Does morphology stick? Tailored particle morphologies by swelling polymerization process

Structured dispersion particles suitable for pressure sensitive adhesives (PSA) were synthesized via swelling polymerization technique (EP 359562). Particles consisting of poly(n‐butyl acrylate) copolymerized with different types of carboxylic acids were used as seeds. The final particles were synthesized by swelling polymerization process, using 6 wt % styrene or 6 wt % methyl methacylate. The resulting particle morphology was analyzed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). From previous works (Coll Surf A 2001, 183–185, 725–737; J Appl Polym Sci 2004, 91, 2610–2623) where two‐step emulsion polymerization was used on similar particles, it is expected that the particle morphology is affected by the polarity of the monomer used for swelling polymerization because of the phase compatibility (thermodynamic parameter). In this work, the seed particles used were always of a glass transition temperature (T_g) below polymerization temperature. The diffusion of the growing polymer chains from the swelling polymerization is therefore mainly affected by their own T_g and the influence of the carboxy groups on the chain length of the entering radicals (kinetic parameter). The different morphologies of the single particles are discussed qualitatively. The effects of reaction parameters are compared with the results given in the previous work. The structure of the corresponding dispersion films was characterized using AFM. Correlations to macroscopic properties such as the cohesive strength and peel adhesion to different substrates are discussed. The results are also compared with the application properties of the corresponding unmodified particles, statistical copolymers, and to blends with small sized PMMA or PS particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1444–1455, 2006     

Constraint release effects on the dynamics of polymer melts

The dynamical behavior of polymers with molecular weight distribution is analyzed from the standpoint of reptation and tube renewal. In a binary blend where the entanglements between longer chains are prominent, the shorter chain relaxes only by reptation, whereas the longer chain shows more complex behavior, i.e., reptation in the original tube, short-range tube renewal causing the tube enlargement, and thereafter reptation again in the expanded tube. Dynamic moduli data from literature are used for determining the compositional dependence of the relaxation times. Also on the basis of the relaxation mechanism considered here, the critical composition due to the onset of entanglements between different longer chains is proposed as a function of their component molecular weighl ratio.     

Enhancing textile ink-jet printing with chitosan

Following on from previous research, the possibility of using chitosan in preparing the pretreatment print paste for textile ink-jet printing was investigated but the final colour was not as good as expected. In this study, chitosan was applied separately on cotton fabric for ink-jet printing. A two-bath method was proposed and it was confirmed that a better colour yield was achieved with this method. However, the use of chitosan reduced the tensile strength of the ink-jet printed fabric slightly.     

Mobile phase composition for resolving whey proteins in reversed-phase high performance liquid chromatography

Reversed-phase high-performance liquid chromatography was successfully developed for the simultaneous and rapid separation for the main whey proteins, α-Lactalbumin and β-Lactoglobulin. This method consisted of a linear gradient of the two mobile phases of 0.1% trifluoroacetic acid in water and 0.1% trifluoroacetic acid in acetonitrile. The total run time for this separation was approximately 30 min, and α-Lactalbumin was eluted followed byβ- Lactoglobulin. The injection volume was fixed at 20 μl and the flow rate was 1 ml 1/min. The optimum mobile phase composition and gradient conditions to separate α-Lactalbumin and β-Lactoglobulin (A+B) were experimentally obtained at the 15 μm particle with a pore size of 300 Å on the linear-gradient mode.     

Preparation and characterization of polypropylene/layered silicate nanocomposites using an antioxidant

Polypropylene (PP)/layered silicate nanocomposites were prepared via simple melt mixing of three components, PP, layered silicates modified with octadecylamine (C18-MMT) and antioxidant, to investigate the role of antioxidant. TEM and X-ray scattering results confirmed the intercalated state of silicates in PP/layered silicate nanocomposites with antioxidant. In rheological and mechanical study, the nanocomposites with antioxidant showed higher properties than those of the unfilled PP. The nanocomposite with 5 wt% C18-MMT and 0.5 phr antioxidant exhibited about 1.4 times higher tensile modulus and 1.3 times higher storage modulus than the unfilled PP. However, PP/C18-MMT without antioxidant showed lower rheological values owing to the thermal decomposition of PP and the poor compatibility between PP and C18-MMT. It could be concluded that antioxidants played an important role in enhancing the compatibility between PP and C18-MMT. According to the real time X-ray diffraction, the nanocomposite showed the weak ordering of PP crystals than the unfilled PP in the load-extension plateau region of elongation.     

Effect of adsorptive gaseous reactant on non-isothermal behavior for gas-solid reactions

The effect of adsorptive species on non-isothermal gas-solid reactions is studied on the basis of Langmuir-Hinshelwood kinetics. The concept of an effectiveness factor provides good information to ascertain the effect of adsorptive species and the transition of the rate controlling regime, in connection with the parameters, generally used in the analysis of non-isothermal behavior. For highly exothermic reactions, the effectiveness factor-Thiele modulus curves with multiple solutions are presented with respect to the modified adsorption equilibrium constant. The variations of the rate-controlling regime by the effect of adsorptive species are also discussed.     

A new characterization procedure for aqufous solutions with unknown composition

A new characterization procedure for aqueous solutions with unknown composition was proposed based on the binomial distribution of TOC (total organic carbon) fraction in terms of a characterizing variable, the Freundlich coefficient, k, so that the solution in question can be described by a finite number of pseudo.species identified with a certain k value. The validity and computational accuracy of this procedure has been demonstrated by characterizing three sets of experimental data chosen from different sources. Predictions based on this procedure yielded acceptable results that agreed closely with experimental data.     

Diffusional interference in liquid phase counter-adsorptions

A surface diffusion mocel with diffusional interference has been presented for the analysis of multicomponent adsorption of phenols by activated carbon. Surface diffusion coefficients for multicomponent adsorptions were estimated from the relationship between. the surface diffusion coefficient of each species and the surface coverage. The diffusional interference coefficients, W_ij, was determined from experimental counter-adsorption data. The numerical values of W_ij were in the range of 0.4–0.9, which show that the introduction of diffusional interference is necessary to analyze multicomponent counter-adsorptions properly. The proposed model successfully simulates the behaviour of phenols-activated carbon system in a batch adsorber.     

Pt-V2O5-WO3/TiO2 catalysts supported on SiC filter for NO reduction at low temperature

The catalytic filter, V₂O₅-WO₃-TiO₂ supported on a ceramic filter, is known as a promising material for treating particulates and NO _x simultaneously at optimum temperatures around 320°C. In order to improve its catalytic activity at low temperatures, the effect of Pt addition on the catalytic filter has been investigated. Catalytic filters, Pt-V₂O₅-WO₃-TiO₂/SiC, were prepared by co-impregnation of Pt, V, and W precursors on TiO₂ coated-SiC filter by vacuum aided-dip coating. The Pt-added catalytic filter shifted the optimum working temperature from 280–330°C (for the non Pt-impregnated filter) to 180–230°C, providing N _x slip concentration less than 20 ppm for the treatment of 700 ppm NO at a face velocity of 2 cm/s with the same value over the non Pt-added catalytic filters. The promotional effect following the addition of Pt is believed to result from electrical modification of the catalyst maintaining a high electron transfer state. Ammonia oxidation was also observed to be dominant above the optimal temperature for SCR.     

A randomized algorithm for natural object colorization

Natural objects often contain vivid color distribution with wide variety of colors. Conventional colorization techniques, on the other hand, produce colors that are relatively flat with little color variation. In this paper, we introduce a randomized algorithm which considers not only the value of target color but also the distribution of target color. In essence, our algorithm paints a color distribution to a region which synthesizes color distribution of a natural object. Our approach models the correlation between intensity and color in HSV color space in terms of H – S, H – V and S – V joint histogram. During the colorization process, we randomly swap and reassign color of a pixel to minimize a cost function that measures color consistency to its neighborhood and intensity‐to‐color correlation captured in the joint histogram. We tested our algorithm extensively on many natural objects and our user study confirms that our results are more vivid and natural compared to results from previous techniques.