Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

The preparation,swelling characteristics,and albumin adsorption and release behaviors of a novel chitosan-based polyampholyte hydrogel

A novel chitosan (Ch)-based polyampholyte hydrogel was prepared from Ch dissolved in a 1:1 (v/v) mixture of 10% aqueous acetic acid and N-methyl-2-pyrrolidinone (NMP) by simple crosslinking using 1,2,3,4-butanetetracarboxylic dianhydride (BTCA). The detailed structure of the hydrogel was determined via FTIR and solid-state ¹³C NMR spectroscopic analyses. The swelling behavior of the hydrogels was strongly dependent on the BTCA feed ratio, and the hydrogels exhibited a pH-responsive swelling ratio that was influenced by the presence of both cationic NH₃⁺ and anionic COO^? groups within their molecular structures. The Ch hydrogels also exhibited bovine serum albumin (BSA) adsorption capacity, which was maximal at pH 4.5, consistent with the isoelectric point of BSA (4.7). In addition, the BSA adsorption capacity of the hydrogel decreased with the increasing ionic strength of the adsorption medium, indicating that the capacity of the hydrogel to adsorb BSA is facilitated by hydrophobic as well as electrostatic interactions between the hydrogels and the BSA molecules. In addition, a high desorption ratio (89%) of BSA was achieved in aqueous solutions at pH 2.0.     

Synthesis of chemically modified chitosans with a higher fatty acid glycidyl and their adsorption abilities for anionic and cationic dyes

Novel chitosan‐based materials with a higher fatty acid glycidyl as the chemically modified agent were synthesized and the adsorption ability of the resulting polymers has been evaluated for typical anionic and cationic dyes. The successful modification was confirmed by the infrared spectroscopic measurements. As the degree of substitution was decreased, the adsorption ability of the chemically modified chitosans for anionic dyes at the higher dye concentration was increased, and the modified chitosans with a lower degree of substitution showed a higher adsorption ability than that of an activated carbon at the higher dye concentration. For cationic dyes, the chemically modified chitosan showed a good adsorption power, especially when the adsorption power was evaluated by the flow methods. The improved adsorption ability of a chemically modified chitosan material was also confirmed by comparing it with that of a crosslinked chitosan material. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2423–2428, 2005     

DNA‐Templated Synthesis of Perylenediimide Stacks Utilizing Abasic Sites as Binding Pockets and Reactive Sites

DNA is considered to be a promising biomolecule as a template and scaffold for arranging and organizing functional molecules on the nanoscale. The construction and evaluation of DNAs containing multiple functional molecules that are useful for optoelectronic devices and sensors has been studied. In this paper we report the efficient incorporation of perylenediimide (PDI) units into DNA by using abasic sites both as binding sites and as reactive sites and the construction of PDI stacks within the DNA structure, accomplished through the preorganization of the PDI units in the hydrophobic pocket within the DNA. Our approach could become a valuable method for construction of DNA/chromophore hybrid structures potentially useful for the design of DNA‐based devices and biosensors.     

Elongation and Contraction of Scallop Sarcoplasmic Reticulum (SR): ATP Stabilizes Ca2+-ATPase Crystalline Array Elongation of SR Vesicles

The Ca²⁺-ATPase is an integral transmembrane Ca²⁺ pump of the sarcoplasmic reticulum (SR). Crystallization of the cytoplasmic surface ATPase molecules of isolated scallop SR vesicles was studied at various calcium concentrations by negative stain electron microscopy. In the absence of ATP, round SR vesicles displaying an assembly of small crystalline patches of ATPase molecules were observed at 18 µM [Ca²⁺]. These partly transformed into tightly elongated vesicles containing ATPase crystalline arrays at low [Ca²⁺] (≤1.3 µM). The arrays were classified as ‘’tetramer’’, “two-rail” (like a railroad) and ‘’monomer’’. Their crystallinity was low, and they were unstable. In the presence of ATP (5 mM) at a low [Ca²⁺] of ~0.002 µM, “two-rail” arrays of high crystallinity appeared more frequently in the tightly elongated vesicles and the distinct tetramer arrays disappeared. During prolonged (~2.5 h) incubation, ATP was consumed and tetramer arrays reappeared. A specific ATPase inhibitor, thapsigargin, prevented both crystal formation and vesicle elongation in the presence of ATP. Together with the second part of this study, these data suggest that the ATPase forms tetramer units and longer tetramer crystalline arrays to elongate SR vesicles, and that the arrays transform into more stable “two-rail” forms in the presence of ATP at low [Ca²⁺].     

Solution properties of polymacromonomers consisting of polystyrene

Summary Dynamic light scattering measurements have been made on 14 samples of a polymacromonomer consisting of polystyrene with 15 styrene side-chain units in cyclohexane at 34.5°C (the theta point) to determine the translational diffusion coefficient D as a function of molecular weight. The dependence of D on the main-chain length is analyzed on the basis of the wormlike chain by taking into account the end effect arising from side chains near the main-chain ends. The model parameters describing this dependence, i.e., the Kuhn segment length (11.5 ± 1.5 nm), the linear mass density (5600 ± 700 nm⁻¹), the diameter (5.2 ± 0.5 nm), and the end-effect parameter δ (2.5 ± 0.3 nm), are close to those determined previously from <S ²>_z (the z-average mean-square radius of gyration) and [η] (the intrinsic viscosity), leading to the conclusion that the wormlike chain model is capable of consistently explaining <S ²>_z, [η], and D of the polymacromonomer in the Θ solvent. Received: 8 February 2000/Accepted: 18 February 2000     

Development of butt welding of polymeric materials based on softening and stirring effects by hot tool

In this study, new butt welding technique was proposed to join polymeric materials in which the polymeric material is softened by a heated tool due to the Joule effect heating of the electric current flow through the tool, and the coalescence of material is done by the stirring action due to the tool rotation. A 3 mm-thick Polycarbonate (PC) sheets were joined in various joining conditions, from which joining mechanism, mechanical properties of joints and process parameters affecting joint performance were investigated. In the experiments, in situ observation with a CCD camera and material temperature measurement during the process, as well as the observation of surface appearance and cross section of the joint and tensile test were performed for these purposes. It was shown from the in situ observation and material temperature measurement that the molten and softened region is formed around the weld tool. It was also shown that sufficient heat input was required to form sound joints with acceptable performance, which depended upon the joining speed and amount of electric current flow through the tool. The observation of joint appearance and cross section revealed that the joint with comparable thickness to base material was obtained under the condition of revolution pitch below 0.08 mm, defined by the ratio of joining speed to tool rotation. It is noticed that joints obtained from the proper conditions have the same mechanical properties as the base material, and that the process parameters of this method were tool rotation speed, welding speed and amount of electric current. These results suggest proposed method is useful for joining the polymeric materials.     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.