Characterization of Hydroxyapatite Film on Titanium Substrate by Sputtering Technique

Radiofrequeut magnetron sputtering technique was used to produce calcium phosphate coated on the titurdum substrates, and the sputtered coating films were crystallized in an autoclave at 110℃ using a low temperature hydrothermal technique. The crystallization of as-sputtered coating film on the titanium substrates were amorphous calcium phosphate film. However, after the hydrothermal technique, calcium phosphate crystals grew and these were cohumnar crystal. The Ca/P ratio of sputtered coating films in 1.6 to 2.0.     

Importance of multiple-phonon interactions in molecular dissociation and nanofabrication using optical near fields

A quasi-particle (exciton-phonon polariton) model, as a simple model of an optical near-field probe, is proposed to investigate an unresolved problem in photochemical processes, i.e., why a vapor molecule can be dissociated by an incident photon with less energy than the dissociation energy only if, not a propagating far field, but an optical near field is used, and what is the mechanism leading to the photon flux dependence of the deposition rates. Incident photon energy and intensity dependences of Zn deposition rates are analyzed, and good agreement between the theoretical and experimental results is obtained. It suggests that the probe system plays an important role in vibrational transitions as well as electronic transitions in photodissociation processes, and that the couplings between the optical near field and molecular vibrations are enhanced to permit a nonresonant photodissociation inherent in the optical near field.     

Combinatorial pulsed laser deposition and thermoelectricity of (La1−xCax)VO3 composition-spread films

La_1−xCa_xVO₃ composition-spread film library was fabricated by combinatorial pulsed laser deposition and their thermoelectric properties were evaluated paralelly by the multi-channel probes of Seebeck coefficient and electric conductivity. Concurrent X-ray analysis verified the formation of solid soluted films in the full composition range (0x1) as judged from the linear variation of the lattice constants. The Seebeck coefficients of La_1−xCa_xVO₃ changed from a large negative value to almost zero with the increase of x, due presumably to the variation of valence in vanadium ions.The power factor in this library was as high as 0.6 μW/cm K², which was obtained at x=0, i.e. pure LaVO₃ grown at 800 °C.     

38. R&D on hydrogen production by high-temperature electrolysis of steam

One of the objectives of the high-temperature engineering test reactor (HTTR) is to demonstrate the effectiveness of high-temperature nuclear heat utilization, which aims to extend the application of nuclear heat to non-electric fields, especially to hydrogen production. As part of the development of the hydrogen production processes, laboratory-scale experiments of a high-temperature electrolysis of steam (HTES) had been carried out with a practical electrolysis tube with 12 solid-oxide cells connected in series. Using this electrolysis tube, hydrogen was produced at the maximum density of 44 N cm³/cm² h at a electrolysis temperature of 950 °C. Thereafter, to improve hydrogen production performance, a self-supporting planar electrolysis cell with a practical size (80 mm × 80 mm of electrolysis area) was fabricated. In the preliminary electrolysis experiment carried out at 850 °C, the planar cell produced hydrogen at the maximum density of 38 N cm³/cm² h, and the energy efficiency was almost as high as that obtained with the electrolysis tube at 950 °C. However, both electrolysis tubes and planar cells did not keep their integrity in one thermal cycle. Durability of the solid-oxide cell against the thermal cycle is one of the key issues of HTES.     

TRADE‐OFF BETWEEN APPROXIMATION ACCURACY AND COMPLEXITY FOR TS FUZZY MODELS

This paper proposes a transformation method that serves the trade‐off between the modelling complexity and accuracy of multi‐variable Takagi‐Sugeno fuzzy inference operator‐based modelling (TS fuzzy modelling). The relation between the number of fuzzy rules and the modelling accuracy is defined in the paper. The proposed transformation method is capable of finding the minimal number of fuzzy rules for a given accuracy of a given TS fuzzy model. A case study, focusing on a benchmark problem of fault diagnosis, developed in the framework of EC‐founded Research Training Network DAMADICS, of an actuator in a sugar factory, is presented to provide feasibility of the proposed method.     

Demonstrating nanophotonic switching using near-field pump–probe photoluminescence spectroscopy of CuCl quantum cubes

We demonstrated a novel optical switching operation using three CuCl quantum cubes with a size ratio of . Their quantized excitonic energy levels resonate with one another, and the switching mechanism was based on the resonant near‐field energy transfer between the quantum cubes. Using near‐field pump–probe photoluminescence spectroscopy, we succeeded in controlling the near‐field energy transfer and obtained a controlled (i.e. switched) signal in a differential photoluminescence spectrum with and without a pump beam. The internal quantum efficiency of the switching operation was close to 1. These results suggest the possibility of making a nanophotonic switching device smaller than 30 nm.     

The fluorescence behavior from SAM of dendron with rhodamine B as a center

We studied energy transfer between rhodamine B molecules centered in each corn-shaped dendrons that forms self-assembled monolayer (SAM) film on an Au substrate. A SAM film using dendron moiety as a spacer can change the distance between rhodamines depending on the size, so that the energy transfer from an initially photo-excited rhodamine to its surrounding molecules can be controlled. The absorption spectrum of a SAM film for each generation of dendron was measured to ascertain a linear correlation between the generation and the distance. Picosecond time-resolved fluorescence spectra showed clear differences in the fluorescence decay dynamics between third-generation (G3) and fourth-generation (G4) dendron SAM films. In addition, we found that “dry” or “wet” dendron SAM considerably influenced fluorescence behavior. As a result, the use of “wet” G4 SAM is suitable in preserving photo-excitation energy. This is because it gave almost equal dynamics to G4 dendron in the dilute solution and prevented deactivation by energy dissipation.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321     

Accelerator-driven system for transmutation of high-level waste

The accelerator-driven transmutation system has been studied at the Japan Atomic Energy Research Institute. This system is a hydrid system which consists of a high intensity accelerator, a spallation target and a subcritical core region. In the conceptual design study, two types of system concepts, sodium cooled and lead-bismuth cooled system, are being studied. In this study, we fucus on our lead-bismuth cooled accelerator-driven transmutation system to investigate basic characteristics. The fuel compositions were optimized for efficient transmutation of minor actinide. The transmutation of long-lived fission products was also considered.