Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Investigation of Ozone Loss Rate Influenced by the Surface Material of a Discharge Chamber

Decay characteristics of ozone concentration in oxygen in a chamber with three types of wall material (stainless steel, copper, and aluminum) are measured using the 254 nm photoabsorption method. Effective lifetimes of ozone are estimated from decay curves of ozone concentration. These values depend on the wall material: They are largest for stainless steel and smallest for aluminum. The relationship between effective lifetime and gas pressure is investigated precisely to determine three values. The equivalent diffusion coefficient of ozone in oxygen and the reflection coefficient of ozone at the wall correspond to the loss rate of ozone at the wall. The collisional loss (quenching) rate coefficient of ozone in oxygen is also determined.     

Triterpene alcohols and sterols of Spanish olive oil

Nine Spanish olive oils, including three each of virgin (pressed oil), refined virgin, and B-residue (solvent-extracted pomace oil) oils from different commercial sources, have been analyzed for their unsaponifiable matter (USM). Four sterolic fractions separated from the oils have been analyzed by preparative thin-layer chromatography (TLC); these fractions are triterpene alcohols, 4-methylsterols, sterols and triterpene dialcohols. The compositions of the four sterolic fractions were determined as their acetates by gas-liquid chromatography (GLC) on an OV-17 glass capillary column. Identification of each component was carried out by argentation TLC, GLC and combined gas chromatography-mass spectrometry (GC-MS); 44 components were identified, of which four: 24-methylene-31-nor-9(11)-lanostenol, 24-methyl-31-nor-E-23-dehydrocycloartanol, 24-ethyl-E-23-dehydrolophenol and 5,E-23-stigmastadienol, were considered to be new sterols from natural sources. Several characteristics, including the content of triteterpene dialcohols in the USM and that of C-24(28) unsaturated sterols in each of the four sterolic fractions, which can be used to distinguish between virgin and B-residue olive oils, were observed.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

Carbon-13 NMR spectroscopic analysis of 24-methyl-Δ5,22-sterols in rape and mustard seed oils

24-Methylcholesta-5,E-22-dien-3β-ol (C₂₈ Δ^5,22-sterol) was separated from the unsaponifiable matters of the following eight seed oils of Brassica species:Brassica campestris (candle I and II and torch),B. napus (tower and midas),B. juncea (brown and oriental mustards), andB. alba (yellow mustard). The configuration at C-24 methyl group of the respective sterols was evaluated by¹³C NMR spectroscopy. All the C₂₈ Δ^5,22-sterols in the Brassica seed oils were found to contain the C-24 epimer of brassicasterol,trans-22-dehydrocampesterol, in the range of ca. 10–30%.     

Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements

The time dependency of the amounts of corrosion products and co-existing adsorbed water on copper in humid air containing SO₂ was estimated from a series of in situ time-resolved IR-RAS spectra on the basis of the relations between the band intensities and the mass changes of the corrosion products, which were determined by simultaneous measurement of IR-RAS and QCM. The amounts of both corrosion products increased slowly at the initial stage and later increased rapidly. Although the relative humidity was kept constant, the amount of adsorbed water increased nearly the same behavior as that of corrosion products in the stage of relatively small amounts of corrosion products and later increased rapidly when the amounts of corrosion products increased. In humid air without SO₂, sulfite gradually decomposed and some of it changed into sulfate.     

Meter-scale large area LED-embedded light fabric for the application of fabric ceilings in rooms

We have developed a meter-scale light emitting diode (LED)-embedded light fabric and its weaving machine for application to a light device for fabric ceilings, which have recently become desired for lightweight safe ceilings in Japan and other countries with frequent earthquakes. The LED fabric structure is 1.2-m-wide woven fabric that has 5-mm-wide LED chip-mounted printed circuit board (PCB) tapes as wefts. LEDs are mounted on the tape of PCBs with a reel-to-reel chip mounting system. Then, the LED-mounted tapes are woven with a developed automatic looming machine that aligns the weft with an accuracy of 0.9 mm, which is suitable for precise arrangement of LEDs and wiring to power supply. A 1.2 × 1.2 m LED-embedded light fabric weighing 320 g/m² was woven. The luminance of the LED fabric is 353 lx at a distance of 1 m, which is the luminance of conventional office lighting. The temperature increase of LEDs without a rigid cooling aluminum plate is only 5.8 °C, and the LED fabric is flexible enough to sustain 1,000 bends down to a radius of 3 mm. This LED fabric and its weaving technology will lead to light devices that have lightweight, large area, and high flexibility for fabric ceilings, walls, and other large areas in homes and offices.     

Characterization of the Advanced Satellite for Cosmology and Astrophysics x-ray telescope: preflight calibration and ray tracing

The x-ray properties of multinested thin-foil mirror x-ray telescopes (XRT's) on board ASCA, the Advanced Satellite for Cosmology and Astrophysics, were fully evaluated with an x-ray pencil beam.Scanning over the telescope aperture of 35 cm in diameter with an x-ray pencil beam, we found the effective area of a set of XRT's to be 325, 200, and 113 cm(2) at energies of 1.5, 4.5, and 8.0 keV, respectively. We derive the point-spread functions (PSF's) of the XRT's by measuring the image profile at the focal plane with an x-ray CCD. The PSF is found to exhibit a sharp core concentrated within 30 arcsec and a broad wing extended to 3 arcmin in half-power diameter. We also evaluate the contribution of stray light, which is caused by the single reflection of x rays by primary or secondary mirrors and by the backside reflection of the mirrors. To obtain the characteristics of the XRT in the energy region of 0.5-10.0 keV, incorporated with the measurements at discrete energies, we develop a ray-tracing method with the telescope design parameter, the PSF, and optical constants. In particular, we obtain the optical constants around the gold-atom M shell (Au-M) absorption-edge energies by measuring the reflectivity of our mirror sample, with monochromatized x-rays in the energy range of 2.0-3.5 keV from synchrotron radiation. Taking into account the PSF's and optical constants, we find that our ray-tracing program can reproduce all these XRT performances.     

Incoherent-only joint-transform correlator

An incoherent-only optical and electronic digital joint-transform correlator is proposed. A technique for the removal of extraneous signals inherent in the incoherent-only joint-transform correlator is also presented. A computer simulation and experimental results confirm the performance of the proposed incoherent-only joint-transform correlator.     

Linearized method: A new approach for kinetic analysis of central dopamine D(2) receptor specific binding

We proposed a new method (;linearized method') to analyze neuroleptic ligand-receptor specific binding in a human brain using positron emission tomography (PET). We derived the linear equation to solve four rate constants, k(3), k(4), k(5), k(6) from PET data. This method does not demand a radioactivity curve in plasma as an input function to the brain, and can perform fast calculations in order to determine rate constants. We also tested the nonlinearized method including nonlinear equations which is a conventional analysis using plasma radioactivity corrected for ligand metabolites as an input function. We applied these methods to evaluate dopamine D(2) receptor specific binding of [(11)C] YM-09151-2. The value of B(max)/K(d)=k(3)/k (4) obtained by the linearized method was 5.72+/-3.1 which was consistent with the value of 5.78+/-3.4 obtained by the nonlinearized method.