Nucleation and growth of nickel by electrodeposition under galvanostatic conditions

The first stages of nickel electrodeposition on amorphous carbon and polycrystalline silver substrates have been studied under galvanostatic conditions. An island growth mode is observed on the two types of substrate. For equivalent conditions the cluster density is higher on silver substrates than on carbon substrates. Dissolution of some nickel clusters is observed a short time after the onset of electrolysis on carbon substrates. This is confirmed by the evolution of the current efficiency and the evolution of the metal surface cluster density as a function of the quantity of electricity.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

The use of direct tension tests for the assessment of low temperature properties of bituminous binders

In France, tensile tests on bituminous binders are usually performed on vertical electromechanical loading frames, the test samples being placed in an insulated temperature control chamber and the deformations determined from the displacement of the cross-head. The paper presents the results of an inter-laboratory study of which the objective was to evaluate the suitability of this kind of equipment for the performance of direct tension tests at low temperatures. Most of the test parameters, used for this study complied with the procedure proposed by SHRP as from 1995 (AASHTO TP3). The various operating factors, and more particularly those affecting the determination of true sample elongation (mechanical plays, deformation of the gripping systems, ....), are discussed and a number of correcting procedures are proposed. Nevertheless, the results remained scattered. Considering the “flat” evolution of strain at failure with temperature in the domain of brittle behaviour, this makes it rather difficult to accurately define the temperature for failure at 1% elongation (T_ε=1%). This is also the case when this temperature is located in the zone of transition between brittle and ductile behaviour. The authors suggest that, together with the corresponding tensile strain, this “transition temperature” could be used as an alternative criterion which has the advantage of being linked to a physical behaviour of the material.     

Computer-controlled ion-selective electrode switch

The construction of a microcomputer-controlled electrode switch for use in potentiometric determinations is described. This can be coupled to most of the analytical equipment usually found in laboratories, to enable a setting up of automatic systems capable of performing sequential determinations with several ion-selective electrodes. The assessment of its analytical usage and behaviour are discussed.     

Synthesis and characterization of binders

This paper presents an academic analysis of recent progress and changes in polymer science. These changes influence the coatings industry, as an answer to various constraints, such as enhanced applicability, quality certification, safety, and care of environment. We do not focus on a specific topic but instead consider the basic concepts, the chemical advances in polymer synthesis, and progress in fine characterization methods. Experimental results in polymerization, analysis, and new processes, obtained in recent years, in the final period of my laboratory activity, are illustrated. Presented at the 79th Annual Meeting of the Federation of Societies for Coatings Technology, in Atlanta, GA, Nov. 5–7, 2001. 200 Avenue Félix Faure, F-69003-Lyon, LMOPS, 69390 Vernaison on behalf of AFTPVA, France, email: arevillon@gonline.fr.     

Multihour engineering and traffic routing optimization in hierarchical telephone networks

Classical hierarchical routing in telephone networks is extended to a wider class called out-of-chain routing in such a way that some useful properties of hierarchical routing are retained. This new routing pattern offers more potential paths than the fixed hierarchical one and can be introduced as a dynamic routing where the fixed alternate sequences change at some predetermined instants during the day. The effect of this new routing pattern on the network performances is examined. The main topic of this paper is to present heuristic methods used to optimise such routings in large networks. We show on artificial networks that the throughput of a given network can be significantly improved by suitable routing choices. We demonstrate that the integration of routing changes within a multihour dimensioning process is possible but the lack of realistic data does not permit at this time to quantify the value of routing optimization on real networks.