Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Emulation of complex open quantum systems using superconducting qubits

With quantum computers being out of reach for now, quantum simulators are alternative devices for efficient and accurate simulation of problems that are challenging to tackle using conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing “hybrid” simulators by combining both techniques. Here we focus on analog quantum simulators of open quantum systems and address the limit that they can beat classical computers. In particular, as an example, we discuss simulation of the chlorosome light-harvesting antenna from green sulfur bacteria with over 250 phonon modes coupled to each electronic state. Furthermore, we propose physical setups that can be used to reproduce the quantum dynamics of a standard and multiple-mode Holstein model. The proposed scheme is based on currently available technology of superconducting circuits consist of flux qubits and quantum oscillators.     

Increase in the amount of erythrocyte delta-aminolevulinic acid dehydratase in workers with moderate lead exposure

This report summarizes our current understanding of the heavy chain haplotypes found in our laboratories' rabbits. Independently derived data from several laboratories have been synthesizes into a consistent picture of the linked inheritance of allotypic markers found on the different heavy chain classes and subclasses of rabbit immunoglobulins in pedigreed rabbits, including the families of three apparent VH-CH recombinants. In one recombinant, the entire group of CH markers (C mu, C gamma, and C alpha) recombined with the set of VH. Although in the other two recombinants all CH markers may also have recombined as a group, in one of these only IgG and IgA CH genes were informative; in the other recombinant, only the IgG allotypes were informative. Some allotypic determinants found on IgM molecules ("conformational") appear only when a specific variable region allotype (VHa) is combined with a specific mu constant region allotype (C mu). New combinations of VHa and C mu allotypes were generated in two of the genetic recombinants and led to new "conformational" determinants. The gains and losses observed lend support to the hypothesis that the determinants result from conformations generated by the combination of allotype-specific VH and C mu protein sequences. Conceivably, DNA events that join VH to diversity (D)- and joining (J)-coding sequences or mRNA processing events that splice J to C mu could be involved in generating the sequences that form allotype-specific determinants.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

An electrostatic microactuator using LIGA process for a magnetic head tracking system of hard disk drives

 We demonstrate an electrostatic micro actuator which is fabricated by LIGA process. The actuator is designed for a magnetic head tracking system of hard disk drives (HDDs). The actuator is essential to achieve very high track density of HDDs. We realize the aspect ratio of 125 by the LIGA process using a Si-Au mask. We propose to use PMMA molds both as the mechanical structure and as the insulator between electrodes. We believe there are great opportunity for the LIGA process in making micro actuators of HDDs. Received: 25 August 1997 / Accepted: 24 October 1997     

Legacy system program transformation by Lyee methodology

Based on the comparative review of several approaches to legacy system conversion and revitalization, the Lyee methodology application for the issue is presented to clarify its idea, the associated procedure, and the implemented tools. It could be said that with the tools and manual developed by ICBSM&T, the mechanical transformation of the conventional program to a Lyee-structured one becomes possible as long as the programs are made in a procedure-oriented language. In addition to the program structure conversion, the Lyee methodology permits people to choose any application language in the transformed program. At the same time, quite a new approach related to the system conversion is introduced, in which the chunk of data extracted from an old program is edited to make a new conventional structure program that has a logical sequence instead of a Lyee type of declarative program. These features can be realized through the concept of LyeeBELT, which is a set of word-information about the attributes, formulae, and conditions for an independent data item.

The overall workflow of the legacy program transformation is shown in the following.

A critical part in its implementation is the feasibility study (pre-analysis) stage where necessary information is supposed to be secured, and an appropriate plan and policy about the system to be revitalized in the new system environment should be clarified so as to customize the tools accordingly. If the initial process is completed, the mechanical legacy system conversion will be realized by registering the parameters in the tool, and the reestablishment of business knowledge in the LyeeBELT will be enabled. With the regulated business logic on the LyeeBELT, the program maintenance afterwards becomes drastically simplified and stable without the ‘spaghetti’ problem, so that software evolution can be possible.     

Ultra-high voltage electron microscopy: Past,present, and future

High voltage electron microscopy has shown numerous advantages for the study of natural science, including biology, but it is especially useful in materials science. The most important advantage for materials science is in-situ experiments on detailed processes of the same phenomena that occur in bulk materials. For such in-situ experiments, the specimens should be thicker than a few microns to observe the behavior of lattice effect. The maximum observable thickness of the specimens and other advantages markedly increase with increasing accelerating voltage, and since 1965, two 3 MV instruments have been installed. The present paper is mainly concerned with these 3 MV electron microscopes and their applications to new research fields.     

Macroscopic and microscopic changes in the surface layers of annealed and case-hardened steel rollers due to rolling contact

Measurements of the residual stress and observations of the microstructure at the surface and in the subsurface of rollers were performed during rolling contact fatigue tests of annealed 0.45% carbon steel and case-hardened nickel-chromium steel rollers. Compressive residual stresses in annealed rollers were induced by the rolling contact. With case-hardened rollers they were induced by heat treatment prior to the rolling contact fatigue tests. After the rolling contact fatigue tests the compressive residual stresses on the surface of the annealed rollers and in the subsurface of the case-hardened rollers relaxed; a characteristic substructure was formed by the stress cycles, which caused surface failure. It was confirmed that the microcracks leading to surface failure initiate on the surfaces of annealed rollers and in the subsurface of case-hardened rollers.     

A record-linkage study on risk factors for cause-specific infant mortality

Infant death certificates were linked with birth certificates for infants born to residents of Tohoku, Tokai and Kyushu regions in 1989 (n = 409, 679, or about one-third of all births in Japan), to examine the effects of variables, as reported on birth certificates, on cause-specific infant mortality. "Certain conditions originating in the perinatal period" and "congenital anomalies" accounted for nearly 90 percent of neonatal deaths, while "congenital anomalies", "injuries and poisoning" and "sudden infant death" were responsible for about 65 percent of postneonatal deaths. Mortality rates for almost all causes of infant deaths, except injuries and poisonings, increased as birth weight decreased not only in the neonatal period but also in the postneonatal period. This suggests that low birth weight places some infants at higher risk of death, and conditions that lead to low birth weight independently contribute to the risk of infant death. Cox's proportional hazards linear model was used to assess the effects of variables on infant mortalities by causes of death. An extremely strong birth weight effect was noted for "certain conditions originating in the perinatal period" and "congenital anomalies". Being a male infant and late order of birth in multiparity were other risk factors for deaths from "congenital anomalies", while being a male infant, resident of Tohoku region and maternal stillbirth experience related to deaths from "certain conditions originating in the perinatal period". Elevated risks of sudden infant death syndrome (SIDS), of which mortality rate in Japan was considerably lower than those in most developed Western countries, i.e. 0.23 per 1,000 live births in 1989, were associated with low birth weight, being a male infant, low maternal age, late order of birth in multiparity and illegitimacy. Low maternal age, late order of birth in multiparity and illegitimacy, also, related significantly to increased risk of infant deaths for "injuries and poisoning". These results suggest the independent contributions of socioeconomic factors to infant mortality, especially postneonatal mortality, from SIDS, "injuries and poisonings".     

Crystallinity and electrical conductivity of sulfur-containing microcrystalline diamond thin film

Hydrogen sulfide (H₂S) was introduced into a microwave plasma chemical vapor deposition of microcrystalline diamond thin film. Secondary-ion mass spectroscopy showed that sulfur concentration was controlled from 2 × 10¹⁵ to 9 × 10¹⁷ cm^− 3 by controlling the H₂S/CH₄ ratio, while that of hydrogen concentration was around 5 × 10²⁰ cm^− 3 and was independent of the H₂S/CH₄ ratio. Electrical conductance increased linearly as the S concentration increased from 2 × 10¹⁵ to 3 × 10¹⁶ cm^− 3 without significant deterioration of film crystallinity, i.e., the amount of sp² phase did not increase. Non-ohmic conduction was converted to ohmic conduction when the S concentration reached 9 × 10¹⁷ cm^− 3 by increasing the H₂S/CH₄ ratio to 30,000 ppm. This modification was consistent to the formation of a graphitic phase by heavy S-doping, which was identified by Raman spectra and surface morphology.