Part 7. Effects of poly(L‐lactide‐co‐ϵ‐caprolactone) on morphology,structure, crystallization,and physical properties of blends of poly(L‐lactide) and poly(ϵ‐caprolactone)

Blended films of poly(L ‐lactide) [ie poly(L ‐lactic acid)] (PLLA) and poly(?‐caprolactone) (PCL) without or mixed with 10 wt% poly(L ‐lactide‐co‐?‐caprolactone) (PLLA‐CL) were prepared by solution‐casting. The effects of PLLA‐CL on the morphology, phase structure, crystallization, and mechanical properties of films have been investigated using polarization optical microscopy, scanning electron microscopy, differential scanning calorimetry and tensile testing. Addition of PLLA‐CL decreased number densities of spherulites in PLLA and PCL films, and improved the observability of spherulites and the smoothness of cross‐section of the PLLA/PCL blend film. The melting temperatures (T_m) of PLLA and PCL in the films remained unchanged upon addition of PLLA‐CL, while the crystallinities of PLLA and PCL increased at PLLA contents [X_PLLA = weight of PLLA/(weight of PLLA and PCL)] of 0.4–0.7 and at most of the X_PLLA values, respectively. The addition of PLLA‐CL improved the tensile strength and the Young modulus of the films at X_PLLA of 0.5–0.8 and of 0–0.1 and 0.5–0.8, respectively, and the elongation at break of the films at all the X_PLLA values. These findings strongly suggest that PLLA‐CL was miscible with PLLA and PCL, and that the dissolved PLLA‐CL in PLLA‐rich and PCL‐rich phases increased the compatibility between these two phases. © 2003 Society of Chemical Industry     

Membrane formation via thermally induced phase separation in polypropylene/polybutene/diluent system

Porous membranes were prepared from a polymer blend system by the thermally induced phase separation (TIPS) process. The polymer blend system was isotactic polypropylene (iPP)/polybutene (PB) and the diluent was diphenyl ether (DPE). Two types of porous membranes were prepared by the extractions of DPE alone and both DPE and PB after the phase separation. The effect of the addition of PB to the iPP solution on the phase diagram was investigated and the phase separation kinetics was measured by the light scattering method. The addition of PB resulted in the higher solute rejection property and lower water permeance. By the further extraction of PB from the porous iPP/PB membrane prepared by the extraction of DPE, the water permeance was approximately doubled, maintaining almost the same rejection property. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1701–1708, 2002; DOI 10.1002/app.10550     

Oxidation kinetics of β-carotene in oleic acid solvent with addition of an antioxidant, α-tocopherol

Oxidation experiments with β-carotene were performed in oleic acid solvent with addition of an antioxidant, α-tocopherol. A kinetic model was proposed based on a reaction mechanism consisting of the oxidation of β-carotene, oleic acid, and α-tocopherol; the antioxidation reactions of β-carotene and oleic acid by α-tocopherol; the cross-reaction of β-carotene and oleic acid; and the radical-exchange reaction of β-carotene and α-tocopherol. The model quantitatively described the oxidation behavior of β-carotene over a wide range of temperatures, oxygen compositions, and initial antioxidant concentrations. The model simulated well the time over which β-carotene was almost totally consumed under practical storage conditions at room temperature in air.     

Characterization of random and multiblock copolymers of highly sulfonated poly(arylene ether sulfone) for a proton‐exchange membrane

Random and multiblock copolymers of sulfonated poly(arylene ether sulfone) (SPAES) were synthesized and characterized to compare the differences in the properties of proton‐exchange membranes made with random and multiblock SPAES copolymers. Atomic force microscopy observations and small‐angle X‐ray scattering measurements suggested the presence of nanoscale, clusterlike structures in the multiblock SPAES copolymers but not in the random SPAES copolymers. Proton‐exchange membranes were prepared from random and multiblock copolymers with various ion‐exchange capacities (IECs). The water uptake, proton conductivity, and methanol permeability of the SPAES membranes depended on the IECs of the random and multiblock SPAES copolymers. At the same IEC, the multiblock SPAES copolymers exhibited higher performances with respect to proton conductivity and proton/methanol permeation selectivity than the random SPAES copolymers. The higher performances of the multiblock SPAES copolymers were thought to be due to their clusterlike structure, which was similar to the ionic cluster of a Nafion membrane. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Improvement of wettability of hydrophobic films by impregnation of anthraquinone attached to polyoxyethylene glycol

Amphiphilic anthraquinone bearing polyoxyethylene moiety (PEG_MW‐AQ) was prepared and impregnated in polyethylene terephthalate (PET) and nylon 6 (ON) films. The uptake of PEG_MW‐AQ to PET film increased in proportion to the concentration of PEG_MW‐AQ in a bath, and the contact angle of water dropped on the film decreased with increase in the uptake. At a constant uptake of PEG_MW‐AQ, the contact angle decreased with an increase of molecular weight of PEG_MW attached to the anthraquinone, which indicates that polyoxyethylene moiety of PEG_MW‐AQ is effective on the wettability of the film. The decrement of water contact angle on PET film dyed with PEG_MW‐AQ was larger than that on ON film at the same dye uptake because of the higher dyeability of PET film than ON film with PEG_MW‐AQ. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 545–549, 2005     

Stereocomplex formation between poly(L‐lactic acid) and poly(D‐lactic acid) with disproportionately low and high molecular weights from the melt

Poly(L ‐lactic acid) (PLLA) and poly(D ‐lactic acid) (PDLA) with very different weight‐average molecular weights (M_w) of 4.0 × 10³ and 7.0 × 10⁵ g mol^?1 (M_w(PDLA)/M_w(PLLA) = 175) were blended at different PDLA weight ratios (X_D = PDLA weight/blend weight) and their crystallization from the melt was investigated. The presence of low molecular weight PLLA facilitated the stereocomplexation and thereby lowered the cold crystallization temperature (T_cc) for non‐isothermal crystallization during heating and elevated the radial growth rate of spherulites (G) for isothermal crystallization, irrespective of X_D. The orientation of lamellae in the spherulites was higher for the neat PLLA, PDLA and an equimolar blend than for the non‐equimolar blends. It was found that the orientation of lamellae in the blends was maintained by the stereocomplex (SC) crystallites. Although the G values are expected to decrease with an increase in X_D or the content of high‐molecular‐weight PDLA with lower chain mobility compared with that of low‐molecular‐weight PLLA, G was highest at X_D = 0.5 where the maximum amount of SC crystallites was formed and the G values were very similar for X_D = 0.4 and X_D = 0.6 with the same enantiomeric excess. This means that the effect of SC crystallites overwhelmed that of chain mobility. The nucleating mechanisms of SC crystallites were identical for X_D = 0.1–0.5 in the T_c range 130–180 °C. Copyright © 2011 Society of Chemical Industry     

Porous biodegradable polyesters. I. Preparation of porous poly(L‐lactide) films by extraction of poly(ethylene oxide) from their blends

Porous poly(L ‐lactide) (PLLA) films were prepared by water extraction of poly(ethylene oxide) (PEO) from solution‐cast PLLA and PEO blend films. The dependence of blend ratio and molecular weight of PEO on the porosity and pore size of films was investigated by gravimetry and scanning electron microscopy. The film porosity and extracted weight ratio were in good agreement with the expected for porous films prepared using PEO of low molecular weight (M_w = 1 × 10³), but shifted to lower values than expected when high molecular weight PEO (M_w = 1 × 10⁵) was utilized. The maximum pore size was larger for porous films prepared from PEO having higher molecular weight, when compared at the same blending ratio of PLLA and PEO before water extraction. Differential scanning calorimetry of as‐cast PLLA and PEO blend films revealed that PLLA and PEO were phase‐separated at least after solvent evaporation. On the other hand, comparison of blend films before and after extraction suggested that a small amount of PEO was trapped in the amorphous region between PLLA crystallites even after water extraction and hindered PLLA crystallization during solvent evaporation. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 629–637, 2000