Kinetics of catalyzed and non-catalyzed oxidation of soot from a diesel engine

To comply with the new regulations on particulate matter, car manufacturers more and more commonly use diesel particulate filters (DPF). The working of these systems needs to periodically burn soot that has been accumulated during the loading of the DPF. This paper describes the kinetics of the non-catalytic and catalytic oxidation of real diesel soot with oxygen. From these experiments, mechanisms for catalyzed and non-catalyzed soot oxidation have been proposed.     

AgNO<Subscript>3</Subscript> spray tests: advantages,weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state diffusion tests and exposure to natural conditions

Within the framework of the evaluation and the prediction of chloride-induced corrosion risks, simple and rapid AgNO₃ spray tests can be proposed for various issues. This paper forms the first part of a series. In this first part, the Maultzsch procedure (spraying of 0.1-N AgNO₃ solution + K₂CrO₄) as well as the procedure based on the use of a sole AgNO₃ solution have been investigated on a broad range of concretes. These procedures have also been compared to the Collepardi procedure (spraying of 0.1-N AgNO₃ + fluoresceine). The feasibility of these colorimetric techniques on saturated specimens cast in laboratory, after non-steady-state diffusion tests carried out in various conditions, is discussed. In addition, the results obtained from applying such spray tests in field conditions on cores drilled out from various RC test specimens exposed to a marine environment (tidal zone) and to a road and cold environment (freezing-thawing cycles and spraying of deicing salts) are presented. Colorimetric methods have in particular been applied here to the assessment of the average chloride penetration depth and of its evolution versus time (kinetics). Moreover, the detection threshold of these techniques has been investigated in various environments. The possible sources of discrepancy on the results have been analysed.     

Morphological responses in thermally conditioned linear low density polyethylene

An octene-modified linear low density polyethylene has been used to examine the mechanisms involved during thermal annealing. Annealing temperatures ranged from 60 to 100°C. Annealing results in crystallinity increments and these respond to two concurrent effects. One involves the segregation from crystalline regions of low molecular weight moieties in the polymer's molecular weight distribution; the other is lamellar thickening, leading to the formation of more highly perfected crystalline domains. In the present polymer, the two effects were found to be in balance at annealing temperatures near 80°C leading to the optimum distribution of crystalline regions in the amorphous portions of the polymer. The effect of thermal conditioning on mechanical properties of the polymer was illustrated in terms of the initial modulus and the polymer's yield strength. The twin mechanisms of molecular fractionation and lamellar thickening were found to influence both of the mechanical property parameters.     

Myeloma stem cells in autografting in multiple myeloma

Autologous transplantation has been used increasingly over the last 10 years for the treatment of multiple myeloma. As is the case in other cancers treated by high-dose therapy and stem cell rescue, the contribution of occult tumor cells in the graft to relapse posttransplant remains to be resolved. In this report, we review the biology and differentiation of plasma cells in the context of their significance as an origin of relapse in multiple myeloma.     

Lactate clearance and survival following injury

Previous reports cite optimization of O2 delivery (DO2) to 660 mL/min/m2, O2 consumption (VO2) to 170 mL/min/m2, and cardiac index (CI) of 4.5 L/min as predicting survival. We prospectively evaluated 76 consecutive patients with multiple trauma admitted directly to the ICU from the operating room or emergency department. Patients had serum lactate levels and oxygen transport measured on ICU admission and at 8, 16, 24, 36, and 48 hours. Patients were analyzed with respect to survival (S) versus nonsurvival (NS), lactate clearance to normal (< or = 2 mmol/L) by 24 and 48 hours, hemodynamic optimization as defined above, as well as Injury Severity Score (ISS), ICU stay (LOS), and admission blood pressure. All patients achieved non-flow-dependent VO2. There was no difference in CI, DO2, VO2, or ISS when S was compared with NS. All 27 patients whose lactate level normalized in 24 hours survived. If lactate levels cleared to normal between 24 and 48 hours, the survival rate was 75%. Only 3 of the 22 patients who did not clear their lactate level to normal by 48 hours survived. Ten of the 25 nonsurvivors (40%) achieved the above arbitrary optimization criteria. Fifteen of the survivors never achieved any of these criteria. Optimization alone does not predict survival. However, the time needed to normalize serum lactate levels is an important prognostic factor for survival in severely injured patients.     

Analysis of characteristic odors from human male axillae

A number of studies concerning the analysis of axillary odors have assumed that the characteristic odor produced in the axillae is due to volatile steroids and isovaleric acid. Organoleptic evaluation of Chromatographic eluants from axillary extracts was employed to isolate the region in the chromatogram where the characteristic odor eluted. The odor of the dissolved eluant was eliminated when it was treated with base, suggesting that acids make up the characteristic axillary odor. Subsequent extraction of the pH-adjusted axillary extract in conjunction with organoleptic evaluation of the Chromatographic eluant, preparative gas chromatography, and analysis by GC-MS as well as GC-FTIR showed the presence of a number of C₆ to C₁₁ straight-chain, branched, and unsaturated acids as important contributors to the axillary odor. The major odor component is (E)-3-methyl-2-hexenoic acid. Three homologous series of minor components are also important odor contributors; these consist of the terminally unsaturated acids, the 2-methyl-C₆ to -C₁₀ acids and the 4-ethyl-C₅ to -C₁₁ acids. These types of acids have not been reported previously as components of the human axillary secretions and have not been proposed previously as part of the principal odor components in this area.     

Elastic stress analysis of three-dimensional solids with small holes by BEM

An advanced level development of the boundary element method is presented for the elastic stress analysis of a three-dimensional solid containing a large number of small diameter, tubular shaped holes. The formulation has been developed such that these holes can be modelled by a system of curvilinear line elements, resulting in substantial savings in both data preparation and computing costs. This is accomplished by assuming a variation in the displacement field along the circumference defined in terms of trigonometric functions together with a linear or quadratic variation of displacements along the longitudinal direction.     

Selbstgesteuertes Identitätsmanagement

Von eBay bis Xbox Live — wer im Internet unterwegs ist, nutzt viele (Teil-) Identit?ten. Um Waren zu verkaufen oder Dienste anzubieten, tritt man anders auf, als wenn man einfach nur online spielen m?chte. Pseudonyme helfen die Privatsph?re zu wahren. Doch nicht immer ist die Modifikation von Identit?tsmerkmalen zul?ssig.