Enhanced bioactivity of polyvinylidene chloride films using argon ion bombardment for guided bone regeneration

Polyvinylidene chloride (PVDC) is a long chain carbon synthetic polymer. The objective of this study was to improve the bioactivity of PVDC films through surface modification using argon (Ar) ion bombardment to create Ar-modified PVDC films (Ar-PVDC) to address the clinical problems of guided bone regeneration (GBR), which is technique-sensitive, and low bone regenerative ability. First, the effects of Ar ion bombardment, a low temperature plasma etching technique widely used in industry, on PVDC film wettability, surface chemistry, and morphology were confirmed. Next, fibroblast-like and osteoblast-like cell attachment and proliferation on Ar-PVDC were assessed. As a preclinical in vivo study, Ar-PVDC was used to cover a critical-sized bone defect on rat calvaria and osteoconductivity was evaluated by micro-computed tomography analysis and histological examinations. We found that the contact angle of PVDC film decreased by 50° because of the production of –OH groups on the PVDC film surface, though surface morphological was unchanged at 30 min after Ar ion bombardment. We demonstrated that cell attachment increased by about 40 % and proliferation by more than 140 % because of increased wettability, and 2.4 times greater bone regeneration was observed at week 3 with Ar-PVDC compared with untreated PVDC films. These results suggest that Ar ion bombardment modification of PVDC surfaces improves osteoconductivity, indicating its potential to increase bone deposition during GBR.     

Photostable Iodinated Silica/Porphyrin Hybrid Nanoparticles with Heavy‐Atom Effect for Wide‐Field Photodynamic/Photothermal Therapy Using Single Light Source

Physical therapies including photodynamic therapy (PDT) and photothermal therapy (PTT) can be effective against diseases that are resistant to chemotherapy and remain as incurable malignancies (for example, multiple myeloma). In this study, to enhance the treatment efficacy for multiple myeloma using the synergetic effect brought about by combining PDT and PTT, iodinated silica/porphyrin hybrid nanoparticles (ISP HNPs) with high photostability are developed. They can generate both ¹O₂ and heat with irradiation from a light‐emitting diode (LED), acting as photosensitizers for PDT/PTT combination treatment. ISP HNPs exhibit the external heavy atom effect, which significantly improves both the quantum yield for ¹O₂ generation and the light‐to‐heat conversion efficiency. The in vivo fluorescence imaging demonstrates that ISP HNPs, modified with folic acid and polyethylene glycol (FA‐PEG‐ISP HNPs), locally accumulate in the tumor after 18 h of their intravenous injection into tumor‐bearing mice. The LED irradiation on the tumor area of the mice injected with FA‐PEG‐ISP HNPs causes necrosis of the tumor tissues, resulting in the inhibition of tumor growth and an improvement in the survival rate.     

Kilowatt-peak Terahertz-wave Generation and Sub-femtojoule Terahertz-wave Pulse Detection Based on Nonlinear Optical Wavelength-conversion at Room Temperature

Intense Terahertz (THz)-wave generation and highly sensitive THz-wave detection were obtained by wavelength conversion with nonlinear optical susceptibility χ⁽²⁾ of LiNbO₃ crystals. Maximum peak output of about 50 kW (5 μJ/pulse) was demonstrated in an injection-seeded THz-wave parametric generator pumped by post-amplified emission from a microchip Nd:YAG laser. Using the sub-nanosecond pulse duration of the laser proposed herein provides effective mitigation of stimulated Brillouin scattering in LiNbO₃, producing higher gain for wavelength conversion between near-infrared (near-IR) pump light and THz waves. Monochromatic THz radiation was obtained in the continuous tuning range of 0.7–2.9 THz. Additionally, highly sensitive THz-wave detection was demonstrated based on up-conversion from THz waves to near-IR light as well as efficient THz-wave generation. The signal generated with non-collinear phase-matching condition showed spectroscopic detection on the screen apart from the LiNbO₃ crystal. Highly sensitive detection with minimum energy of about 80 aJ/pulse (0.8 μW at peak) and a large dynamic range of more than 100 dB were achieved in this experiment.     

Effects of high hydrostatic pressure on characteristics of pork slurries and inactivation of microorganisms associated with meat and meat products

Pork slurries inoculated with various test microorganisms were prepared and subjected to high hydrostatic pressure at 1000 to 6000 atm for 10 min at 25 degrees C to examine for the pressure effects on characteristics of the slurries and the inactivation of the microorganisms associated with meat and meat products. Pressure treatment at higher than 3000 atm caused coagulation and discoloration of the pork slurries. Harder and more white coagulants were obtained by increasing the pressure. Pressure treatment at 3000 to 6000 atm killed all the microorganisms tested by more than 6-log colony-forming units (cfu)/g except Bacillus cereus spores. Gram-negative microorganisms were more labile to pressure than Gram-positive ones. Campylobacter jejuni, Pseudomonas aeruginosa, Salmonella typhimurium and Yersinia enterocolitica were inactivated at pressures higher than 3000 atm; Escherichia coli, Saccharomyces cerevisiae and Candida utilis at pressures higher than 4000 atm; Micrococcus luteus, Staphylococcus aureus and Streptococcus faecalis at 6000 atm. Only less than one-log cfu/g of B. cereus spores were inactivated at 6000 atm. Ultraviolet absorption spectra and acridine orange staining suggested that E. coli became permeable and leaked cytoplasmic RNA at lower pressure than S. aureus. From the present findings, the authors propose high hydrostatic pressure treatment as a promising means of preparing wholesome meat and meat products.     

In Vitro and In Vivo Digestibility of Recrystallized Amylose and Its Application for Low Glycemic Foods

ABSTRACT: To predict physiologic functions of recrystallized amylose (RCA), the true resistant starch (RS) content of RCA in the small intestine was directly measured using ileorectostomized rats where the distal ileum was anastomosed to the rectum (the cecum and colon were surgically resected together). The estimated in vivo resistant starch content of RCA was the same as the value obtained from the in vitro enzymatic RS determination (∼50%). RCA resistance to amylolytic enzymes in the small intestine was retained even after RCA incorporation into processed foods, and a bread containing 20% RCA showed a significantly lower glycemic response in rats compared with that of a control bread. Also, RCA ingestion significantly and dose-dependently decreased the body fat accretion and lowered serum concentrations of cholesterol and triglycerides in rats compared with cornstarch. These lipid-lowering effects of RCA were comparable to those obtained with high-amylose cornstarch. The restricted energy value as well as suppressed insulin response with RCA ingestion might be related to preferable changes in lipid metabolism. These nutritional properties of RCA may suggest a possible benefit as an alternative source of resistant starch for preventing diabetes, hyperlipidemia and obesity, and so on.     

Latent structure analysis in the pharmaceutical process of tablets prepared by wet granulation

Background: Granule characteristics are some of the important intermediate qualities that determine tablet properties. However, the relationships between granule and tablet characteristics are poorly understood. The aim of this study was to elucidate relationships among formulation factors, granule characteristics, and tablet properties using a non-linear response surface method (RSM) incorporating a thin-plate spline interpolation (RSM-S) and a Bayesian network (BN).

Method: Tablets containing lactose (Lac), cornstarch (CS), and microcrystalline cellulose (MCC) were prepared by wet granulation. Ten formulations were prepared by an extreme vertices design. The angle of repose (Y₁), compressibility (Y₂), cohesion force (Y₃), internal friction angle (Y₄), and mean particle size (Y₅) were measured as granule characteristics. Tensile strength (TS) and disintegration time (DT) were measured as tablet properties.

Results: RSM-S results showed that TS increased with increasing amounts of MCC and Lac. DT decreased with increasing amounts of MCC and CS. The optimal BN models were predicted using four evaluation indices –Y₃ was shown to be the most important factor for TS, whereas Y₂, Y₃, and Y₄ were relatively important for predicting DT. Moreover, tablets with excellent tablet properties (i.e. high TS and low DT) were produced by relatively high Y₁, low Y₂, high Y₃, high Y₄, and middle Y₅ values, and resulted from the middle of MCC, middle-to-low CS, low Lac, and middle-to-low magnesium stearate (Mg-St) amounts.

Conclusion: The RSM-S and BN techniques are useful for revealing complex relationships among formulation factors, granule characteristics, and tablet properties.     

叶片重叠比对Savonius风力机性能的影响

Savonius风力机两个叶片之间的重叠比OL (Overlap ratio)是影响其性能的最重要参数之一.为了探明OL对风力机静态起动特性与动态功率特性的影响,制作了一台可调叶片OL的Savonius风力机,将其OL设置为0,0.2和0.5三种模式,进行了风洞试验.结果表明,在3种模式中,叶片重叠比PL=0.2的风力机的静态与动态性能最佳.     

基于工件与外部可消耗工具摩擦的焊接技术研究进展

摩擦焊是一类依靠摩擦产热来实现材料连接的固相焊接技术,具有接头质量高、焊接变形小、节能环保等优点,广泛应用于航空航天、交通运输、矿山机械、海洋装备等领域. 近年来,摩擦焊技术发展迅速,一些改型的工艺相继产生. 根据相互摩擦对象的属性对摩擦焊技术进行了分类,归纳了各自的主要工艺特点.对基于工件与外部可消耗工具相互摩擦的焊接技术进行了系统综述,重点介绍了径向摩擦焊、摩擦-铆接、摩擦塞补焊、摩擦堆焊和涡流搅拌摩擦焊的基本工艺原理和最新研究进展,同时对以上工艺技术的未来发展展开了讨论,以期为相关领域的科研工作者提供参考.     

Determination of nequinate and buquinolate in livestock products using liquid chromatography-tandem mass spectrometry

We studied the simultaneous determination of nequinate and buquinolate, which are used as feed additives to prevent coccidiosis, by means of liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The sample was extracted with acetonitrile, then loaded onto an HLB mini-column with 20% methanol. After clean-up with 20% methanol, the analytes were eluted with acetonitrile-methanol (1 : 1). The coccidiostats in the purified samples were determined using ESI-MRM mode LC-MS/MS with a sample matrix calibration curve. Mean recoveries of nequinate and buquinolate from 8 kinds of livestocks samples (chicken muscle, chicken liver, chicken heart, swine muscle, swine heart, cattle muscle, sheep muscle, egg) were in the range of 89.5% to 108.6%, and the relative standard deviation values were <20% (n=10) at the levels of 0.01 μg/g and 0.05 μg/g, respectively. The limits of quantification of these compounds were 0.001 μg/g in each sample.     

Corrosion behavior of rapidly solidified Mg-Zn-rare earth element alloys in NaCl solution

Rapidly solidified flaky powder metallurgy (RS FP/M) processing was applied for preparation of corrosion-resistant bulk Mg alloys with Zn and rare earth elements. The corrosion behavior of the melt spun Mg-Zn-La and Mg-Zn-Yb alloy ribbons in 1% NaCl solution was investigated in order to determine optimum composition of corrosion-resistant Mg alloys. The effect of heat-treatment on the corrosion behavior of RS Mg-Zn-La and Mg-Zn-Yb alloys also was studied. In the Mg-Zn-La alloys, as-quenched alloys showed good corrosion resistance in the NaCl solution, but heat-treatment led to degradation due to microstructure change, that is, reduction in dispersion of the Mg₁₇La₂-type intermetallic compound. In the Mg-Zn-Yb alloys, both as-quenched and heat-treated Mg_97.5Zn_0.5Yb₂ alloys exhibited low corrosion rates because fine distribution of Mg₂Yb-type intermetallic compound in α-Mg matrix was not largely changed by heat treatment.