Direct Observation of Pure Cu and Cu-Ag Anode Passivation in H2SO4-CuSO4 Aqueous Solution by Channel Flow Double Electrode and Optical Microscopy

Metallurgical and Materials Transactions B - The dissolution and passivation of pure Cu and Cu-5 wt pct Ag anodes in H2SO4-CuSO4 electrolyte were investigated by a direct...     

Levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene-positive organisms in retail seafood determined by the most probable number-polymerase chain reaction (MPN-PCR) method

The incidence and levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene (tdh)-positive organisms in retail seafood were determined. The most probable number-polymerase chain reaction (MPN-PCR) method using a PCR procedure targeting the species-specific thermolabile hemolysin gene (tlh) and tdh was used to determine the levels of V. parahaemolyticus and tdh-positive organisms, respectively. In seafood for raw consumption, V. parahaemolyticus was found in four (13.3%) of 30 fish samples, 11 (55.0%) of 20 crustacean samples, and 29 (96.7%) of 30 mollusc samples. Levels of V. parahaemolyticus were below 10(4) MPN/100 g in all fish and crustacean samples tested. However, they were above 10(4) MPN/100 g in 11 (36.7%) of the 30 mollusc samples. In all seafood for raw consumption, the level of tdh-positive organisms was below the limit of detection (< 30 MPN/100 g). In seafood for cooking, V. parahaemolyticus was found in 15 (75.0%) of 20 fish samples, nine (45.0%) of 20 crustacean sample, and 20 (100%) of 20 mollusc samples. Levels of V. parahaemolyticus were above 10(4) MPN/100 g in only three (15.0%) and one (5.0%) of the 20 fish and 20 crustacean samples, respectively. However, they were above 10(4) MPN/100 g in 18 (90.0%) of the 20 mollusc samples. In seven (35.0%) of the 20 mollusc samples, tdh-positive organisms were found and their levels ranged from 3.6x10 to 1.1 x 103 MPN/100 g. From four of seven tdhpositive samples, tdh-positive V. parahaemolyticus was isolated.     

An active low-pass filter using two capacitive double-layer uniformly distributed RC lines

In this paper we propose an active circuit consisting of two capacitive double-layer uniformly distributed RC lines and an operational amplifier, and present conditions under which the circuit works as the low-pass filter. Furthermore, we present a method for designing the low-pass filter and give a design example where simulation results are included.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.     

Ionic liquid enables simple and rapid sample preparation of human culturing cells for scanning electron microscope analysis

Ionic liquid is a kind of salt that stays in a molten state even at room temperature. It does not vaporize at all in vacuum and facilitates electrical conductivity to the sample surfaces for observations with a scanning electron microscope (SEM). In this study, we used an ionic liquid in SEM for the first time to observe fixed human culture cells. The condition for the cell culture using wrapping sheets and SEM settings were varied to elucidate the optimized protocol. Compared to samples prepared by the conventional way, the ionic liquid‐treatment of samples gave SEM images of the cellular ultra structures in more detail, enabling observation of microvilli that made bridges between separated cells. In addition, the ionic liquid treatment is less time consuming as well as less laborious compared with the conventional way that includes dehydration, drying, and conductivity treatments. Totally, we concluded the ionic liquid is a useful reagent for SEM sample preparation. Microsc. Res. Tech., 2011. © 2010 Wiley‐Liss, Inc.     

Three-layer flow membrane system on a microchip for investigation of molecular transport

A stable three-layer flow system, water/organic solvent/water, has been successfully applied for the first time in a microchannel to get rapid transport through an organic liquid membrane. In the continuous laminar flow region, the analyte (methyl red) was rapidly extracted across the microchannel from the donor to the acceptor phase through the organic solvent phase (cyclohexane). Thermal lens microscopy was used to monitor the process. The thickness of the organic phase, sandwiched by the two aqueous phases, was approximately 64 microm, and it was considered as a thin liquid organic membrane. Permeability studies showed the effects of molecular diffusion, layer thickness, and organic solvent-water partition coefficient on the molecular transport. In the microchip, complete equilibration was achieved in several seconds, in contrast to a conventionally used apparatus, where it takes tens of minutes. The thickness of the organic and aqueous boundary layers was defined as equal to the microchannel dimensions, and the organic solvent-water partition coefficient was determined on a microchip using the liquid/liquid extraction system. Experimental data on molecular transport across the organic membrane were in agreement with the calculated permeability based on the three-compartment water/organic solvent/water model. This kind of experiment can be performed only in a microspace, and the system can be considered as a potential biological membrane for future in vitro study of drug transport.