Mannopyranoside Glycolipids Inhibit Mycobacterial and Biofilm Growth and Potentiate Isoniazid Inhibition Activities in M. smegmatis

Lipomannan and lipoarabinomannan are integral components of the mycobacterial cell wall. Earlier studies demonstrated that synthetic arabinan and arabinomannan glycolipids acted as inhibitors of mycobacterial growth, in addition to exhibiting inhibitory activities of mycobacterial biofilm. Herein, it is demonstrated that synthetic mannan glycolipids are better inhibitors of mycobacterial growth, whereas lipoarabinomannan has a higher inhibition efficiency to biofilm. Syntheses of mannan glycolipids with a graded number of mannan moieties and an arabinomannan glycolipid are conducted by chemical methods and subsequent mycobacterial growth and biofilm inhibition studies are conducted on Mycobacterium smegmatis. Growth inhibition of (73±3) % is observed with a mannose trisaccharide containing a glycolipid, whereas this glycolipid did not promote biofilm inhibition activity better than that of arabinomannan glycolipid. The antibiotic supplementation activities of glycolipids on growth and biofilm inhibitions are evaluated. Increases in growth and biofilm inhibitions are observed if the antibiotic is supplemented with glycolipids, which leads to a significant reduction of inhibition concentrations of the antibiotic.     

A comparative analysis of unsteady and steady Buongiorno's Williamson nanoliquid flow over a wedge with slip effects

Comparison between unsteady and steady MHD Buongiorno's model Williamson nanoliquid flow through a wedge with slip effects, chemical reaction and radiation is made in this analysis. Thermophoresis and Brownian motion are also considered in this study. Appropriate similarity variables are presented to transmute the governing PDEs into the set of non-linear ODEs. The most widely authenticated finite element method is implemented to analyze these set of ODEs numerically. The behavior of concentration, temperature and velocity sketches for varied values of relevant parameters is numerically calculated and the outcomes are plotted through graphs. The numerical values of dimensionless rates of mass transfer, heat and velocity are also evaluated and depicted through tables. It is noted that with upsurging values of angle of wedge parameter, the distributions of temperature of the liquid intensify in both steady and unsteady cases.     

Robust vectorization method for electrical circuit drawings using component morphology

Pattern Analysis and Applications - Decomposition and representation of electrical circuit drawings to a suitable vector form has widespread applications related to data compression, storage,...     

Synthesis of a novel DOPO‐based polyphosphoramide with high char yield and its application in flame‐retardant epoxy resins

A novel and highly effective flame retardant (FR), DOPO‐TPMP oligomer, was synthesized by a simple condensation of 4‐(hydroxymethyl)‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane‐1‐oxide and phosphorus oxychloride followed by a polycondensation reaction with 6‐(2,5‐dihydroxyphenyl)‐6H‐dibenzo[c,e][1,2]oxaphosphinine‐6‐oxide. The chemical structure of DOPO‐TPMP was well characterized using Fourier transform infrared and NMR spectra. DOPO‐TPMP was used as an additive‐type FR for epoxy resin (EP). The FR properties of the resultant EP composites were investigated by limiting oxygen index (LOI) test, UL‐94 vertical burning test and cone calorimeter measurements. Specifically, the EP composite containing 10.0% DOPO‐TPMP achieved a LOI value of 36.1%, V‐0 rating in the UL‐94 test and a 58% reduction in peak heat release rate. Further mechanism analysis attributed the enhanced flame retardancy to the increased char yield on the addition of DOPO‐TPMP. © 2019 Society of Chemical Industry     

Bandwidth Enhancement of a Wide Slot Antenna Using Fractal Geometry for UWB Application with Multiple Notched Bands

Wireless Personal Communications - In this paper a combination of rectangular and elliptical fractal geometry is applied on a regular hexagonal wide slot antenna fabricated using a FR4 substrate to...     

Composition-dependent xBa(Zr0.2Ti0.8)O3-(1-x)(Ba0.7Ca0.3)TiO3 bulk ceramics for high energy storage applications

This work reports the composition dependent microstructure, dielectric, ferroelectric and energy storage properties, and the phase transitions sequence of lead free xBa(Zr_0.2Ti_0.8)O₃-(1-x)(Ba_0.7Ca_0.3)TiO₃ [xBZT-(1-x)BCT] ceramics, with x?=?0.4, 0.5 and 0.6, prepared by solid state reaction method. The XRD and Raman scattering results confirm the coexistence of rhombohedral and tetragonal phases at room temperature (RT). The temperature dependence of Raman scattering spectra, dielectric permittivity and polarization points a first phase transition from ferroelectric rhombohedral phase to ferroelectric tetragonal phase at a temperature (T_R-T) of 40?°C and a second phase transition from ferroelectric tetragonal phase - paraelectric pseudocubic phase at a temperature (T_T-C) of 110?°C. The dielectric analysis suggests that the phase transition at T_T-C is of diffusive type and the BZT-BCT ceramics are a relaxor type ferroelectric materials. The composition induced variation in the temperature dependence of dielectric losses was correlated with full width half maxima (FWHM) of A₁, E(LO) Raman mode. The saturation polarization (P_s) ≈8.3?μC/cm² and coercive fields ≈2.9?kV/cm were found to be optimum at composition x?=?0.6 and is attributed to grain size effect. It is also shown that BZT-BCT ceramics exhibit a fatigue free response up to 10⁵ cycles. The effect of a.c. electric field amplitude and temperature on energy storage density and storage efficiency is also discussed. The presence of high T_T-C (110?°C), a high dielectric constant (ε_r ≈?12,285) with low dielectric loss (0.03), good polarization (P_s ≈?8.3?μC/cm²) and large recoverable energy density (W?=?121?mJ/cm³) with an energy storage efficiency (η) of 70% at an electric field of 25?kV/cm in 0.6BZT-0.4BCT ceramics make them suitable candidates for energy storage capacitor applications.     

High-resolution thermal expansion measurements under helium-gas pressure

We report on the realization of a capacitive dilatometer, designed for high-resolution measurements of length changes of a material for temperatures 1.4 K ≤ T ≤ 300 K and hydrostatic pressure P ≤ 250 MPa. Helium ((4)He) is used as a pressure-transmitting medium, ensuring hydrostatic-pressure conditions. Special emphasis has been given to guarantee, to a good approximation, constant-pressure conditions during temperature sweeps. The performance of the dilatometer is demonstrated by measurements of the coefficient of thermal expansion at pressures P ? 0.1 MPa (ambient pressure) and 104 MPa on a single crystal of azurite, Cu(3)(CO(3))(2)(OH)(2), a quasi-one-dimensional spin S = 1/2 Heisenberg antiferromagnet. The results indicate a strong effect of pressure on the magnetic interactions in this system.     

An Integrated Approach Toward Renewable Energy Storage Using Rechargeable Ag@Ni0.67Co0.33S‐Based Hybrid Supercapacitors

Self‐powered charging systems in conjunction with renewable energy conversion and storage devices have attracted promising attention in recent years. In this work, a prolific approach to design a wind/solar‐powered rechargeable high‐energy density pouch‐type hybrid supercapacitor (HSC) is proposed. The pouch‐type HSC is fabricated by engineering nature‐inspired nanosliver (nano‐Ag) decorated Ni_0.67Co_0.33S forest‐like nanostructures on Ni foam (nano‐Ag@NCS FNs/Ni foam) as a battery‐type electrode and porous activated carbon as a capacitive‐type electrode. Initially, the core–shell‐like NCS FNs/Ni foam is prepared via a single‐step wet‐chemical method, followed by a light‐induced growth of nano‐Ag onto it for enhancing the conductivity of the composite. Utilizing the synergistic effects of forest‐like nano‐Ag@NCS FNs/Ni foam as a composite electrode, the fabricated device shows a maximum capacitance of 1104.14 mF cm^?2 at a current density of 5 mA cm^?2 and it stores superior energy and power densities of 0.36 mWh cm^?2 and 27.22 mW cm^?2, respectively along with good cycling stability, which are higher than most of previous reports. The high‐energy storage capability of HSCs is further connected to wind fans and solar cells to harvest renewable energy. The wind/solar charged HSCs can effectively operate various electronic devices for a long time, enlightening its potency for the development of sustainable energy systems.     

Quaternary 2D Transition Metal Dichalcogenides (TMDs) with Tunable Bandgap

Alloying/doping in 2D material is important due to wide range bandgap tunability. Increasing the number of components would increase the degree of freedom which can provide more flexibility in tuning the bandgap and also reduces the growth temperature. Here, synthesis of quaternary alloys Mo_x W_1?x S_2y Se_{2(1?y )} is reported using chemical vapor deposition. The composition of alloys is tuned by changing the growth temperatures. As a result, the bandgap can be tuned which varies from 1.61 to 1.85 eV. The detailed theoretical calculation supports the experimental observation and shows a possibility of wide tunability of bandgap.