A quick and simple method for the identification of meat species and meat products by PCR assay

The polymerase chain reaction (PCR) was applied to identify six meats (cattle, pig, chicken, sheep, goat and horse) as raw materials for products. By mixing seven primers in appropriate ratios, species-specific DNA fragments could be identified by only one multiplex PCR. A forward primer was designed on a conserved DNA sequence in the mitochondrial cytochrome b gene, and reverse primers on species-specific DNA sequences for each species. PCR primers were designed to give different length fragments from the six meats. The products showed species-specific DNA fragments of 157, 227, 274, 331, 398 and 439 bp from goat, chicken, cattle, sheep, pig and horse meats, respectively. Identification is possible by electrophoresis of PCR products. Cattle, pig, chicken, sheep and goat fragments were amplified from cooked meat heated at 100 or 120°C for 30 min, but horse DNA fragments could not be detected from the 120°C sample. Detection limits of the DNA samples were 0.25 ng for all meats.     

Development of novel method for screening microorganisms using symbiotic association between insect (Coptotermes formosanus Shiraki) and intestinal microorganisms

It is becoming increasingly difficult to isolate novel useful microorganisms from the natural environment using conventional screening methods based on pure culture techniques. A novel method for screening microorganisms in symbiotic association with insects was developed. This method involves the following two steps. In the first step, the existence of desired microorganisms that grow well by degrading difficult-to-degrade materials in the gut of insects is detected using the survivability of insects as an indicator. In the second step, the desired microorganisms are selected from the surviving insects. The second step is based on an idea that the guts of insects act as continuous-culture systems whereby microorganisms that cannot degrade diet components are washed out whereas those that can degrade diet components are retained and made to multiply in the gut. Coptotermes formosanus Shiraki was fed with an artificial diet containing phenol as a model of lignin-derived and difficult-to-degrade compound. Each C. formosanus feeding on an artificial diet containing 100 mg/l phenol had different levels of adaptation to the toxicity of phenol. About 20% of C. formosanus fed with an artificial diet containing 100 mg/l phenol died within a few days whereas others survived for more than 10 d. The structure of the intestinal microorganisms of the surviving C. formosanus fed with the 100 mg/l phenol artificial diet gradually changed and was very different from that of the bacterial communities obtained from the enrichment culture of wood-feeding C. formosanus using an artificial medium containing phenol as a sole carbon source. Furthermore, Only three species (as DGGE band) were detected from the gut of wood-feeding C. formosanus, whereas 200 times more phenol-degrading microorganisms were detected in the gut of C. formosanus feeding on a phenol artificial diet. Out of these nine species (as DGGE band) of phenol-degrading microorganisms were isolated. The screening method developed in this study can also be applied to various insects, leading to the isolation of various microorganisms that can degrade difficult-to-degrade compounds.     

Simplified preparation of crude and functional coagulogen by thermal inactivation of serine proteases in Limulus amebocyte lysate and its application for rapid endotoxin determination

The effects of thermal treatment on Limulus amebocyte lysate (LAL) reagent were studied. Thermal resistances of enzymes and coagulogen in LAL reagent were evaluated by aggregometry and SDS-PAGE. Although enzyme activities of LAL reagent were completely lost after heating at temperatures above 60 °C for 10 min, gelating activities of coagulogen were retained even over 80 °C. Phenylmethanesulfonyl fluoride (PMSF; 1 mmol/mL), a strong non-specific serine-protease inhibitor, did not completely inactivate serine-protease activities of LAL. As a result, complete hydrolysis of coagulogen to coagulin was unexpectedly obtained. Solvent treatment of LAL was similar in effect to thermal treatment of LAL, but there were 2 problems: complete removal of solvent from samples and increased solution turbidity during preparation. To study the application of thermal-treated LAL, we conjugated it with titania particles. LAL-conjugated titania particles were obtained as small aggregates between titania nanoparticles and thermal-treated LAL (LAL-conjugated microbeads; LCM). When the mixture of LCMs and fresh LAL reagent was reacted with endotoxin an acute aggregation of LCMs was induced prior to the aggregate formation of LAL as monitored by stirring turbidimetry. This method, endotoxin microbeads aggregometry (EMA) may provide a rapid and sensitive method for endotoxin determination.     

A study on the chromaticity shifts of blue phosphor for color plasma displays

The dependency of the chromaticity shifts on the concentration of Eu²⁺ doped in BaMgAl₁₀O₁₇ (BAM) was investigated under heat‐treatment and vacuum ultraviolet (VUV) irradiation. The Eu²⁺ ions in BAM show an asymmetrical broad emission band with a maximum at ～452 nm under excitation of VUV light at room temperature, showing that multiple crystalline cationic sites exist in the host. It was found that the chromaticity shifts greatly decrease with increasing heat‐treatment temperature. Regardless of the Eu²⁺ concentration, the chromaticity shifts caused by heat‐treatment are greater than that caused by VUV irradiation. Compared with conventional BAM, a solid solution of BAM with barium aluminate as a powder and film was also studied, and very few chromacity shifts were observed. It is suggested that the distribution of Eu²⁺ ions in different sites in a BAM lattice results in different chromaticity coordinates. By increasing the Eu²⁺ concentration in BAM, or under heat‐treatment and VUV irradiation, the emission band shifts towards longer wavelengths.     

Micromachining of electroformed nickel mold using thick photoresist microstructure for imprint technology

In order to fabricate polymer-based microstructures with feature sizes on the order of micrometers, we have been developing a microimprint technology with a fine nickel (Ni) mold instead of a conventional photolithography technique. The Ni mold was successfully fabricated by electroforming using a positive thick photoresist microstructure patterned on a silicon substrate as a replication master. The photoresist microstructure with excellent edge quality can be obtained under irradiation with single wavelength (g line) selected from a high-pressure mercury lamp. In addition, its sidewall angle in the range of 65° to 84° can be controlled precisely by varying the distance between a photomask and a photoresist surface. On the structured photoresist master, Ni was electroplated up to a thickness of about 110 μm, and then removed from the master. In this process, two-step electroplating at different current densities was carried out in order to prevent deformation of the photoresist master due to stress generated in a Ni electrodeposit. With the Ni mold, fine patterns with a width of 10 or 30 μm and a depth of 24 μm were almost completely transferred to polymetric materials (PMMA). The geometrical dimensions of the fabricated PMMA microstructures were found to be only about 10% reduction against the Ni mold.     

A straight-bladed vertical axis wind turbine with a directed guide vane row — Effect of guide vane geometry on the performance —

The objective of this study is to show the effect of guide vane geometry on the performance. In order to overcome the disadvantages of vertical axis wind turbine, a straight-bladed vertical axis wind turbine (S-VAWT) with a directed guide vane row has been proposed and tested by the authors. According to previous studies, it was clarified that the performance of the turbine can be improved by means of the directed guide vane row. However, the guide vane geometry of S-VAWT has not been optimized so far. In order to clarify the effect of guide vane geometry, the effects of setting angle and gap between rotor blade and guide vane on power coefficient and starting characteristic were investigated in the experiments. The experimental study of the proposed wind turbine was carried out by a wind tunnel. The wind tunnel with a diameter of 1.8m is open jet type. The wind velocity is 8 m/s in the experiments. The rotor has three straight blades with a profile of NACA0018 and a chord length of 100 mm, a diameter of 0.6 m and a blade height of 0.7 m. The guide vane row consists of 3 arc plates.     

Monodisperse nanoparticles of poly(ethylene glycol) macromers and N‐isopropyl acrylamide for biomedical applications

Poly(ethylene glycol)‐based nanoparticles have received significant attention in the field of biomedicine. When they are copolymerized with pH‐ or temperature‐sensitive comonomers, their small size allows them to respond very quickly to changes in the environment, including changes in the pH, ionic strength, and temperature. In addition, the high surface‐to‐volume ratio makes them highly functionalized. In this work, nanoparticles composed of temperature‐sensitive poly(N‐isopropylacrylamide), poly(ethylene glycol) 400 dimethacrylate, and poly(ethylene glycol) 1000 methacrylate were prepared by a thermally initiated, free‐radical dispersion polymerization method. The temperature‐responsive behavior of the hydrogel nanoparticles was characterized by the study of their particle size with photon correlation spectroscopy. The size of the nanoparticles varied from 200 to 1100 nm and was a strong function of the temperature of the system, from 5 to 40°C. The thermal, structural, and morphological characteristics were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1678–1684, 2003     

Miscibility and crystallization behavior of poly(ether ether ketone ketone)/poly(ether imide) blends

The miscibility and crystallization behavior of poly(ether ether ketone ketone) (PEEKK)/poly(ether imide) (PEI) blends prepared by melt‐mixing were investigated by differential scanning calorimetry. The blends showed a single glass transition temperature, which increased with increasing PEI content, indicating that PEEKK and PEI are completely miscible in the amorphous phase over the studied composition range (weight ratio: 90/10–60/40). The cold crystallization of PEEKK blended with PEI was retarded by the presence of PEI, as is apparent from the increase of the cold crystallization temperature and decrease of the normalized crystallinity for the samples anealed at 300°C with increasing PEI content. Although the depression of the apparent melting temperature of PEEKK blended with PEI was observed, there was no evidence of depression in the equilibrium melting temperature. The analysis of the isothermal crystallization at 313–321°C from the melt of PEEKK/PEI (100/0, 90/10, and 80/20) blends suggested that the retardation of crystallization of PEEKK is caused by the increase of the crystal surface free energy in addition to the decrease of the mobility by blending PEI with a high glass transition temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 769–775, 2001