Pulsed laser irradiation impact on two marine diatoms Skeletonema costatum and Chaetoceros gracilis

The ability of pulsed laser irradiations to cause damage on the biofouling organisms is recently being investigated. If this technique is employed in industries such as power generation wherein a large quantity of water is being used for the cooling purpose, many organisms other than the targeted would get affected. In this study, we have investigated the damage caused by the pulsed laser irradiations from an Nd:YAG laser (fluence 0.1J/cm(2)) for varying durations such as 2, 5, 10, 30, 60 and 300 s on two marine diatom species namely Skeletonema costatum and Chaetoceros gracilis. Upon exposure to low power laser irradiations, these diatom species showed mortalities between 52.6+/-9.3% to 97.7+/-3.1% in the case of S. costatum and 57.8+/-2.5% to 98.9+/-0.6% in the case of C. gracilis for 2 and 300 s of irradiations, respectively. The mortality increased with the increase in the duration of laser irradiation. The estimation of the chlorophyll a concentration in the irradiated samples showed a considerable reduction varying between 9.8% and 57% in C. gracilis and 3% and 70.3% in S. costatum for 2 and 300 s of irradiations, respectively. The laser-survived cells grew as the non-irradiated (control) samples. C. gracilis frustules were broken by the laser whilst, the cell materials were drained out of the frustules in the case of S. costatum. The study therefore showed that the low power pulsed laser irradiations could cause significant damage on the two species of planktonic diatoms.     

Spectral interference Mirau microscope with an acousto-optic tunable filter for three-dimensional surface profilometry

A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-microm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.     

Analysis of specular resonance in dielectric bispheres using rigorous and geometrical-optics theories

We have recently identified the resonant scattering from dielectric bispheres in the specular direction, which has long been known as the specular resonance, to be a type of rainbow (a caustic) and a general phenomenon for bispheres. We discuss the details of the specular resonance on the basis of systematic calculations. In addition to the rigorous theory, which precisely describes the scattering even in the resonance regime, the ray-tracing method, which gives the scattering in the geometrical-optics limit, is used. Specular resonance is explicitly defined as strong scattering in the direction of the specular reflection from the symmetrical axis of the bisphere whose intensity exceeds that of the scattering from noninteracting bispheres. Then the range of parameters for computing a particular specular resonance is specified. This resonance becomes prominent in a wide range of refractive indices (from 1.2 to 2.2) in a wide range of size parameters (from five to infinity) and for an arbitrarily polarized light incident within an angle of 40 degrees to the symmetrical axis. This particular scattering can stay evident even when the spheres are not in contact or the sizes of the spheres are different. Thus specular resonance is a common and robust phenomenon in dielectric bispheres. Furthermore, we demonstrate that various characteristic features in the scattering from bispheres can be explained successfully by using intuitive and simple representations. Most of the significant scatterings other than the specular resonance are also understandable as caustics in geometrical-optics theory. The specular resonance becomes striking at the smallest size parameter among these caustics because its optical trajectory is composed of only the refractions at the surfaces and has an exceptionally large intensity. However, some characteristics are not accounted for by geometrical optics. In particular, the oscillatory behaviors of their scattering intensity are well described by simple two-wave interference models.     

Microassembly of semiconductor three-dimensional photonic crystals

Electronic devices and their highly integrated components formed from semiconductor crystals contain complex three-dimensional (3D) arrangements of elements and wiring. Photonic crystals, being analogous to semiconductor crystals, are expected to require a 3D structure to form successful optoelectronic devices. Here, we report a novel fabrication technology for a semiconductor 3D photonic crystal by uniting integrated circuit processing technology with micromanipulation. Four- to twenty-layered (five periods) crystals, including one with a controlled defect, for infrared wavelengths of 3-4.5 microm, were integrated at predetermined positions on a chip (structural error <50 nm). Numerical calculations revealed that a transmission peak observed at the upper frequency edge of the bandgap originated from the excitation of a resonant guided mode in the defective layers. Despite their importance, detailed discussions on the defective modes of 3D photonic crystals for such short wavelengths have not been reported before. This technology offers great potential for the production of optical wavelength photonic crystal devices.     

Determination of standard gibbs energies of formation of Cr2N and CrN

The standard Gibbs energies of formation of Cr₂N and CrN have been measured by an equilibration technique and by using thermogravimetry and differential thermal analysis (TG-DTA) at temperatures ranging from 1232 to 1523 K. The results are expressed as follows:

A novel ATP regeneration system using polyphosphate-AMP phosphotransferase and polyphosphate kinase

Polyphosphate-AMP phosphotransferase (PAP) and polyphosphate kinase (PPK) were used for designing a novel ATP regeneration system, named the PAP-PPK ATP regeneration system. PAP is an enzyme that catalyzes the phospho-conversion of AMP to ADP, and PPK catalyzes ATP formation from ADP. Both enzymes use inorganic polyphosphate [poly(P)] as a phosphate donor. In the PAP-PPK ATP regeneration system, ATP was continuously synthesized from AMP by the coupling reaction of PAP and PPK using poly(P). Poly(P) is a cheap material compared to acetyl phosphate, phosphoenol pyruvate and creatine phosphate, which are phosphate donors used for conventional ATP regeneration systems. To achieve efficient synthesis of ATP from AMP, an excessive amount of poly(P) should be added to the reaction solution because both PAP and PPK consume poly(P) as a phosphate donor. Using this ATP generation reaction, we constructed the PAP-PPK ATP regeneration system with acetyl-CoA synthase and succeeded in synthesizing acetyl-CoA from CoA, acetate and AMP. Since too much poly(P) may chelate MG2+ and inhibit enzyme activity, the Mg2+ concentration was optimized to 24 mM in the presence of 30 mM poly(P) in the reaction. In this reaction, ATP was regenerated 39.8 times from AMP, and 99.5% of CoA was converted to acetyl-CoA. In addition, since the PAP-PPK ATP regeneration system can regenerate GTP from GMP, it could also be used as a GTP regeneration system.     

Synthesis and characterization of K2NiF4-type CaLnCoO4 (Ln = Sm and Gd)

K₂NiF₄-type CaLnCoO₄ (Ln = Sm and Gd) has been synthesized at 1173 or 1223 K in air using citric acid (CA) and ethylene glycol (EG). CaLnCoO₄ (Ln = Sm and Gd) has an orthorhombic structure with the space group Bmab. The average particle sizes are approximately 300 nm for CaSmCoO₄ and approximately 170 nm for CaGdCoO₄, respectively. The global instability index (GII) indicates that the crystal structure of CaGdCoO₄ is more stable than that of CaSmCoO₄. CaLnCoO₄ (Ln = Sm and Gd) is a p-type semiconductor and shows paramagnetic behavior above 5 K. The 1/χ-T curve of CaSmCoO₄ deviates from the Curie-Weiss law, whereas the 1/χ-T curve of CaGdCoO₄ follows the Curie-Weiss law in the temperature range of 5 ≤ T ≤ 300 K. From the values of the observed effective magnetic moment (μ_eff) of CaLnCoO₄ (Ln = Sm and Gd), it is considered that the spin state of the Co³⁺ ion is low.     

COMPLEXITY RELAXATION OF THE TENSOR PRODUCT MODEL TRANSFORMATION FOR HIGHER DIMENSIONAL PROBLEMS

The Tensor Product (TP) model transformation method was proposed recently as an automated gateway between a class of non‐linear models and linear matrix inequality based control design. The core of the TP model transformation is the higher order singular value decomposition of a large sized tensor, which requires high computational power that is usually outside of a regular computer capacity in cases of higher dimensionality. This disadvantage restricts the utilization of the TP model transformation to models having smaller dimensionality. The aim of this paper is to propose a computationally relaxed version of the TP model transformation. The paper also presents a 6 dimensional example to show the effectiveness of the modified transformation.     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Hypomagnesemia as a predictor of mortality in hemodialysis patients and the role of proton pump inhibitors: A cross‐sectional, 1‐year,retrospective cohort study

Introduction This study aimed to evaluate the association between proton pump inhibitor (PPI) use and serum magnesium levels, and the role of hypomagnesemia and PPI use as a risk factor for mortality in hemodialysis patients. Methods An observational study, including a cross‐sectional and 1‐year retrospective cohort study. The study comprised 399 hemodialysis patients at a single center, and was conducted from January to September 2014. Multiple linear regression analysis was used to investigate the independent relationship between serum magnesium levels and baseline demographic and clinical variables, including PPI and histamine‐2 receptor antagonist use. Cox regression model was used to identify lower serum magnesium level and PPI as a predictor of 1‐year mortality. Findings Serum magnesium levels were lower with PPI use than non‐PPI use (2.39 ± 0.36 vs. 2.56 ± 0.39 mg/dL, P < 0.001). Multiple linear regression analysis showed that PPI use, low serum albumin levels, and low serum potassium and high‐sensitivity C‐reactive protein (hs‐CRP) levels were significantly associated with low serum magnesium levels. A total of 29 deaths occurred during the follow‐up period. According to Cox regression analysis stratified by hs‐CRP, only high serum hs‐CRP levels (>4.04 mg/L) in association with low serum magnesium levels was an independent risk factor for 1‐year mortality (hazard ratio: 2.92; 95% CI: 1.53–6.40, P < 0.001). Discussion Serum magnesium levels are lower in PPI use. In the inflammatory state, a low serum magnesium level is a significant predictor of mortality in hemodialysis patients.