Power generation characteristics of a sandwich‐type self‐heating thermoelectric generator with spatially varying embedded heat source

Power generation characteristics of a sandwich‐type thermoelectric generator in which the heat source is embedded into thermoelectric elements are investigated. Our previous work on a similar concept only considered a uniform heat source distribution inside thermoelectric elements. In this work, the effect of the spatial distribution of a heat source is examined. In particular, the effect of the concentration of heat source near the one end, that is, the hot end, is intensively studied as a potential means of improving the efficiency of the device. Although the effects of heat source concentration in impractical cases without heat transfer limitations on the cold side remain ambiguous, it become clear that heat source concentration indeed has positive effects in more realistic cases with finite heat transfer coefficients imposed on the cold side. Because of the relatively low efficiency of typical thermoelectric generation, a significant amount of heat must be dissipated from the cold end of the thermoelectric element. Greater heat source concentration near the hot end leads to more effective utilization of available heat source, reduces the amount of heat rejected at the cold end, and lowers the hot end temperature of the thermoelectric element. Overall, it is suggested that heat source concentration can be used as a method to achieve more efficient operation and better structural integrity of the system. Copyright © 2015 John Wiley & Sons, Ltd.     

Digital predistorter using multiple lookup tables

A new digital predistorter is proposed that copes with the variation of power amplifier characteristics faster than the adaptation rate of the predistorter by using multiple lookup tables. Experimental results derived from a prototype show that the proposed predistorter can suppress the adjacent channel interference up to 12 dB compared to the conventional predistorter with a single lookup table.     

Acoustooptic Tunable Gap-Type Bandpass Filter With a Broad Stopband

We demonstrate a novel all-fiber gap-type tunable bandpass filter configuration that consists of a broadband hollow optical fiber (HOF) acoustooptic tunable filter (AOTF) concatenated with a narrowband single-mode fiber (SMF)-AOTF. Owing to the unique mode coupling properties of HOF-AOTF and SMF-AOTF, a narrow passband channel of a full-width at half-maximum (FWHM) of ~4 nm could be formed in a broad stopband platform of a 90-nm FWHM successfully. In this scheme, the center wavelength and rejection efficiency of both passband and stopband were found to be flexibly tunable by adjusting the frequency and the voltage of radio-frequency signals applied to individual acoustic transducers.     

Low-Loss Polymer-Based Long-Range Surface Plasmon-Polariton Waveguide

To improve the propagation loss of polymer-based long-range surface-plasmon-polariton (LR-SPP) waveguide devices at the telecom wavelength range, low-loss LR-SPP waveguides were fabricated in an ultraviolet-curable acrylate polymer with a low refractive index and absorption loss. A propagation loss of 1.72 dB/cm at a wavelength of 1.55 mum was achieved with a 14-nm-thick and 3-mum-wide metal stripe.     

All-Optical Data Vortex Node Using an MZI-SOA Switch Array

We propose and demonstrate a new structure of a Data Vortex switch node for all-optical routing of wavelength-division-multiplexing (WDM) 10-Gb/s optical packets. The proposed node consists of two Mach-Zehnder interferometers with integrated semiconductor optical amplifier: an optical and gate and a high-speed optical switch. In the experiment, WDM 10-Gb/s data packets are successfully routed with 1-dB power penalty at a bit-error rate of 10^-9.     

n+/p+ Gate Bulk FinFETs With Locally Separated Channel Structure for Sub-50-nm DRAM Cell Transistors

We proposed a new p⁺/n⁺ poly-Si gate bulk fin-type field-effect transistor that has two channel fins separated locally by a shallow trench filled with oxide or p⁺ polygate. Key device characteristics were investigated by changing the n⁺ poly-Si gate length La, the material filling the trench, and the width and length of the trench at a given gate length L_g. It was shown that the trench filled with p⁺ poly-Si gate should not be contacted with the source/drain diffusion region to achieve an excellent I_on/I_off (> 1010) that is suitable for sub-50-nm dynamic random access memory cell transistors. Based on the aforementioned device structure, we designed reasonable Ls/Lg and channel fin width W_cfin at given L_g 's of 30, 40, and 50 nm.     

Effect of Composition on Thermoelectric Properties in PbTe-Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> Composites

The solidification of alloys in the Bi₂Te₃-PbTe pseudobinary system at off- and near-eutectic compositions was investigated for their microstructure and thermoelectric properties. Dendritic and lamellar structures were clearly observed due to the phase separation and the existence of a metastable ternary phase. In this system, three phases with different compositions were observed: binary Bi₂Te₃, PbTe, and metastable PbBi₂Te₄. The Seebeck coefficient, electrical resistivity, and thermal conductivity of ternary alloys as well as binary compounds were measured. The phonon thermal conductivities of Pb-Bi-Te alloys were lower than those in binary PbTe and Bi₂Te₃, which could have resulted from the increased interfacial area between phases due to the existence of the metastable ternary phase and the resultant phase separation.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

Thermosonic bonding of lead-free solder with metal bump for flip-chip bonding

While extensive research on the lead-free solder has been conducted, the high melting temperature of the lead-free solder has detrimental effects on the packages. Thermosonic bonding between metal bumps and lead-free solder using the longitudinal ultrasonic is investigated through numerical analysis and experiments for low-temperature soldering. The results of numerical calculation and measured viscoelastic properties show that a substantial amount of heat is generated in the solder bump due to viscoelastic heating. When the Au bump is thermosonically bonded to the lead-free solder bump (Sn-3%Ag-0.5%Cu), the entire Au bump is dissolved rapidly into the solder within 1 sec, which is caused by the scrubbing action of the ultrasonic. More reliable solder joints are obtained using the Cu/Ni/Au bump, which can be applied to flip-chip bonding.     

Enhancement of a WLAN-Based Internet Service

A wireless LAN (WLAN)-based Internet service, called NESPOT, of Korea Telecom (KT), the biggest telecommunication and Internet service company in Korea, has been operational since early 2002. As the numbers of subscribers and deployed access points (APs) increase, KT has been endeavoring to improve its service quality as well as the network management. In this paper, we introduce a joint effort between Seoul National University (SNU) and KT to achieve it. We have been addressing two major issues as part of the joint project thus far: (1) a unified WLAN management/maintenance tool; and (2) real-time traffic support enhancement. We present our on-going efforts as well as some preliminary results. Some issues, which need further attention for the future NESPOT service enhancement, are also introduced.The work reported in this paper was financed and supported by KT. Any opinions, findings, and conclusions or recommendations expressed in this publication are those of the authors and do not necessarily reflect the views of KT. Youngkyu Choi is an M.S. candidate in the department of electrical engineering at Seoul National University (SNU), Seoul, Korea. He received his B.S. with honors in electrical engineering from SNU in 2002. He has a lot of project experiences related with system software development. His current research interests are the design of MAC layer from distributed system to centralized cellular system, resource management in next-generation (4G) cellular system, and mathematical analysis of system performance. He had served in the Korean Army for 3 years from 1998. Sekyu Park is a research staff at the Multimedia & Wireless Networking Lab. (MWNL), Seoul National University (SNU), Seoul, Korea. Before joining MWNL in September 2003, he was with MMC Technology, Seoul, Korea as a Research Staff for five years. His current research interests are in the area of wireless/mobile networks and embedded OS. Sunghyun Choi is an assistant professor at the School of Electrical Engineering, Seoul National University (SNU), Seoul, Korea. Before joining SNU in September 2002, he was with Philips Research USA, Briarcliff Manor, New York, USA as a Senior Member Research Staff and a project leader for three years. He received his B.S. (summa cum laude) and M.S. degrees in electrical engineering from Korea Advanced Institute of Science and Technology (KAIST) in 1992 and 1994, respectively, and received Ph.D. at the Department of Electrical Engineering and Computer Science, The University of Michigan, Ann Arbor in September, 1999. His current research interests are in the area of wireless/mobile networks with emphasis on the QoS guarantee and adaptation, resource management, wireless LAN and PAN, next-generation mobile networks, data link layer protocols, and connection and mobility management. He authored/coauthored over 45 technical papers and book chapters in the areas of wireless/mobile networks and communications. He is the technical program co-chair for ACM International Workshop on Wireless Mobile Applications and Services on WLAN Hotspots (WMASH’2004). He is currently serving on program committees of a number of leading wireless and networking conferences including IEEE INFOCOM, IEEE GLOBECOM, and IEEE VTC. He is also a guest co-editor for a special issue on “Emerging WLAN Applications and Technologies” of Wiley Wireless Communications and Mobile Computing Journal. He is an active participant and contributor of the IEEE 802.11 WLAN standardization committee. Dr. Choi was a recipient of the Korea Foundation for Advanced Studies Scholarship and the Korean Government Overseas Scholarship during 1997–1999 and 1994–1997, respectively. Go Woon Lee is a researcher at Service Development Laboratory, Korea Telecom (KT), Seoul, Korea. She received her B.S. degrees in computer science and material engineering from Korea Advanced Institute of Science and Technology (KAIST) in 1995. She was with Microsoft Korea R&D Group as a research staff in 1995. She received M.S. degree in information & communication from Kwang-Ju Institute of Science and Technology (K-JIST) in 1998. Her current research interests are in the area of wireless/mobile networks with emphasis on data link layer protocols, remote diagnosis, and wireless service management. Jaehwan Lee is a researcher at Korea Telecom (KT), Seoul, Korea. He received his B.S. and M.S. degrees in electrical engineering from Seoul National University (SNU) in 1998 and 2000, respectively. His master’s research was about estimation theory related to Global Positioning System (GPS) and image processing in robot soccer. His current research interest is to analyze and enhance the performance of wireless/mobile networks (IEEE 802.11, sensor networks and mobile ad-hoc networks) regarding QoS, energy-efficiency and high-throughput considering hand-off and inter-networking with heterogeneous networks. Before joining wireless LAN group in KT, he developed the Web-GIS (Geographical Information System) client-server system from 2000 to 2001. Hanwook Jung, Ph.D joined KT in 1985 and got his Ph.D degree with the company finalcial scholarship of KT from 1991 to 1996 at SUNY at Buffalo. His thesis is about “Wireless signal transmission over Fiber by subcarrier multiplexing” which is current heavily utilized for PCS and cellular repeater line. From 1985 to 1991, he had developed a Videotex service which is now known as Hitel. From 1996 to 1999, he developed 26GHz broadband wireless local loop system and contributed to get the license from the government. Since 1999, he has led a business model and service with wireless LAN. The KT Wi-Fi public service, “NESPOT” has 300,000 subscribers and 10,000 public hotspots. In 2003 he was promoted as an assistant vice president leading NESPOT research team to enhance KT’s broadband with 5,000,000 subscribers. His vision regarding next generation communications service is believed to be true by combining the broadband access and wireless technology including WiFi wireless LAN, UWB, and bluetooth in those areas such as wireless home-networking, device-to-device communications, and ubiqutous networking.This revised version was published online in August 2005 with a corrected cover date.