delivering up to 70% incident photon‐to‐current efficiency (IPCE) and over 6% power conversion efficiency, as measured under simulated air mass (AM) 1.5 sun light at 1 and 10 mW cm^?2. However, a considerable nonlinearity in the photocurrent as intensities approach “full sun” conditions is observed and the devices deliver up to 4.2% power conversion efficiency under simulated sun light of 100 mW cm^?2. The influence of dye‐loading upon solar cell operation is investigated and the thin films are probed via photoinduced absorption (PIA) spectroscopy, time‐correlated single‐photon counting (TCSPC), and photoluminescence quantum efficiency (PLQE) measurements in order to deduce the cause for the non ideal solar cell performance. The data suggest that electron transfer from the photoexcited sensitizer into the TiO₂ is only between 10 to 50% efficient and that ionization of the photo excited dye via hole transfer directly to spiro‐OMeTAD dominates the charge generation process. A persistent dye bleaching signal is also observed, and assigned to a remarkably high density of electrons “trapped” within the dye phase, equivalent to 1.8 × 10¹⁷ cm^?3 under full sun illumination. it is believed that this localized space charge build‐up upon the sensitizer is responsible for the non‐linearity of photocurrent with intensity and nonoptimum solar cell performance under full sun conditions.     

Apparent chemical composition of nine commercial or semi-commercial whey protein concentrates, isolates and fractions

Summary Analytical results are given for whey powders prepared on a commercial or semi-commercial scale by three companies. Altogether, five preparations enriched in β-lactoglobulin, four whey protein isolates and a fraction enriched in α-lactalbumin were analyzed for protein composition, including %β-lactoglobulin, α-lactalbumin, bovine serum albumin, casein (glyco) macropeptide and the main triglycerides. Protein composition was determined by high pressure gel permeation and reversed phase liquid chromatography and by capillary zone electrophoresis. The extent of modification of the native β-lactoglobulin structure was also measured through the degree of lactosylation and the fraction of accessible free sulphydryl groups. One significant finding was that the calculated recovery of protein following quantitation of the chromatogram or electropherogram was seldom above 90% and occasionally below 60% of that loaded onto the column or capillary, raising doubts as to the reliability of the analytical results. Extrapolation by linear regression to 100% recovery allowed estimates to be made of the true β-lactoglobulin composition of the samples. The nine samples could be placed into three distinct groups with estimated true β-lactoglobulin weight % of 70.9 ± 1.1, 62.0 ± 3.4 and 39.5 ± 4.9. Physico-chemical properties of the group of samples are reported elsewhere (Holt et al ., 1999).     

Pectic Galactan Polysaccharide-Based Gene Delivery System for Targeting Neuroinflammation

Treating neuroinflammation-related injuries and disorders through manipulation of neuroinflammation functions is being heralded as a new therapeutic strategy. In this study, a novel pectic galactan (PG) polysaccharide based gene therapy approach is developed for targeting reactive gliosis in neuroinflammation. Galectin-3 (Gal-3) is a cell protein with a high affinity to β-galactoside sugars and is highly expressed in reactive gliosis. Since PG carries galactans, it can target reactive gliosis via specific carbohydrate interaction between galactan and Gal-3 on the cell membrane, and therefore can be utilized as a carrier for delivering genes to these cells. The carrier is synthesized by modifying quaternary ammonium groups on the PG. The resulting quaternized PG (QPG) is found to form complexes with plasmid DNA with a mean diameter of 100 nm and have the characteristics required for targeted gene therapy. The complexes efficiently condense large amounts of plasmid per particle and successfully bind to Gal-3. The in vivo study shows that the complexes are biocompatible and safe for administration and can selectively transfect reactive glial cells of an induced cortical lesion. The results confirm that this PG-based delivery system is a promising platform for targeting Gal-3 overexpressing neuroinflammation cells for treating neuroinflammation-related injuries and neurodegenerative diseases.     

Self-Assembled Perovskite Nanoislands on CH3NH3PbI3 Cuboid Single Crystals by Energetic Surface Engineering

Organometal perovskite single crystals have been recognized as a promising platform for high-performance optoelectronic devices, featuring high crystallinity and stability. However, a high trap density and structural nonuniformity at the surface have been major barriers to the progress of single crystal-based optoelectronic devices. Here, the formation of a unique nanoisland structure is reported at the surface of the facet-controlled cuboid MAPbI₃ (MA = CH₃NH₃⁺) single crystals through a cation interdiffusion process enabled by energetically vaporized CsI. The interdiffusion of mobile ions between the bulk and the surface is triggered by thermally activated CsI vapor, which reconstructs the surface that is rich in MA and CsI with reduced dangling bonds. Simultaneously, an array of Cs-Pb-rich nanoislands is constructed on the surface of the MAPbI₃ single crystals. This newly reconstructed nanoisland surface enhances the light absorbance over 50% and increases the charge carrier mobility from 56 to 93 cm² V⁻¹ s⁻¹. As confirmed by Kelvin probe force microscopy, the nanoislands form a gradient band bending that prevents recombination of excess carriers, and thus, enhances lateral carrier transport properties. This unique engineering of the single crystal surface provides a pathway towards developing high-quality perovskite single-crystal surface for optoelectronic applications.     

A polyfluoroalkyl imidazolium ionic liquid as iodide ion source in dye sensitized solar cells

We report on the use of a fluorinated imidazolium ionic liquid as a source of iodide ions in solvent-based electrolytes for DSSCs. Efficient dye regeneration and fast charge transport in the fluorinated electrolyte result in an overall improvement of the device performances compared to conventional hydrogenated ionic liquids.     

Impact of the injection‐level‐dependent lifetime on Voc,FF, ideality m,J02, and the dim light response in a commercial PERC cell

The injection‐level‐dependent (ILD) lifetime of the silicon wafer impacts many characteristics of the final photovoltaic cell. While efficiency is commonly understood to be impacted by the silicon bulk lifetime (at the maximum power point injection level), this work demonstrates the wide ranging impacts of ILD lifetime on the V_oc, the fill factor (FF), the diode ideality factor m, and the dim light response. Instead of a two‐diode model, we utilize a boundary + ILD bulk lifetime model to analyze a commercial passivated emitter rear contact (PERC) cell featuring an AlO_x dielectric rear passivation. The ILD lifetime is directly measured and used to calculate the bulk recombination current across injection levels. With this boundary + ILD lifetime model, we demonstrate the role of the ILD lifetime on many cell parameters in this PERC cell. For most high efficiency commercial p‐type monocrystalline solar cells, the typically lower bulk lifetime at the maximum power point versus the lifetime at the open circuit point reduces the measured FF and pseudo‐FF. This work illustrates that for a commercial PERC cell with AlO_x rear passivation, the ILD lifetime is the primary mechanism behind reduced FF, ideality factors greater than 1, and the source of the J₀₂ term in the two‐diode model. The crucial implications of this work are not only to better understand commercial PERC cell loss mechanisms but also to encourage a focus on different metrics in cell diagnostics. One such metric is the V_oc at 0.1 or 0.05 suns. Copyright © 2016 John Wiley & Sons, Ltd.     

Integrated Services over ATM/MAN-Based Personal Communication Networks

IEEE 802.6 metropolitan area networks (MANs) providean efficient architecture for supporting wirelesspersonal communication services (PCSs) overmetropolitan areas by interconnecting wireless basestations into personal communication networks (PCNs).They also serve as peripheral gathering networks totransport PCS traffic over a wide area broadbandintegrated services digital network employingasynchronous transfer mode (ATM), enabling integrationof PCNs in different cities into a global PCN. Bycombining the various access methods and employing adynamic bandwidth integration scheme, a MAN canfunction as a powerful distributed switch forintegrating different types of local traffic.Simulation results are presented to illustrate theadvantages of the integration scheme. To provideubiquitous PCS, we also propose a simplesuffix-dialing method for integrating telephone, fax,paging and email services over the ATM/MAN-based PCNsusing a single personal telecommunication number. Withthis method, the current practice of printing a longlist of phone numbers on one's business card will nolonger be necessary.