Histo-pathological study of a glass-ionomer/resin (Geristore) restoration system

The purpose of this experiment was to investigate histo-pathologically the pulpal reaction to a glass-ionomer/resin (Geristore) restoration system in human teeth. Black's class I cavities were prepared in 22 human teeth; these were divided into 2 groups, one with the Geristore after cavity was cleaned with 10% NaOCl solution and 3% H2O2 solution (Group G) and the other with the Geristore after the cavity was applied with Mirage-Bond (Group MG). The treated teeth were observed clinically over 90 days after operation. They were then extracted for histological examination. No unpleasant symptoms were noted. A few pathological changes were observed. No histo-pathological score differences were observed between groups G and MG. The average evaluation score of pathological results in both groups G and MG were excellent. Microorganisms observed in the cavity dentin of the group G was fewer than in group MG. In some cases, microorganisms were observed along the dentin walls. In conclusion, the pulpal injury due to this Geristore restoration system was slight, and the system was considered to be safe for the pulp and clinically useful.     

Changes of biochemical markers during fracture healing

Clinical diagnosis of canine nasal mite (Pneumonyssoides caninum) infection is difficult due to the mite's location in the caudal nasal cavity and frontal sinuses. The current study was performed to evaluate the efficacy of milbemycin oxime in treating dogs with nasal mite infection. A prospective open uncontrolled study included 20 dogs with case histories indicating possible nasal mite infection. Inclusion criteria consisted of either nasal mites being demonstrated (group 1, four dogs), or suspicious clinical signs with no other apparent causes, combined with eosinophilia (group 2, 16 dogs). Milbemycin oxime 1 mg/kg was given orally three times at 10-day intervals. In 17 (85 per cent) dogs, clinical signs resolved completely following milbemycin therapy; within 10 days of the first treatment in 13 cases (group 1, four dogs; group 2, nine dogs) and within 14 days in four cases. In the remaining three dogs clinical signs persisted but were diminished.     

A novel strategy of cell targeting based on tissue-specific expression of the ecotropic retrovirus receptor gene

Gene transfer into specific tissues or cell types is a key technique in the development of gene therapy. Modification of vector particles such that they selectively bind to the target cells has been attempted, but the limitation of this approach is the low transduction efficiency. Here, we show that a two-step gene transfer system can be used for efficient cell targeting. With this strategy, and using a high-titer adenoviral vector containing a tissue-specific promoter, we have engineered a system in which only target cells become susceptible to retrovirus-mediated transduction. In a model experiment, we constructed an adenoviral vector (Ad.AFPEcoRec) containing the ecotropic retrovirus receptor (EcoRec) gene under the control of the alpha-fetoprotein (AFP) promoter. A binding assay showed that after transduction with AD.AFPEcoRec, EcoRec molecules were efficiently expressed in AFP+HepG2 cells, but not in AFP-HeLa and AFP-HLE cells. The EcoRec-expressing HepG2 cells could be stably transduced with ecotropic retroviral vectors, whereas HeLa and HLE cells remained highly resistant to retrovirus-mediated gene transfer. The apparent titer on HepG2 cells was greater than 2 x 10(5) CFU/ml. Because various tissue-specific promoter/enhancer elements are available, the two-step system could be used as a general strategy for both ex vivo and in vivo targeted gene transfer.     

Protein modelling using a chimera reference protein derived from exons

Bovine pancreatic /S-trypsin (PDB ID-code: 1TPO) which is registeredin the Brookhaven Protein Data Bank (PDB) consists of four exons.The results of homology searches for each exon in the PDB showedthat homologous proteins were tonin (PDB ID-code: 1TON), ratmast cell protease (PDB ID-code: 3RP2_A), kaffikrein A (PDBID-code: 2PKA_B) and kallikrein A (2PKA_B) respectively. Thus,for the three-dimensional structure prediction of 1TPO, a chimeraprotein was constructed from the three proteins mentioned aboveand the 3-D structure prediction was performed using this chimerareference protein. The modelled structure of 1TPO was energeticallyoptimized by molecular mechanics and molecular dynamics simulationand was compared with its X-ray crystal structure registeredin the PDB. The root mean square deviations (r.m.s.d.) of mainchain atoms and the neighbouring active site (5 sphere fromHis57, AsplO2 and Serl95) between the modelled structure andthe X-ray structure were 1.66 and 0.94 respectively. Porcinepancreatic elastase (PDB ID-code: 3EST) which is registeredin the PDB was used as the reference protein and the modelledstructure from 3EST was also compared with the X-ray data. Ther.m.s.d. of main chain atoms and that of the active site were2.14 and 1.18 respectively. These results dearly support thepropriety of this method using the chimera reference protein.     

Preparation of TiB2 sintered compacts by hot pressing

A sintered compact of titanium diboride (TiB₂) was prepared by hot pressing of the synthesized TiB₂ powder, which was obtained by a solid-state reaction between TiN and amorphous boron. Densification of the sintered compact occurred at 20 MPa and 1800° C for 5 to 60 min with the aid of a reaction sintering, including the TiB₂ formation reaction between excess 20 at % amorphous boron in the as-synthesized powder (TiB₂ + 0.2B) and intentionally added 10 at % titanium metal. A homogeneous sintered compact of a single phase of TiB₂, which was prepared by hot pressing for 30 min from the starting powder composition [(TiB₂ + 0.2B) + 0.1 Ti], had a fine-grained microstructure composed of TiB₂ grains with diameters of 2 to 3 m. The bulk density was 4.47 g cm^–3, i.e. 98% of the theoretical density. The microhardness, transverse rupture strength and fracture toughness of the TiB₂ sintered compact were 2850 kg mm^–2, 48 kg mm^–2 and 2.4 MN m^–3/2, respectively. The thermal expansion coefficient increased with increasing temperature up to 400° C and had a constant value of 8.8 x 10^–6 deg^–1 above 500° C.     

Effect of grain size on creep of Ti-53.4mol%Al intermetallics at 1100 K

Constant stress creep under compression stress, 100 to 316 MPa, at 1100 K was investigated on single-phase TiAl intermetallics. The material was ingot-cast, isothermally forged, and then annealed to produce stable equi-axed grain structures, whose average grain diameters were 25, 42 and 70m. Creep curves were very similar among the three specimens with different grain diameters and the creep rates at a given strain, as well as the minimum creep rates, depended little on grain size. Two regimes were observed on the stress dependence of the minimum creep rate. The stress exponent under high stresses was about 4.5, independent of grain size. Under stresses lower than about 150 MPa it became about 8.     

Preparation of oriented gold plate/cellulose nanofiber composite films by using TEMPO-oxidized cellulose nanofiber as a reducing agent

Microsystem Technologies - TEMPO-oxidized cellulose nanofiber (TOCN) has been drawing much attention as a useful material for preparation of transparent and stiff films or substrates. In this work,...     

A novel quarter‐wave retardation film for improving viewing angle properties in time‐sequential stereoscopic 3D‐LCDs

We have successfully developed a quarter‐wave retardation film (QWF) for wide viewing angle 3D liquid crystal displays (3D‐LCDs) that provides high luminance, low crosstalk, low color change, and low head‐tilt‐angle dependency. It was found that the out‐of‐plane retardation (Rth) of the QWF in the LCD needs to be close to 0 nm in order to improve the 3D display properties at an off‐axis position and that the in‐plane retardation (Re) needs to be adjusted from 120 to 130 nm to achieve low color change with head tilting. We adopted a coating process for making our QWF because of its potential for retardation control. 3D‐LCDs with this QWF whose Rth was nearly zero had high performance and allowed off‐axis other than on‐axis.     

Cognitive model of team cooperation in en-route air traffic control

Since controller teams are in charge of en-route air traffic control, team cooperation is a key issue for good control performance. We conducted ethnographic field observation at the Tokyo Area Control Center and then analyzed the obtained data to develop a cognitive model of team cooperation in en-route air traffic control. We segmented conversational records, behavioral records, and so on by control unit, and then clarified relations between the segments and identified expert knowledge and judgment behind them. Cognitive processes of controller teams were reconstructed based on a concept of distributed cognition. The analysis revealed that the mutual belief model is applicable to team cooperation processes, the role assignment of tasks within a controller team is implicit and that control plans are implemented smoothly once team situation awareness has been established. A cognitive model of controllers?? team cooperation has been constructed based on these findings.     

Reaction control of TiB2 formation from titanium metal and amorphous boron

TiB₂ powder was synthesized by a controlled formation reaction from titanium metal and amorphous boron. Precursory TiB₂ formed by the pretreatment of the mixed powder (mole ratio: B/Ti=2.0) at 600° C for 60 min in an argon stream. Hollow TiB₂ powder with an average grain size of 15m was obtained by subsequent heat treatment above 900° C for more than 60 min in an argon stream. The formation reaction of TiB₂ powder was further controlled by pretreatment of the mixed powder at 600° C for 60 min in a hydrogen and argon stream and subsequent heat treatment at 1000° C for 360 min in an argon stream, when hollow-free TiB₂ powder was formed by a milder formation reaction between amorphous boron and the reformed titanium metal with hydrogen diffused lattice.