Effect of poly(acrylic acid) on the preparation of thick silica films by electrophoretic sol–gel deposition of re-dispersed silica particles

Thick silica films were prepared by the electrophoretic sol–gel deposition technique in the presence of poly(acrylic acid) (PAA) using monodispersed silica particles; the particles were prepared by the sol–gel method, pre-heat treated and then re-dispersed in the mixture of H2O and ethanol. The weight of deposited silica films was maximized when 0.2 mass % of PAA against the whole amount of sol was added. The particles constructing the thick silica films were packed densely when the amount of added PAA was less than 0.2 mass%. The weight of the film increased with decrease in the content of H2O in the sol when a fixed amount of PAA was added. After the heat treatment of deposited films at 800 °C, crack-free silica films of about 30 m thickness were prepared. © 1998 Chapman & Hall     

Search intensity versus search diversity: a false trade off?

An implicit tenet of modern search heuristics is that there is a mutually exclusive balance between two desirable goals: search diversity (or distribution), i.e., search through a maximum number of distinct areas, and, search intensity, i.e., a maximum search exploitation within each specific area. We claim that the hypothesis that these goals are mutually exclusive is false in parallel systems. We argue that it is possible to devise methods that exhibit high search intensity and high search diversity during the whole algorithmic execution. It is considered how distance metrics, i.e., functions for measuring diversity (given by the minimum number of local search steps between two solutions) and coordination policies, i.e., mechanisms for directing and redirecting search processes based on the information acquired by the distance metrics, can be used together to integrate a framework for the development of advanced collective search methods that present such desiderata of search intensity and search diversity under simultaneous coexistence. The presented model also avoids the undesirable occurrence of a problem we refer to as the ‘ergometric bike phenomenon’. Finally, this work is one of the very few analysis accomplished on a level of meta-meta-heuristics, because all arguments are independent of specific problems handled (such as scheduling, planning, etc.), of specific solution methods (such as genetic algorithms, simulated annealing, tabu search, etc.) and of specific neighborhood or genetic operators (2-opt, crossover, etc.).     

Interactive multiobjective fuzzy random programming through the level set-based probability model

This paper considers a multiobjective linear programming problem involving fuzzy random variable coefficients. A new fuzzy random programming model is proposed by extending the ideas of level set-based optimality and a stochastic programming model. The original problem involving fuzzy random variables is transformed into a deterministic equivalent problem through the proposed model. An interactive algorithm is provided to obtain a satisficing solution for a decision maker from among a set of newly defined Pareto optimal solutions. It is shown that an optimal solution of the problem to be solved iteratively in the interactive algorithm is analytically obtained by a combination of the bisection method and the simplex method.     

A generalized finite-difference time-domain quantum method for the N-body interacting Hamiltonian

The Quantum Finite-Difference Time-Domain (FDTD-Q) method is a numerical method for solving the time evolution of the Schrödinger equation. It can be applied to systems of interacting particles, allowing for realistic simulations of quantum mechanics of various experimental systems. One of the drawbacks of the method is that divergences in the numerical evolution occur rather easily in the presence of interactions, which necessitates a large number of evolution steps or imaginary time evolution. We present a generalized (GFDTD-Q) method for solving the time-dependent Schrödinger equation including interactions between the particles. The new scheme provides a more relaxed condition for stability when the finite difference approximations for spatial derivatives are employed, as compared with the original FDTD-Q scheme. We demonstrate our scheme by simulating the time evolution of a two-particle interaction Hamiltonian. Our results show that the generalized method allows for stable time evolutions, in contrast to the original FDTD-Q scheme which produces a divergent solution.     

Formation of Zirconia Solid Solutions Containing Alumina Prepared by New Preparation Method

In the system ZrO₂–Al₂O₃, a new method for preparing ZrO₂ solid solutions from ZrCl₄ and AlCl₃ using hydrazine monohydrate is investigated. c -ZrO₂ solid solutions containing up to ∼40 mol% Al₂O₃ crystallize at low temperatures from amorphous materials. The formation mechanism is discussed from IR spectral data. The values of the lattice parameter α increase linearly from 0.5072 to 0.5105 nm with increasing Al₂O₃ content. At higher temperatures, transformation of the solid solutions proceeds as follows: c ( SS ) → t ( ss ) → t ( ss ) +α-Al₂O₃→ m +α-Al₂O₃. m -ZrO₂–α-Al₂O₃ composite ceramics are fabricated by hot isostatic pressing for 2 h at 1250°C and 196 MPa. Microstructures and mechanical properties are examined, in connection with increasing Al₂O₃ content.     

Orientation dependence of fracture toughness measured by indentation methods and its relation to surface energy in single crystal silicon

Fracture toughness of silicon crystals has been investigated using indentation methods, and their surface energies have been calculated by molecular dynamics (MD). In order to determine the most preferential fracture plane at room temperature among the crystallographic planes containing the 〈001〉, 〈110〉 and 〈111〉 directions, a conical indenter was forced into (001), (110) and (111) silicon wafers at room temperature. Dominant {110}, {111} and {110} cracks were introduced from the indents on (001), (011) and (111) wafers, respectively. Fracture occurs most easily along {110}, {111} and {110} planes among the crystallographic planes containing the 〈001〉, 〈011〉 and 〈111〉 directions, respectively. A series of surface energies of those planes were calculated by MD to confirm the orientation dependence of fracture toughness. The surface energy of the {110} plane is the minimum of 1.50 Jm⁻² among planes containing the 〈001〉 and 〈111〉 directions, respectively, and that of the {111} plane is the minimum of 1.19 Jm⁻² among the planes containing the 〈011〉 direction. Fracture toughness of those planes was also derived from the calculated surface energies. It was shown that the K _IC value of the {110} crack plane was the minimum among those for the planes containing the 〈001〉 and 〈111〉 directions, respectively, and that K _IC value of the {111} crack plane was the minimum among those for the planes containing the 〈011〉 direction. These results are in good agreement with that obtained conical indentation.     

Comparisons of computed mobile phone induced SAR in the SAM phantom to that in anatomically correct models of the human head

The specific absorption rates (SAR) determined computationally in the specific anthropomorphic mannequin (SAM) and anatomically correct models of the human head when exposed to a mobile phone model are compared as part of a study organized by IEEE Standards Coordinating Committee 34, Sub-Committee 2, and Working Group 2, and carried out by an international task force comprising 14 government, academic, and industrial research institutions. The detailed study protocol defined the computational head and mobile phone models. The participants used different finite-difference time-domain software and independently positioned the mobile phone and head models in accordance with the protocol. The results show that when the pinna SAR is calculated separately from the head SAR, SAM produced a higher SAR in the head than the anatomically correct head models. Also the larger (adult) head produced a statistically significant higher peak SAR for both the 1- and 10-g averages than did the smaller (child) head for all conditions of frequency and position.     

Characterization of Hydroxyapatite Film on Titanium Substrate by Sputtering Technique

Radiofrequeut magnetron sputtering technique was used to produce calcium phosphate coated on the titurdum substrates, and the sputtered coating films were crystallized in an autoclave at 110℃ using a low temperature hydrothermal technique. The crystallization of as-sputtered coating film on the titanium substrates were amorphous calcium phosphate film. However, after the hydrothermal technique, calcium phosphate crystals grew and these were cohumnar crystal. The Ca/P ratio of sputtered coating films in 1.6 to 2.0.     

Cavity and crater depth in hypervelocity impact

We discuss the depth of cavities and craters caused by hypervelocity impacts as a function of impact parameters such as impact velocity, projectile and target densities, and projectile diameter, in two extreme cases: the penetration of intact projectiles at low impact pressure and the hemispherical excavation at very high impact pressure. The relations between the depth and the impact parameters are obtained. Then, previous experimental results are compiled; crater depth normalized by projectile diameter and the ratio of projectile and target densities is plotted for glass, plastic, and metal projectiles and metal, rock, ice, foam, sheet-stack, and aerogel targets. The trends of the data are consistent with the relations in the extreme cases.