Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE

The feasibility of a solid polymer electrolyte (SPE) method for Kolbe type reactions was investigated by using Pt-SPE composed with Nafion 415 and platinum. The Kolbe reaction of acetic acid proceeded effectively on one side and both sides Pt-SPE composites. The lower current efficiency was observed on the latter than on the former. Neat acetic acid could also be electrolysed on both sides SPE though the cell voltage was fairly high.A methanolic solution of monomethyl adipate was electrolysed to give dimethyl sebacate on both sides Pt-SPE according to the Brown-Walker reaction. The current efficiency and the terminal voltage increased with the concentration of monomethyl adipate. Pt-SPE behaved as an active electrode of a high roughness factor, eg about 6, for the Kolbe reaction of acetate.     

One Pot Cooking of Rice Grains for Preparation of Rice-Gel Samples Using a Small-Scale Viscosity Analyzer: Small-scale Rice-gel Preparation from Grains

Rice-gel prepared by the following three steps: rice grain cooking, shearing of the cooked rice, and cooling for gel formation, is expected as a novel food ingredient for modification of various food products such as bread and noodles. To meet the demand for high-throughput systems for research and developments on the new rice gels, herein we established a mini-cooking system for preparation of rice gel samples from grains using a small-scale viscosity analyzer (Rapid Visco Analyzer; RVA). Polished rice grains (4 g) were cooked with 22 mL of water in a canister, and the paddle equipped in the canister was rotated at 2,000 rpm for 30 min (80 °C was used as a representative) to shear the cooked rice. The sheared paste was cooled to 10 °C at 160 rpm, and the initial gelation property was evaluated by viscosity analysis within the RVA. Alternatively, the sheared paste was transferred to an acrylic mold and kept at 4 °C for 0, 1, 3, and 5 days for determination of the hardness with a compression test. Compressive forces required to penetrate 20 % thickness for three tested rice cultivars were measured, and the trend of the value shifts during preservation is similar to the corresponding trend obtained in 300-g grain scale laboratory tests, whereas the individual values were halved in the former. This small cooking method could offer a useful assay system for a rapid evaluation in the breeding programs and in the high-throughput screening of additives for the modification of properties.     

Development of a fed-batch culture process for enhanced production of recombinant human antithrombin by Chinese hamster ovary cells

Antithrombin is a serine protease inhibitor that inactivates several coagulation proteases, primarily thrombin and factor Xa. The Chinese hamster ovary (CHO) cell line transfected with a vector expressing recombinant human antithrombin (rAT) and a selectable marker, glutamine synthetase (GS), was cultivated in a 2-l fed-batch culture process using serum-free, glutamine-free medium. To maximize the rAT yield, effects of culture pH, balanced amino acid feeding, and an increased glutamate concentration on cell metabolism and rAT production were investigated. When cells were grown at pH values of 6.6, 6.8, 7.0, and 7.2, the maximum cell density and maximum lactate concentration decreased with decreasing pH. The highest production level of rAT was obtained at culture pH 6.8 due to the extended culture lifetime. Compared to the imbalanced amino acid feeding at culture pH 6.8, the balanced amino acid feeding increased the amount of rAT activity by 30% as a result of an increased viable cell number. A decrease in the specific glucose consumption rate (q(Glc)) with increasing culture time was observed in all the above-mentioned experiments, while the glucose concentration was maintained above 0.7 g l(-1). In addition, a decrease in the specific rAT production rate (q(rAT)) was observed after the depletion of lactate in the late cultivation stage. Taken together, these results suggest that the reduced availability of cellular energy caused by the decrease in q(Glc) and depletion of lactate led to the decrease in q(rAT). This decrease in q(rAT) was partially prevented by increasing the residual glutamate concentration from 1 mM to 7 mM, thus resulting in an additional 30% increase in the amount of rAT activity. The optimized fed-batch culture process yielded 1.0 g l(-1) rAT at 287 h of cultivation.     

Improvements in the cell-free production of functional antibodies using cell extract from protease-deficient Escherichia coli mutant

Expression of a functional antibody fragment (Fab) using an Escherichia coli cell-free expression system has been reported previously [Jiang et al., FEBS Lett., 514, 290-294 (2002)]. The low yield of the synthesized antibody, however, limits the usefulness of the cell-free expression system, partly due to the degradation of product by endogenous proteases from the E. coli extract. To determine which proteases are responsible for the degradation, we compared the expression of a 6D9 Fab fragment under conditions whereby several protease inhibitors were added into the cell-free system. The addition of serine protease inhibitor increased the amount of the Fab fragment, indicating that serine proteases caused the antibody degradation. Therefore, several serine protease-deficient mutants of E. coli BW25113 were constructed by targeted homologous recombination. The use of extract from a double protease-deficient mutant (DeltadegP-ompT) significantly increased the amount and antigen-binding activities of an anti-HSA scFv and a 6D9 Fab fragment. These results suggest that the DegP- and OmpT-deleted mutant is a useful source of S30 extract for the production or screening of antibodies using the cell-free expression system.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Interactive visualization of three-dimensional magnetic fields

In order to observe the physical values (magnetic flux density and eddy current) in 3D magnetic field analysis, an interactive and highly manipulative visualization system depicting stereo images is intalled in a graphics workstation with high functional graphic processors. The system has the following characteristics:

• 1 An interactive and highly manipulative menu window with many functions: it enables visualization of complex phenomena in a 3D field through observation of various combinations of physical values from various viewpoints.
• 2 Simultaneous display of both magnetic flux density and eddy current by using the appropriate use of two colour display methods for stream lines and distribution maps of density: this function facilitates observation of the mutual relations between two physical values in a 3D field.
• 3 Animations and stereo displays: since they give extremely distinct images, observers can easily understand even highly complex 3D phenomena.

In this paper, the calculation method of density vectors, their display methods, and interactive functions are described. Some examples are also illustrated.     

Effect of the addition of NH4F on anodic behaviors of DSA-type electrodes in H2SO4-(NH4)2SO4 solutions

The effect of NH₄F addition on the high-anodic behaviors of various DSA-type electrodes was investigated in a mixture of sulfuric acid and ammonium sulfate. The pronounced effect of NH₄ addition was observed on DSA-type Ti/RuO₂, Ti/IrO₂?TiO₂ electrodes, but not observed on the other electrodes studied. The close relationship was found between the increment of the electrode potential caused by the NH₄ addition and the quantity of F^? adsorbed on the electrode surface. The effect of NH₄F addition was considered to be resulted from the adsorption of F^? on the electrode surface, and the presence of adsorbed F^? was directly proved.