Upward vertical two-phase flow local flow regime identification using neural network techniques

Traditionally, the flow regimes in two-phase flow are considered in a global sense. However, a local flow regime is required to understand and model the interfacial structures present in the flow. In this work, a new approach has been used to identify both global and local flow regimes in a two-phase upward flow in a 50.8 mm internal diameter pipe under adiabatic conditions. In the present method, the bubble chord length distributions, which are measured simultaneously with three double-sensor conductivity probes, have been used to feed a self-organized neural network. The global flow regime identification results show a reasonable agreement with the visual observation for all the flow conditions. Nonetheless, only the local flow regimes measured at the center of the pipe agree with the global ones. The local flow regime combinations found are analyzed using the flow map information, cross-correlations between the probe signals, and previous correlations. In this way, it is possible to identify eight different global flow regime configurations.     

Optical properties of colloidal crystalline arrays composed of hollow polystyrene spheres

We have evaluated the optical properties of close‐packed and non close‐packed colloidal crystalline arrays made of hollow polystyrene spheres. Close‐packed colloidal crystalline arrays were fabricated by simple evaporation of dispersions, whereas nonclose‐packed colloidal crystalline arrays were fabricated by exploiting electrostatic interactions between the spheres in aqueous dispersion. Optical properties of the arrays were estimated from angle‐resolved reflection spectra. The Bragg diffraction peak of the colloidal crystalline array made of hollow spheres was of shorter wavelength than in the case of solid spheres, not only for the close‐packed array but also for the nonclose‐packed array. These shifts were caused by a decrease in the effective refractive index n_eff with decreasing particle refractive index. We have found that this relationship could be explained by the simple equation n_eff = n_particle?+ n_solvent (1 ? ?), where ? is the volume fraction of the particles, for both close‐packed and non close‐packed arrays. The current work suggests new possibilities for the creation of advanced colloidal crystals. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2364–2368, 2007     

A poly-silicon TFT with a sub-5-nm thick channel for low-power gain cell memory in mobile applications

This work presents a gain-cell solution in which a novel ultrathin polysilicon film transistor provides the basis for dense and low-power embedded random-access memory (RAM). This is made possible by the new transistor's 2-nm-thick channel, which realizes a quantum-confinement effect that produces a low leakage current value of only 10/sup -19/ A at room temperature. The memory has the potential to solve the power and stability problems that static RAM (SRAM) is going to face in the very near future.     

Batch foam separation of a soluble protein

Removal of protein dissolved in water by batch foam separation was conducted with using ovalbumin (OA) as a model protein in the light of wastewater treatment reducing organic loading. The removal efficiency had a maximum value near the i.e.p. of OA (pH 4.6); thus, most experiments were conducted at pH 4.6. Typical experimental conditions; superficial gas velocity, U(g): 1.97 x 10(-2)-5.37 x 10(-2)cm/s; initial bulk concentration of OA, C(i): ca. 0.05-0.25 g/L; liquid volume, V: 600 cm(3). A model estimating bulk concentration profile was proposed by taking into account a mass balance of the present system. The model predicted that OA could be removed perfectly, however, was not all removed experimentally. The residual OA concentration of the bulk liquid within the column reached plateau value, which correspond to ca. 18% of the initial OA concentration. The plateau value of the bulk concentration was attained for ca. 100-500 min with U(g)=1.97 x 10(-2)-5.37 x 10(-2)cm/s. Foaming ability test revealed that the foaming limit concentration of OA at pH 4.6 was 9.72 x 10(-3)g/L. These results suggested that OA molecules could be damaged by interaction of bubble surface in the dispersed phase, since there were the residual OA concentrations over the limit concentration. To take account of this phenomena and correct the model, average surface density, X(d), which should convert protein molecule into the denatured protein molecule, was introduced. The corrected model could explain well the time profile of OA bulk concentration.     

Population structure of Cladophora-borne Escherichia coli in nearshore water of Lake Michigan

We previously reported that the macrophytic green alga Cladophora harbors high densities (up to 10(6) colony-forming units/g dry weight) of the fecal indicator bacteria, Escherichia coli and enterococci, in shoreline waters of Lake Michigan. However, the population structure and genetic relatedness of Cladophora-borne indicator bacteria remain poorly understood. In this study, 835 E. coli isolates were collected from Cladophora tufts (mats) growing on rocks from a breakwater located within the Indiana Dunes National Lakeshore in northwest Indiana. The horizontal fluorophore enhanced rep-PCR (HFERP) DNA fingerprinting technique was used to determine the genetic relatedness of the isolates to each other and to those in a library of E. coli DNA fingerprints. While the E. coli isolates from Cladophora showed a high degree of genetic relatedness (92% similarity), in most cases, however, the isolates were genetically distinct. The Shannon diversity index for the population was very high (5.39). Both spatial and temporal influences contributed to the genetic diversity. There was a strong association of isolate genotypes by location (79% and 80% for lake- and ditch-side samplings, respectively), and isolates collected from 2002 were distinctly different from those obtained in 2003. Cladophora-borne E. coli isolates represented a unique group, which was distinct from other E. coli isolates in the DNA fingerprint library tested. Taken together, these results indicate that E. coli strains associated with Cladophora may be a recurring source of indicator bacteria to the nearshore beach.     

Biosynthesis of p-anisaldehyde by the white-rot basidiomycete Pleurotus ostreatus

The white-rot basidiomycete Pleurotus ostreatus produced sweet flavor compounds on a liquid medium. The major and minor compounds identified by GC-MS analysis were p-anisaldehyde (4-methoxybenzaldehyde) and 3-chloro-p-anisaldehyde (3-chloro-4-methoxybenzaldehyde), respectively. p-Anisaldehyde was only produced under static culture conditions. Differences in the type and quantity of flavor compounds produced among wild strains of P. ostreatus were observed. Aryl alcohol oxidase and manganese peroxidase activities increased parallel to the production of p-anisaldehyde. These results indicated that the biosynthesis of p-anisaldehyde is concerned in generating H2O2-activated peroxidase in the lignin-degradation system. Addition of L-tyrosine to the culture led to higher production of p-anisaldehyde. The flavor extract, which contains p-anisaldehyde, exhibited antimicrobial activity against Bacillus subtilis, Pseudomonas aeruginosa, Aspergillus niger and Fusarium oxysporum.     

An 0.03 μm gate-length enhancement-mode InAlAs/InGaAs/InPMODFET's with 300 GHz fT and 2 S/mm extrinsictransconductance

We have developed high-performance enhancement-mode InP-based modulation-doped field-effect transistors with 0.03 μm gate-length. A record high current gain cutoff frequency exceeding 300 GHz has been achieved, and the maximum extrinsic transconductance is as high as 2 S/mm with an associated drain current of 0.5 A/mm at a drain bias of 1 V. This high performance is a result of the reduction or gate length, the use of the high barrier metal Pt as gate electrodes, and most importantly the employment of the well-developed wet-etching technology that allows the formation of a very deep gate groove while retaining small side etching. The excellent E-MODFET performance opens up the possibility of implementing ever faster high-speed circuits based on direct-coupled FET logic     

Development of an in-air RBS technique using a metal capillary

We have developed a simple Rutherford backscattering spectroscopic (RBS) method to analyze sample depth profiles in air. To avoid excessive energy loss of projectile ions in air, we have used a 3 MeV proton beam extracted into air with a metal capillary. Using this capillary, we were able to extract a sufficiently large proton beam current to perform in-air RBS and in-air PIXE without requiring any window, such as a thin film, between a vacuum chamber and air. We have validated our technique by analyzing the depth profiles for Au foils of various thicknesses, 0.25, 0.75, and 2.5 μm. A comparison of the experimental results with a simple theoretical calculation indicates that this technique is useful for analyzing the depth profile of any specimen in air.     

Incremental learning methods with retrieving of interfered patterns

There are many cases when a neural-network-based system must memorize some new patterns incrementally. However, if the network learns the new patterns only by referring to them, it probably forgets old memorized patterns, since parameters in the network usually correlate not only to the old memories but also to the new patterns. A certain way to avoid the loss of memories is to learn the new patterns with all memorized patterns. It needs, however, a large computational power. To solve this problem, we propose incremental learning methods with retrieval of interfered patterns (ILRI). In these methods, the system employs a modified version of a resource allocating network (RAN) which is one variation of a generalized radial basis function (GRBF). In ILRI, the RAN learns new patterns with a relearning of a few number of retrieved past patterns that are interfered with the incremental learning. We construct ILRI in two steps. In the first step, we construct a system which searches the interfered patterns from past input patterns stored in a database. In the second step, we improve the first system in such a way that the system does not need the database. In this case, the system regenerates the input patterns approximately in a random manner. The simulation results show that these two systems have almost the same ability, and the generalization ability is higher than other similar systems using neural networks and k-nearest neighbors.     

Effects of CdS buffer layers on photoluminescence properties of Cu(In,Ga)Se2 solar cells

Photoluminescence (PL) have been studied on Cu(In,Ga)Se₂ (CIGS) thin films, CdS/CIGS and CIGS solar cells, to clarify the carrier recombination process. The chemical-bath deposition (CBD) of the CdS buffer layer on the CIGS thin film leads to (i) the enhancement of near-band-edge PL intensity by a factor of 2–3, (ii) change in energy of the defect-related PL and (iii) the slight change in the decay time. They are related not only to the minimization of the surface recombination but also to the modification of native defects at the Cu-poor surface of CIGS by the occupation of Cd atom at the Cu site. A donor–acceptor pair PL at low-temperature and temperature-dependent PL have been studied. They are discussed in terms of the impurity and defect levels created in the CIGS film during the CBD-CdS process.