Alignment control of liquid crystals in a 1.0‐μm‐pitch spatial light modulator by lattice‐shaped dielectric wall structure

We achieved uniform liquid crystal (LC) alignment in lattice‐shaped dielectric walls 1 μm in pitch; this is a prerequisite when driving the individual pixels of spatial light modulators, facilitating the development of practical electronic holographic displays with a wide field of view. In lattice‐shaped dielectric walls, LC alignment becomes unstable, particularly on the bottom and the walls; the LC directors tend to align parallel to the walls. To overcome this problem, we created lattice‐shaped walls featuring partition plates that allow uniform LC alignment. When the plates confine LCs to small regions exhibiting spatial anisotropy, the LC elastic effect and wall anchoring forces align the LC directors parallel to the long anisotropic axis. We found that pixels 0.5 μm × 1.0 μm in pitch formed if the partition plates were sufficiently thick to allow shielding of electric field leakage.     

Mutants of the nematode Caenorhabditis elegans that are defective specifically in their attraction to cycloheximide

The nematode Caenorhabditis elegans exhibits chemotaxis toward a wide variety of chemicals including water-soluble molecules and volatile organic compounds. We have previously discovered that C. elegans wild-type strain N2 is strongly attracted by cycloheximide which has long been known as a bitter tastant for humans and other mammals. We describe here the isolation and initial characterization of the first mutants which were defective specifically in their attraction to cycloheximide. In our screenings, we selected two mutants that were defective in chemotaxis to cycloheximide but normal in their attraction to NH4Cl and histidine. These mutants also avoided quinine hydrochloride, CuSO4 and high concentrations of NaCl similar to the wild-type strain N2. Furthermore, no observable defect was detected in their attraction to volatile odorants such as isoamyl alcohol and diacetyl. Dye-filling experiments suggested that they have no morphological defect in the sensory endings of the amphid neurons.     

Cloning, sequencing and expression of an alpha-L-arabinofuranosidase from Aspergillus sojae

The arabinofuranosidase gene was cloned from the cDNA of Aspergillus sojae. It was found to contain an open reading frame composed of 984 base pairs (bp) and to encode 328 amino acid residues (aa). The cDNA sequence suggested that the mature enzyme is preceded by a 26-aa signal sequence and the molecular mass was predicted to be 32,749 Da. The A. sojae arabinofuranosidase consists of a single catalytic domain; it does not have a specific substrate-binding domain such as the xylan-binding domain reported in an arabinofuranosidase from Streptomyces lividans (Vincent, P. et al.: Biochem. J., 322, 845-852, 1997). The deduced amino acid sequence of the catalytic domain of the mature enzyme exhibits extensive identity with the catalytic domains of Streptomyces coelicolor (74%), Aspergillus niger (75%), S. lividans (74%), and Aspergillus tubingensis (75%), which are enzymes that belong to family 62 of the glycosyl hydrolases. The cloned AFdase gene was expressed in Escherichia coli BL21 (DE3) pLysS as a cellulose-binding domain tag fusion protein. The specific activity of the purified recombinant enzyme was 18.6 units/mg protein, which is one-fourth that of the enzyme purified from a solid-state culture of A. sojae.     

Development of a fed-batch culture process for enhanced production of recombinant human antithrombin by Chinese hamster ovary cells

Antithrombin is a serine protease inhibitor that inactivates several coagulation proteases, primarily thrombin and factor Xa. The Chinese hamster ovary (CHO) cell line transfected with a vector expressing recombinant human antithrombin (rAT) and a selectable marker, glutamine synthetase (GS), was cultivated in a 2-l fed-batch culture process using serum-free, glutamine-free medium. To maximize the rAT yield, effects of culture pH, balanced amino acid feeding, and an increased glutamate concentration on cell metabolism and rAT production were investigated. When cells were grown at pH values of 6.6, 6.8, 7.0, and 7.2, the maximum cell density and maximum lactate concentration decreased with decreasing pH. The highest production level of rAT was obtained at culture pH 6.8 due to the extended culture lifetime. Compared to the imbalanced amino acid feeding at culture pH 6.8, the balanced amino acid feeding increased the amount of rAT activity by 30% as a result of an increased viable cell number. A decrease in the specific glucose consumption rate (q(Glc)) with increasing culture time was observed in all the above-mentioned experiments, while the glucose concentration was maintained above 0.7 g l(-1). In addition, a decrease in the specific rAT production rate (q(rAT)) was observed after the depletion of lactate in the late cultivation stage. Taken together, these results suggest that the reduced availability of cellular energy caused by the decrease in q(Glc) and depletion of lactate led to the decrease in q(rAT). This decrease in q(rAT) was partially prevented by increasing the residual glutamate concentration from 1 mM to 7 mM, thus resulting in an additional 30% increase in the amount of rAT activity. The optimized fed-batch culture process yielded 1.0 g l(-1) rAT at 287 h of cultivation.     

Lethality of the covalent linkage between mislocalized major outer membrane lipoprotein and the peptidoglycan of Escherichia coli

The major outer membrane lipoprotein (Lpp) of Escherichia coli possesses serine at position 2, which is thought to function as the outer membrane sorting signal, and lysine at the C terminus, through which Lpp covalently associates with peptidoglycan. Arginine (R) is present before the C-terminal lysine in the wild-type Lpp (LppSK). By replacing serine (S) at position 2 with aspartate (D), the putative inner membrane sorting signal, and by deleting lysine (K) at the C terminus, Lpp mutants with a different residue at either position 2 (LppDK) or the C terminus (LppSR) or both (LppDR) were constructed. Expression of LppSR and LppDR little affected the growth of E. coli. In contrast, the number of viable cells immediately decreased when LppDK was expressed. Prolonged expression of LppDK inhibited separation of the inner and outer membranes by sucrose density gradient centrifugation, whereas short-term expression did not. Pulse-labeled LppDK and LppDR were localized in the inner membrane, indicating that the amino acid residue at position 2 functions as a sorting signal for the membrane localization of Lpp. LppDK accumulated in the inner membrane covalently associated with the peptidoglycan and thus prevented the separation of the two membranes. Globomycin, an inhibitor of lipoprotein-specific signal peptidase II, was lethal for E. coli only when Lpp possessed the C-terminal lysine. Taken together, these results indicate that the inner membrane accumulation of Lpp per se is not lethal for E. coli. Instead, a covalent linkage between the inner membrane Lpp having the C-terminal lysine and the peptidoglycan is lethal for E. coli, presumably due to the disruption of the cell surface integrity.     

Novel flexible network polymers consisting of oligomeric primary polymer chains originated in the mechanistic discussion of multiallyl crosslinking polymerization

Summary It is well known that allyl monomers polymerize only with difficulty and yield polymers having low molecular weights, i.e., oligomers. Inevitably, free-radical multiallyl crosslinking polymerization provides network polymers consisting of oligomeric primary polymer chains, i.e., having abundant dangling chains. This led to the development of novel flexible network polymers such as amphiphilic network polymers (I) consisting of short primary polymer chains and long crosslink units with opposite polarities, simultaneous interpenetrating networks (II) consisting of both polyurethane (PU) and polymethacrylate (PM) networks with oligomeric primary polymer chains, and network polymers (III) consisting of centipede-type primary polymer chains. Thus, the solution copolymerizations of benzyl methacrylate with tricosaethylene glycol dimethacrylate in the presence of lauryl mercaptan yielded I consisting of nonpolar, short primary polymer chains and polar, long crosslink units. The opposite type of I was prepared by the copolymerization of 2-hydroxyethyl methacrylate, a polar monomer having a hydroxyl group, with heneicosapropylene glycol dimethacrylate, a nonpolar monomer having a poly(oxypropylene) unit. The equimolar polyaddition crosslinking reaction of poly(methyl methacrylate-co-2-methacryloyloxyethyl isocyanate) with tri(oxytetramethylene) glycol, leading to PU networks, and the free-radical crosslinking copolymerization of methyl methacrylate with tri(oxytetramethylene) dimethacrylate in the presence of CBr₄, leading to PM networks, were progressed simultaneously, providing II formed via the topological crosslink between PU and PM network structures. The post-copolymerizations of oligomeric allyl methacrylate/alkyl methacrylate precopolymers, having different amounts of pendant allyl groups and different molecular weights, with allyl benzoate/vinyl benzoate monomer mixtures were conducted to give III.     

Epitaxially grown free-standing diamond platelet

We obtained an epitaxially grown free-standing diamond platelet utilizing epitaxial diamond film formed on a {100} iridium surface using a d.c. plasma CVD process. Iridium was selected as a suitable substrate material for the heteroepitaxy of diamond based on original criteria. Confocal Raman spectroscopy revealed that the diamond platelet contained little or no non-diamond carbon. The obtained diamond platelet is transparent to visible light and cleavable along the 110 direction on the surface. The angles between the top surface and the cross-sectional surfaces are approximately 55°, almost equal to the theoretical angle of 54.74° between {100} and {111} planes in cubic crystals. Therefore, the cross-sectional surfaces would be {111} planes of a typical facet for single-crystalline diamond. This means that the diamond platelet we have formed has relatively good crystallinity.     

Temperature and Stress Distributions in a Hollow Cylinder of Functionally Graded Material: The Case of Temperature-Independent Material Properties

We have presented a numerical technique for analyzing one-dimensional transient temperature distributions in a circular hollow cylinder that was composed of functionally graded ceramic–metal-based materials, without considering the temperature-dependent material properties. The functionally graded material (FGM) cylinder was assumed to be initially in a steady state of gradient temperature; the ceramic inner surface was exposed to high temperature, and the metallic outer surface, which was associated with its in-service performance, was exposed to low temperature. Then, the FGM cylinder was cooled rapidly on the ceramic surface of the cylinder, using a cold medium. The transient temperature and related thermal stresses in the FGM cylinder were analyzed numerically for a model of the mullite–molybdenum FGM system. The technique for analyzing the temperature distribution is quite simple and widely applicable for various boundary conditions of FGMs, in comparison with methods that have been proposed recently by other researchers.     

Effect of the addition of NH4F on anodic behaviors of DSA-type electrodes in H2SO4-(NH4)2SO4 solutions

The effect of NH₄F addition on the high-anodic behaviors of various DSA-type electrodes was investigated in a mixture of sulfuric acid and ammonium sulfate. The pronounced effect of NH₄ addition was observed on DSA-type Ti/RuO₂, Ti/IrO₂?TiO₂ electrodes, but not observed on the other electrodes studied. The close relationship was found between the increment of the electrode potential caused by the NH₄ addition and the quantity of F^? adsorbed on the electrode surface. The effect of NH₄F addition was considered to be resulted from the adsorption of F^? on the electrode surface, and the presence of adsorbed F^? was directly proved.